Clear acrylic sheet plastic: I have found it at building supply/hardware stores, being sold as plastic storm windows for the interior of your house. Typically .040" which is a little over 1/32" (.03125).

Tom Berkner


Rigid plastic sheet: You might try framing stores like Aaron brothers or a craft store that sells framing supplies like Michaels. You might try Tap Plastics. They have a huge variety of plastic items, including sheet plastics. They're just getting a website started at www.tapplastics.com, but the page right now just gives you a number to order a catalog. Their number is: 1 800 246-5055.

Trish Billard


Acrylic panes: As I recall, Plexiglas is a trademark for a particular brand of Acrylic. If you want a machinable clear plastic, try Lexan (trademark of GE I think).

Tom Berkner


Falling furniture: I've got a number of suggestions for keeping my cabinets up. Apparently, my biggest problem was that I used 'real' wallpaper, with a tiny print, rather than dh paper. The real paper has a rather slick
finish to make it easier to clean - and the devil's own to glue! I ended up doing two things. One was to remove some of the paper, so I was gluing wood to wood with Quick Grab. The other was to put tiny brads - two per cabinet - into the wall, and matching holes in the back of the cabinet. I slanted the pins slightly, so the cabinets slid down onto them. (Think picture hanger, but not quite so sharp an angle.) Between the two procedures, those cabinets aren't going anywhere! If you want to be able to move your shelves, using sequin pins would be your best bet. When you want to move the shelf, the pins shouldn't leave a very big hole in the paper - or just put a picture there!

Dani


Cabinets Falling Off Walls: Aleene's Stick-it-Over-and-Over Glue has a strong bond once set but is not permanent and might work to solve your cabinet problems.  Velcro might work too, but might look too bulky depending on the view of the wall where the cabinets are located.

Michelle Fox


Cheap mini bricks: Okay, they are cheap, but if worked on a bit, they are great! I took orangy-brick colored construction paper and laid it on newspapers on the floor. Then, I spatter painted them using a grey and a white and a little black. Spatter'd them with an old toothbrush. When dry, I put them thru a paper shredder which gave me nice even 1/4" slices of "brick". Then, I painted the surface I was bricking (I used gray) to simulate mortar. Then, it was a simple matter (a bit tedious, but simple and certainly cheap!) of cutting 5/8" pieces of the strips and applying them to the surface staggered with a tiny gap between each "brick". This method makes it easy to round corners. Learned this method in a 4 day workshop in Giddings Texas where we made a 1/2" scale replica of Stephen F. Austin's 1836 dog-trot cabin a couple of years ago.

Carrie McKinley


When I do rock work, I glue them on with tacky, then cover the glue with a mix of beige and black sand to imitate mortar. And, did you know you can *BUY* sand? Train stores sell a variety of colors, very fine grain.

Lee


Upsidedown Dollhouse: If you have a handyman husband, brother or father around, ask them to make you a cradle for your dollhouse. It is two parts (each identical), with a 12" V cut in a piece of plywood at the correct roof pitch (60 or 45 degrees?) and perpendicular pieces that provide a stable base for them. I hope you're picturing this! Placed on either end, they allow an upside-down dollhouse to rest in the V cutouts, with enough clearance for chimneys.

Anne Gerdes


Best sealer for new walls: The very best sealer for new dh walls is Gesso. It's used by artists to size and prepare canvas for painting. It's cheap, easy to use and self levels. I use it on everything!!

Judie St. Onge


Log Cabin Ceilings: For my log cabin ceilings, I just stained the ceilings the same stain as the inside wall logs and added beams. The beams are a great way to hide wiring, too.

Carole Pierce


Previous 10 | Next 10


Page 656 of 1032.

Total links in database: 10312.



Search for:


Browse the database (all entries)