Well, I haven't actually tried this myself, so I can't swear that it will work, but I was told that vinegar will work as a solvent on wood glue. Can you try it on a small, inconspicuous spot? If you do, let us know if it really works. Tere Perry |
Siding removal: If there aren't huge globs of glue to be removed, try dental floss. Floss up and down behind the siding, just like it's your teeth! LOL. If that doesn't remove the "plaque and other nasty build up" try a thin file or saw blade. Just go slow and easy! Xacto knives don't work well, as the blades tend to snap. Paula Isaacs |
Siding: I have loosened and unglued things that were originally glued with white glue using rubbing alcohol. I have never tried anything as large as siding or anything that was glued with wood glue, but I would try it as a last ditch effort if nothing else is working. Sounds better than sanding to me. Use a mono-jet glue gun and really soak and see if it starts to jiggle. Really soak it. It should not hurt the wood as the alcohol will evaporate quickly and try several times before you give up. Do your trial in an inconspicuous spot of course. Sandy |
Removing Old Siding: Try warm water and vinegar, mixed. Let it set. Depending on the glue, it might soften enough to use a putty knife and scrape it off. SA Burr |
Cutting Dormer Openings: A circular saw would be easiest, a Dremel or Micromark one. After much measuring to determine where to set it, I would set the roof down on a Dremel 4" table saw (for example) and cut it out. The tower will have to be kept out of the way, there might have to be some fancy jigging involved. Another way would be to use a Gyros saw blade in a Dremel rotary tool to cut it roughly and then finish it off with a power sander of some sort, or even files. Barb Jones |
Cutting Dormer Openings: I don't know if it would work but I would mark each corner of where the dormer will go, drill a hole in each corner, then use a hand-held keyhole saw and cut them by hand. Juanita Sellers |
Wallpapering Around Fixtures: Find the cheapest index cards you can, and use them to make a template for each wall. Cut the cards into smaller pieces where necessary to fit around moldings, lights, etc., and tape together with masking tape until you have covered the whole wall. Then you can trace around it, including any openings or uneven edges and cut out. Leave 1/4" overlaps for the edges that will meet at corners. This way you can still paper in sheets instead of cutting strips. Since I buy scratch & dent houses at yard sales and flea markets to rehab and give away, they often have obstacles to paper around, and this method works well. Only trick to it is remembering to cut with the pattern in the same direction on each wall! Loretta Sniarowski |
Composition Leaf: The composition leaf comes in little tablets in copper, gold, etc. but flies all over the place when you try to pick it up. Cut a sheet of waxed paper about an inch or so larger than the leaf. Place it on the leaf before you remove from the tablet and rub. The leaf will stick to the waxed paper and not break up into little pieces and fly away. Then place on the object you are leafing (leafing to glued surface), rub the waxed paper again and the leafing will stick to the object but the waxed paper won't. Then burnish leafing with cheesecloth or stiff bristled brush. To patina copper composition leafing, spread salt on surface (unevenly) and then pour apple cider vinegar over it. Let dry. To patina gold composition leaf, splatter with bleach or bunch up a piece of cheesecloth soaked with bleach and dab on randomly. Let dry. Mary Kay Gentile in Ft. Myers, FL |
I had good luck "refinishing" a bad looking stained and sealed bookcase by using shoe polish (the wax type that comes in a round flat tin). I applied the polish with a cloth and a small toothbrush for the hard-to-reach places, let it dry, and buffed it. It really saved the piece. I have since used the polish on raw wood and been happy with the results. Gail in Richville, NY |
STAIN FIX: You might have some success with Homer Formby's Furniture Refinishing products. I re-did most of my window sills in my 'real' house with it....it was messy, but it did remove all the nasty, cheap builder's quality varnish and most of the stain. It does take awhile to do 'right' but I was very pleased with the results. OKCMinis |
| Previous 10 | Next 10 Page 662 of 1032. Total links in database: 10312. |
|
Browse the database (all entries) |