Plaster or stucco ceilings, I use a product called "Skid-Tex" that is sold at Home Depot and Lowe's for getting a non-skid surface on steps, etc. It's a granular stuff that you mix with your paint as thick as you want it. Just brush or pat on with a brush, depending on the look you want. The thing I like about this is that is doesn't flake off and it hides tapewire beautifully.

Carole Pierce


Stucco: I've always used dried (used) coffee grounds. I just slather Elmer's on the surface, pour on the grounds, let it dry, dump off the excess, then paint it what ever color I want.

Leslie Hoag


Molding for ceilings. I have had success with paper doilies that are available in gift shops, dollar stores, etc. I pasted one to the ceiling in my dining room and then painted over and voila! a design in the ceiling that looked like it had been molded from plaster. I would assume you could cut these doilies up and use in the corners of ceilings and walls and also as a design around the outside of the ceiling too.

Donna


Marble Tiles: I went to Michael's framing dept. and looked through their mat board scrap pile. I found two pieces of picture mat board that were a parchment pattern, cut 3/4" squares of both of them, and arranged them in a checkerboard pattern. It looks really great with three coats of acrylic varnish.

Chris in Minnesota


Floor Tile Patterns: There is a neat web site: http://www.ipns.com/lajoie/minitiles/tilegrid.htm that allows you to create a design in tiles. Possibilities are endless and gives you something to do in your "spare" time.

Anita Myers, Maryland


Floor Tile Patterns: For tile samples go to
http://www.tile-heaven.co.uk/">http://www.tile-heaven.co.uk/ http://www.vargastile.com/tile/mexican/talavera.htm">
http://www.vargastile.com/tile/mexican/talavera.htm http://www.specsimple.com/Rooms/SURFACES/wallcoverings/ceramicwalltiles.html">
http://www.specsimple.com/Rooms/SURFACES/wallcoverings/ceramicwalltiles.html
http://www.designsintile.com/ackit.html
http://sd.znet.com/~dgrass19/links.html">
http://sd.znet.com/~dgrass19/links.html

Dorothee, Katikati


144th Shingles: I took a Nel Corkin class at the 1995 NAME National and she introduced us to a wonderful solution for shingles that will work for 144th scale. You can buy rolls of paper shingles from a railroad hobby shop. They are #800 Profile Shingles (HO scale), made by Campbell Scale Models, P. O. Box 5307, Durango, CO 81301. They cost about $6 back then, and the package says it will cover approx. 9" x 12", which is a lot of little roofs! To apply, cut rows of shingles first, paint with diluted raw umber (or any other dark brown), attach with glue (they come already gummed, but glue works better) and let dry completely. To simulate weathering, add streaks of white and rust colored watercolor pencils. I imagine dry brushing would work, too. When dry, pry up some of the shingles here and there so they don't look too perfect.

Marilyn - Wisconsin


Mitering: Here's a trick I learned in a Brooke Tucker class.  Mark the back of the moulding with a pencil.  If it is floor trim, then draw a continuous line on the side of the wood that will go onto the floor, and then ALWAYS put that floor line of the wood onto the floor of the miter box, or the "floor" of your hand held miter cutter.  If it is ceiling trim, then the pencil line would go onto the part of the wood that will go against the ceiling, then put that wood into the miter box with the line on the floor of the box.  I hope I have made sense, it is very simple and you will not have any mistakes if you follow this rule.  Of course, it helps to mark the direction of the angle in pencil, too, and use a VERY sharp pencil to make marks, a sloppy mark or a wide mark will leave the measurement inaccurate.  Practice with some scrap wood, and practice with the angles.

Patty Adamson in Bandera TX


Mitering: Cornice moldings: For cutting an inside corner for ceiling cornice or baseboard, stand the molding in the miter box with the part that will be glued to the wall against the back of the box. Slide the molding in from the left, past the middle slot and cut it at the right side guide for the right hand end of the strip.  For the other end, slide the piece in from the right past the middle to the left side guide slot.

      An easy way to remember is for an outside corner approach the guide slot from the outside edge of the box and for an inside corner approach the guide slot from inside the box.

Rose from Somerville, MA


<<< Cardstock: Can I also use  the Yes glue to glue the cardstock to the wall?  It won't corrode or harm The  copper wire that's there?  I heard that moisture will corrode it, and Yes glue  is water-soluble. does that make a difference? >>>

Yes paste is the correct glue to use.  Rather than moisture harming the wire, the major problem is fungicides that are used in some commercial wallpaper pastes to prevent mildew.  Some of them react with the wire making copper oxide which is black and may show as dark blotches through the wallpaper.  Doesn't really seem to have any effect on the wiring, but doesn't look good.

Tom


Previous 10 | Next 10


Page 660 of 1032.

Total links in database: 10312.



Search for:


Browse the database (all entries)