STAIN FIX: You stain can "go bad" when exposed to air - the ingredients will separate. Sometimes a good stirring will make it usable again but after a while it's no use. To save your table you could try staining over it with a darker color, or try using gel stain, which sits on top of the wood rather than penetrating. Be sure to stir well before using.

Beth, In A Miniature Manor


Dormers: I had to put a dormer in a house similar to yours and it's tricky but not impossible. I did not put the bottom of the dormer right at the floor level, but up a bit. You'd need to hold the dormer against the roof to see where you need to put it. Use the cutting template that comes with it and drill a starter hole slightly inside each corner. You can then use the saber saw to cut around.

I always make knee walls from foam core in any attic, as it is more realistic and makes arranging furniture much easier. Once you get your dormer situated, you can build a wall to come down smoothly from the inside of the dormer to the floor.

Dani Rice


Shoe Polish as Stain: Gail, you said you used shoe polish on your furniture. I have used it to stain floor boards in two different houses - one open in the back, and one that closes British-style - and it does give a gorgeous glow to the floors. But - in both instances, the polish fades and has to be redone. Of course, I can't get up as close to the edges the second time around, so it doesn't look nearly as nice. Have you had this problem? Is there a way to seal it?

Dani Rice


Wide (and narrow) Craft Stick Floor Tips: I have used craft sticks for flooring on small projects where you won't see much of the floor even though I have had great success working with them. My tips are:

1. Select the best ones only(save the discards for other uses)...no warped ones or weird grains

2. Glue carefully so as not to get glue on surface if staining, or wipe with a damp cloth to remove excess glue.

3. After gluing, clamp and weight the floor overnight to dry completely (most important step)

4. Sand very well, paint or stain and weight again til dry!

5. Cover with water-based clear gloss or matte topcoat for a beautiful finish and really nice floor.

Roz Weitzman


Several years ago I wanted to finish off my old farmhouse's front porch with slightly warped floorboards.

Aged Porch Floor: I couldn't find anything to suit me,..... by accident I discovered wooden coffee stirring sticks in our local Smart and Final. They come in a box of one thousand. Looking at them I thought they looked too small ( "5/16th by 6"). But I started laying them down in a random pattern (took almost two weeks), and they gave me exactly the look I wanted. When I finished laying them down, I bug juiced the floor, painted it with a dry brush of thinned water base paint (2 coats) and then sanded it lightly, then took an old nearly empty fine point marker ( no good for writing down phone numbers...smile), dabbed on "nails" after lightly dampening the ends of the floorboards with a cotton swab, and got a very realistic worn, warped, old look. I don't see why you couldn't use these same coffee stirrers to create a polished hardwood floor effect. In that case I would lay the floor out on sealed stock cut to the pattern of the room, sand it thoroughly, stain and finish it and lay it in. My grandmothers old hardwood floors were of very narrow oak strips, and I think the stirrers came closest to matching in "scale".

Carol Wagner


Dormer: The best tool and method for adding dormers to a dollhouse shell is whatever one works for you. I sometimes use a jigsaw, a hand-saw, or a rotozip. Usually depends on which I can find first.

Tom Berkner


Wood Floors: I made wood floors using the wood that was already there.. I marked my lines with a heavy pencil line, then went back over them with an awl. If you want nail holes for joining planks, just punch with a nail set and there you have it. Stain the color you like for floors and varnish. The only drawback is that you can't run electric tape over them, unless you plan to hide with rugs or carpet.

Lisa Lynn


Wood Flooring: I have made my own flooring for several years and I think with great success for almost any environment (don't ask for photos). I glue a 1/16" piece of basswood (generally about 3" wide) to a piece of regular paper or even to plywood. I then stain it and depending on the width of the planks I want, score it with a pencil, ballpoint pen, whatever. I then re-stain, sand, even pound with a small hammer for a distressed look. On the first set of planks I made, I drilled smaller holes and inserted toothpicks but eventually discovered that an equally realistic appearance could be effected by just poking holes and staining again-saved a lot of sanding. This works especially well for parquet flooring - just make the planks narrower and then cut into squares.

Kathy Watkins


Free Siding: Lamp bulb cartons/holders when turned inside out are GREAT for smaller scale siding. They accept paint and stain well.

Kathy Watkins


Tung Oil - Be careful about adding pigments to tung oil. Pure tung oil has a reputation of not curing if too thick! Do a test before using any tung oil you modify. Tung oil varnish is OK because it has dryers in it.

Minwax oil stains - are combination of oil dye and pigment. The pigment is solid particles of color. With evaporation the pigments become too concentrated and can act chunky. Adding mineral spirits to try to thin old stain doesn't work well either. Get new stain. I seldom use this type of product as is on miniatures because the pigments are hard to control in scale work.

Oil Stain - If you let a new can of oil stain sit, you can decant the dye liquid off the top leaving the solid pigments. Using the oil dye liquid works well as a stain in some situations.

Test Everything - on a scrap of wood first, (or the underside, if it's a kit. Refinishing in miniature is not one of my favorite pursuits. My personal favorite for stain is a water stain. I find that an oil based stain is likely to accentuate the grain, which does not always translate well into small scale.)

Pete


Previous 10 | Next 10


Page 663 of 1032.

Total links in database: 10312.



Search for:


Browse the database (all entries)