Painting ceilings: When I start a kit, the first thing I do, before I even punch out the pieces, is paint the 'wrong' side with a coat of flat white paint. This helps me tell 'up' from 'down' and 'inside' from 'outside' and also provides a base for wallpapering later. Dani |
Painting Ceilings of already together dollhouses:Find a big corrugated cardboard carton. Cut a V shape out of each end. Put your dollhouse UPSIDE DOWN on the carton with the rooftop in the V you cut. Then you can see what you're doing to paint your ceilings and not break your neck trying to look up at the ceiling. Dottie |
WHY SPECIAL WALLPAPER GLUE? The fungicide/mildewcide in some regular wallpaper pastes, will cause the copper tape, brass brads/eyelets to turn black (this is corrosion - cupric oxide as I recall). Under a light colored paper, the black does cause shadows to appear. Most regular wallpaper paste will cause the paper to stretch when wet and then to shrink when it dries out again. Don't forget to allow for this. YES paste doesn't cause the stretch/shrink. Do NOT dilute the YES paste with water (or anything else) regardless of what some authorities say. This causes the paper to stretch and become weaker. YES paste has no lumps to worry about. When you apply the YES paste, use something like an old credit card or auto body filler spreader. Leave just enough paste on the paper to make it look shiney. Use a CLEAN spreader to smooth the paper onto the walls. If your walls are made of very porous wood (like luan) it is best to seal the walls first. I recommend using shellac, diluted with 5 parts alcohol to 1 shellac (don't use a good Scotch, just plain old denatured). If your house is made of domestic birch, sealing isn't necessary but it won't hurt anything if you really want to do it. Tom |
Oil stain on the floor: If you want the floor of your garage to look grungy, take a toothbrush and dip the tips of the bristles in paint and splatter a bit here and there. For an oil stain, take some real car oil (couple of drops will do) and smear it around in the middle of the floor, and sprinkle some dust in it (oil stains usually either look dirty or have cat litter sprinkled on them). Karen Isaacson |
Thatch: There are lots of ideas for thatch, but one I saw (and plan to use on my English pub) is upholstery fringe, cut in half the long way down the middle and glued on. I think I'll dye it first, probably a dull gray, then cut it in half and then glue it on to the roof in rows. The stuff was not very expensive, and it seems like it would be easier to use than a lot of other materials...and done up, it looked very 'thatchy'. Karen Isaacson |
Thatch: There are a lot of different things that can be used for thatch, depending on the look you want. I tried one once with broom straw and didn't like it - too neat. Ended up doing that house with raffia, which gave it the look I wanted. I have known some people to use unraveled hemp rope, and I believe some sort of gourd product. Beth |
Thatch: I once made a 1/2" cottage in a Bill Lankford workshop. For the thatch, we slopped heavy spackling compound onto the wood roof (which we dampened first) and let it dry slightly. We combed the compound with a large-tined comb, pulling on it so that it curved out raggedly over, then slightly under the eaves and humped up over the windows and doorway. For color we used different splotches of yellow-gold-brown-gray, then drizzled a dirty-water wash over it all. Worked great, and the cottage looks like Snow White should walk out the door any minute. Wanna |
For a great looking cement side walk - use spackle (light weight)- you can add some gray paint to color it if you want or add this later. Spread an even layer on your planned area. Take a 1/4" wide piece of wood and press it lightly every so many inches to provide your separately "poured" cement sections. Then take your exacto and draw a line in the middle of that. You can make wonderful cracks in corners- add initials - what ever you would like. To darken the sidewalk (but be very careful about this) you can use a dirty water wash on it. Remember though it is impossible to make it light again! (which is why I opt to color the spackle in the beginning!). Renee |
Room box exteriors: My specialty is in decorative painting so I usually finish the outside of my boxes in marble or other faux finishes that co-ordinate with the box. You can also make it more thematic by Mod-Podging pages from a book - if it is a library or book theme. Frankly it is easier to finish the box when it is still in pieces. I use A LOT of white Krylon spray primer - sanding in between coats- to seal up the grain and get a smooth finish- then the world is only limited to your imagination. I have one friend who cover a jewelry shop with crushed safety glass from an auto shop! (a little touchy to handle- but pretty safe just the same). Renee |
Thatched roof: I made a 1/4" thatched roof cottage and we used raw flax. We combed it then cut small pieces to place on the roof. Took a long time in 1/4". But the effects are marvellous. Be sure to keep your hands free of glue when you use flax cause it will stick to your fingers and then you've got a mess. After the roof was dry, I took a toothbrush and 'combed' the roof to remove the excess flax. Terri Young |
| Previous 10 | Next 10 Page 657 of 1032. Total links in database: 10312. |
|
Browse the database (all entries) |