Egg info: Take a look at this site for egg artists, egg art supplies, instructions and publications focusing on egg art.

http://miniatures.about.com/cs/eggart/index.htm

Joanne in South Jersey


Fabric as Wallpaper: I did one wall of the Percussion studio box room with fabric as I was trying to get the coarse grass cloth type effect. I used tacky glue, spread it thin on the wall and pulled and stretched the fabric until it was straight and tight, then smoothed it out and let it dry well. Then I just used a sharp x-acto to trim where necessary. If you were to use thin fabric you might have to experiment a bit with glues to find one that wouldn't bleed through or discolor the fabric. Tacky or Yes glue would probably work if put on thin and smooth enough.

Bonnie Gibson in Tucson


Cutting Glass: The "cracking off" method already mentioned( forgot who) is a very good way. Takes a little practice, but you can get a clean break off. Just make sure to scratch your mark, heat it just long enough and then you can touch it to a dampened cloth. Should crack off right around the glass, starting from your scratch mark. Try not to have to go over the scratching part as you might not scratch on the same mark and that could result in a jagged edge when "cracked off."

Joanne in South Jersey


Fabric as Wallpaper: I use a product called "Wonder Under" (made by Pellon) to attach fabric to cardboard, wood and foam core. Its an iron on product, like interfacing, that you can get at any fabric/craft store. It has a double adhesive. You iron one side of it to the fabric and then peel back the paper on the other side to iron it to the cardboard. To cover a wall you can cut a piece of card to fit your wall, iron it to the piece of card and then glue the card to the wall. Or, if you don't want to have the wall be permanent just use double faced tape to secure it. Its great because it is a nice, smooth finish. You don't get any of the discoloration or bubbles that some glues leave. I used it to attach the fabric on the out side of my Southwestern corner box. It is constructed out of gatorboard.

Leslie, in Buffalo


Acorn caps: Freeze them before putting in with miniatures as some tiny critters may decide they like minis better than acorns to munch.

Method: Place items in Ziploc bag into freezer for a couple days. To test: place items on a sheet of paper with a clear jar upside down on top of it. If after another day there are no tiny dustlike items on the paper, you are probably clear. To be sure, take the items outside and spray with sealer.


Finishing Staircase: I've used a stainable wood filler, my favorite is Master Wood Filler by Behlen. It cleans up with soap & water. I've used it in both mini and 'people-sized' wood working projects. The other part of making the staircase look good is sand, sand, sand and sand again, ending with the finest grade paper that you can find. Then use a 'tack-cloth' to remove the dust. I HATE sanding, but it seems to be essential in any woodworking project. A sanding block helps a lot, but my hand still cramps! When mixing stain and paint in the same mini project, I've found that staining and painting, then assembling seems to go best for me. I hope that this is of some help to you.

Patty in CA


OrnaMagic: I wonder if anyone on the digest has seen this year's newest Christmas line of ornaments called "OrnaMagic." You can see them on this website:

http://www.willitts.com/OrnaMagic/index.htm

In particular, there is one that has a "working" fireplace with a fire going inside. I have only seen these on the website, but have been pondering if the ornament could be adapted to mini use some how. Apparently the "fire" is a series of 24 photo frames run by a single light from a string of Christmas lights.

Anita Myers, Arnold, MD


Egg Nog:

Materials:

Polymer Compound Resin (2-part kit such as Envirotex-lite)

White Opaque Color

Yellow Transparent Dye

Ground Cinnamon (I know it should be nutmeg, but this is more to scale)

Paper Cup, Toothpicks, Stirring Sticks

Miniature Pitcher & Mugs or Glasses

OR Chrysnbon Punch Bowl Set (for Egg Nog Punch)

Pour appropriate amount of polymer compound - 1 part resin to 1 part catalyst into a paper cup. Add a touch of white opaque color and a touch of yellow transparent dye. Stir thoroughly. Carefully pour mixture into pitcher, glasses or mugs, OR ..into Punch Bowl and cups. Sprinkle with ground "nutmeg". Allow to harden undisturbed at least 12 hours.

Mary Eccher


Wonderful miniature kits for young children: Just wanted to share a real "find" with all of you. I have been looking for a way to really share my love of miniatures with my five year old daughter but most kits are very delicate and difficult for her to attempt without a lot of frustration. Then, today at Marshall's I found a wonderful dollhouse kit and coordinating furniture set kits by a company called Shure Products.

http://www.shureproducts.com

They have an absolutely beautiful (albeit juvenile) dollhouse made of laminated wood. Each kit comes with all of the materials to make mini foods, books, beaded lamps, a door mat...lots of fun mini projects designed especially for the 5-7 year old. I am so excited about her reaction to this present on Christmas morning. I'm even more excited about this chance to share a wonderful hobby with my little girl. If you do look for this dollhouse, you have to search the toy stores they list on their site for Smart Family dollhouse...or you could be lucky like me and find it for a great price in the toy section at Marshalls. I know I sound like a toy rep...it is just that I am so thrilled with this fun kit! My "real" dollhouse will have to be put on hold while I play with my daughter.

Paige


Holeless Beads: I have used the miniature marbles from Michael's (holeless beads) to decorate Christmas Trees, Swags and Wreaths. I love them.

Fannye in TX


Previous 10 | Next 10


Page 677 of 1032.

Total links in database: 10312.



Search for:


Browse the database (all entries)