While Recuperating in Bed: I know that there are special kind of spectacles (glasses) available that have a prisma + mirror to allow you to read a book that is flat on your stomach while you are lying flat on your back. If you could get hold of those.... you might be able to do SOME mini work, using a tray on your stomach to have some kind of work-area. You would need sufficient strength in your arms and hands though to work in that position! You could try to elevate your elbows slightly with some cushions on either side of your body. Cutting things out and gluing them should be possible that way... Holding parts together with paperclips for instance. Could you have someone interested in miniatures keep you company so both of you could work on a project while you lie down? That would offer some assistance in case you need help... Else |
To Store Tiny Things; Take empty 35 mm film containers. The ones with the clamp on top. Cut a nice size opening in the top. Put some clear plastic over the open container and then place the lid with the hole back on. You now have a secure "see thru" top on a container. No glass to break when it falls to the floor. Dani |
Lite Brite peg bottles and jars. Cut the pointed end off flush. If there is anything left sticking out, sand it off until you have the end flat. For jam/jelly jars, dip this flat end into some gold acrylic paint that you have puddled slightly onto a piece of aluminum foil. Dip it in gently and evenly and twirl so that the paint comes up the side level all the way around. Using tweezers or pliers turn the jar over very carefully and set upright onto a piece of card to which you have applied double stick tape. Let this dry very well. For labels, use the canning labels found on "Jim's Dollhouse Pages" website in the printable minis section. When these are printed onto self stick Avery Address labels or some such they work great. Also, if you leave the Lite Brite peg with the pointed end on: paint this pointed tip gold or silver, let dry well, add a fancy gold label punched from gold letter seals, then glue lace and/or ribbon around the "neck" of your bubble bath bottle. Gail from Georgia |
Crackling Products. I read just this week in a "real size" woodworking book that good old mucilage (the amber coloured liquid glue with the rubber slanted tip on the end that we used in schools some years back), works like the commercially prepared crackling products. I haven't tried it myself, but I suspect it might be cheaper than other products, and might be easier for some folks to locate. You just substitute it and use it the same as you would the crackle stuff. Cheryl L. |
Try gluing upholstery cording to your arches, applying a few coats of gesso, and then faux painting it all stone color. Cording comes in braids like tiny ropes and also "rat-tail" which is smooth and satiny. Using both types would create interesting textures. Loretta Sniarowski |
Non-working ceiling fan is easy. You need one round plastic canvas coaster (square won't work due to different mesh pattern), one dish detergent bottle cap, a couple of popsicle sticks or 4 wooden spoons (don't remember which brand of individual apple sauce packs includes them), tacky glue and paint. Pull the small knobby part off the spindle of the bottle cap and scrub out any detergent residue. Cut the popsicle sticks in half, or trim down the wooden spoons to paddle shapes and paint desired color. Lay the wood parts on the plastic canvas and trace around them, leaving a plastic canvas ring at the center, and trim the plastic canvas arms to about 1/2" long. Shape should be sort of like a Celtic cross, or gunsight. Cut a small hole in the middle of the plastic canvas to fit over the bottle cap spindle. Paint the bottle cap pieces and canvas desired color. Glue wood blades to plastic canvas cross. When dry, thread canvas and wood part onto cap spindle, wood side away from cap. Pop small part back onto spindle. Voila, a ceiling fan to glue to your ceiling with or without a plastic doily ceiling rose. Can also glue a big white bead globe lamp to the small part of the cap. Looks nice with plastic painted gold or silver and wood-finish blades, or all one color. If you don't have a coaster, you can also improvise with a small curtain ring and/or jewelry bits. Loretta Sniarowski |
Hanging Pictures: I want to warn people about using minihold wax for holding pictures on walls. The wax will stain the wallpaper after a period of time. Our museum received 57 roomboxes in a collection where the miniaturist put windows and doorframes in, even baseboards in with the wax. All furniture was waxed in as well as just about everything else. She never glued anything in place. The wax has "bled" into the wallpaper and stained it terribly. I, myself, glue the stuff to the walls -- after all, when I decide where I want it, I figure it isn't coming down anyway. I tried using the moveable (earthquake) glue and it tore the wallpaper when I decided to remove the picture -- so I went ahead and glued it down. My dollhouse rotates on a turntable so things have to be firmly attached or they fall all over the place. Just my own preference. I did use the moveable glue on the furniture pieces because it really can't ruin the floors -- it will sometimes stick to the floor, but you can peel it right off. I HATE the waxy residue the minihold wax leaves on everything. Fay in St. Louis |
Ceiling Fan: One of the first minis I ever made all on my own was a ceiling fan. I used 2 small wood beads and a wooden disk, paddle wire, short piece of coat hanger weight wire and card stock from my calling cards. It helps to look at a real one to measure and scale down the blades. The 4 blades are made from a sandwich of two blades cut from the calling cards. Shape the outer edge either in an oval or scallop. The inner edge is straight. Glue a wire (paddle wire gauge) down center (in between sandwich), extending out the end that will glue under light bulb. Paint blades wood color. Can decorate with gold paint in a scroll pattern around edge. Paint wire gold. Light Bulb:3/8 inch wooden bead (with or without hole it doesn't matter.) On a power sander, sand a flat side (over hole on one side) (the flat circle should measure approximately 1/8 inch diameter. Paint ball. I used Folk Art Wicker White and then painted Folkart White Pearlized paint as last coat. The pearlized paint makes it look like glass bulb. Bulb Base: Find or cut a wood circle. A thin slice can be cut from a 1/2 inch dowel. Cut or sand the second bead in half, possibly a little less than half. (This is the mounting base of the fan fixture that glues to the ceiling.) Drill a small hole in center of wooden disk diameter of coat hanger and in your beads if they did not have a hole. Stain or paint these pieces in a wood finish. Decide what length coat hanger piece should be. It needs to go through half bead, about 1/16 to 1/8 inch showing between disk and half bead, through disk part way through hole in bulb bead. Paint section of coat hanger that will show between base and disk gold. Assemble: Glue blade wires evenly spaced on flat side of disk. Glue white bulb over this. Let dry. Glue coat hanger wire into disk and half bead with gold section showing between. Let dry. Look at your full size ceiling fan and bend your blades at an angle like the full size fan. Glue whole fixture to ceiling. Mary Ann Ferris |
Hanging Pictures: I use good quality double sided carpet tape to attach mini photos, wreaths to the walls in my dollhouse. So far so good. Don't know how easily it would come off of old wallpaper as my Oakmont is still only a few year new/old. Wilma Kinder |
Hanging Pictures: I always use the stuff called "Dap Fun-Tak" to stick my pictures on the wall. It's a reusable blue gummy stuff. I've been using it for years and so far it hasn't marked the wallpaper. It is easy to remove if you decide to move your pictures. I put a small ball of the "Fun-Tak" on the 4 corners of the picture and it holds fine. I don't like the wax stuff as it is terrible to remove and it doesn't hold if the temperature is warm. I also use the "Fun-Tak" to hold all my mini accessories in place in my rooms. It hasn't marked the surfaces. Paula Foerder |
| Previous 10 | Next 10 Page 670 of 1032. Total links in database: 10312. |
|
Browse the database (all entries) |