Lycopodium Trees: I learned how to make a Lycopodium Tree - must be 15 to 18 years ago from Joe Hermes. The Kit consists of a "Bottle brush tree" which in Canada you can get for about $2.00 to $4.00. and a Bunch of Lycopodium. You break off pieces of 'branches' to about 1/4 to 1/2 inch longer than the width of the tree at the point you are going to glue them in. So you make little stacks of different lengths to start out , then start gluing them into the Bottle brush tree, starting at the bottom, using tacky glue which will dry clear. After you have filled in the tree then let it dry and go back and fill in any gaps you cant live with. NOW THE IMPORTANT INFO IS THE PRUNING TO SHAPE. YOU MUST N O T CUT THE BRANCHES OFF. YOU MUST PINCH/PULL THE EXCESS OFF TO SHAPE THE TREE. IF YOU CUT THE BITS OFF YOU WILL END UP WITH UGLY BROWN ENDS ON YOUR BRANCHES. Paddy |
Snowmen: Thought I would share an idea with you that I found at the last NAME National. 1" tall snowmen Safety tip Q-tips Cut the cotton tip from the Q-tip and glue to the round cardboard circle. Using the fine pens make black dots for the eyes on the top part of the Q-tip and down the center of the bottom part for buttons. Red dots will make a nice smile beneath the eyes. Cut embroidery thread - - your color choice - about 1" long to glue around the neck. Cut tiny (1/4") twigs for the arms and glue to the top of the bottom portion of the cotton. I also put tiny snowballs at the base. These were from the stuffing from a bean bag chair. Styrofoam balls. You could also make them from Fimo. I thought the idea very cute. Took me a while to find these Q-tips but most drug stores now have them. Carol (jody) |
Snow: I, too, like white silicone tub caulk for snow on my projects. I like that you can swirl and shape it, make snow drifts and even pull down icicles off the edge of the roof. I've done it only on smaller projects, though, and not a large l" scale roof. You'd have to work real fast on a big area as it skins over in about five minutes and will look lumpy if worked any more. I have learned the hard way not to use a cheap off-brand, as it will yellow in time. I use Dow Corning only and always have good luck with it. My tip is to use white powder on top to give it a real snow look instead of glitter. I use either talcum powder, baby powder, anything that is nice and white (some are a bit gray). The "snow" looks real velvety. You need to sprinkle it on liberally while the caulk is still wet, let dry, then blow off the excess. Marilyn - Wisconsin |
Garlands Wreaths: I made some garlands and wreaths for a recent HBS project and it was really easy. I got these instructions from the "Craft Designs" book by Rebecca Zimpher (available from HBS) which has patterns for the shapes. I made my own patterns and used starched felt instead of green construction paper. First, cut the shapes out of starched green felt. Then, cut up lycopodium into tiny 1/4" pieces. Lycopodium is a dried plant that looks like mini douglas fir. It's available from HBS, of course, but you can also get it from Michael's, JoAnn's and similar craft stores. Coat small sections of the felt with white glue. Using tweezers, stick pieces of the lycopodium into the glue laying them up, down and straight out in the way pieces of fir would be on a garland or wreath. Continue in sections until you've covered the piece, then let dry. Adore with red satin bows or whatever and put in position with MiniHold. The book has instructions for making Christmas trees out of lycopodium, too. Sally Cook-Thomas |
Garlands: look at displays at your local craft or gift stores that carry the little Christmas village displays at this time of year. I've been able to purchase small accessories (which usually turn out to be l/2" scale), including a small roll of garland that was quite nice and would do for l" scale also. Marilyn - Wisconsin |
Christmas Tree Decorations: One of my favorite mini Christmas tree decorations is a miniature chain that I made one year out of the foil wrappers you get off holiday Hershey kisses in the red , green, and silver colors. It took a while to develop a technique that would hold together, but finally found one that worked. Here are the instructions for those of you that would like to try it. Collect the wrappers off holiday Hershey kisses. Encourage your family to overindulge, and bribe them to unwrap very carefully so you have complete untorn pieces. You'll need eight to ten lengths of that very thin floral wire which has paper coating. (I tried it without the coating, and had a hard time getting the foil to stick to the wire). Cut the foil squares into 1/4" strips. You need to run a VERY slight amount of glue on the floral wire, and start wrapping the strips of lengthwise foil down the length of the wire, keeping the thickness as thin as possible and still covering the wire. If it is a little lumpy, that is good...it gives more character to the finished result. Compress the foil tightly around the wire. Let dry....and cut the foil covered floral wire strips into 5/16" lengths. I use a pair of small needle nosed pliers that have two rounded ends, and it works best for making the chain links. Curl a length of wire around the tip end of your pliers once with just a little extended beyond the other end. You now have one link. start forming your links and proceed as if you are making a paper chain . Sorry about the detailed instructions for such a simple task. You can make the chain as long as you like. It makes a beautiful decoration for the tree or for a mantelpiece decoration. Carol Wagner, Joshua Tree, CA |
Candy Canes: When trying to make some candy canes for my Christmas scene; I used 32 gauge white floral wire, and size 10 red crochet cotton. I glue the one end of the crochet cotton to the wire, and started twisting it. So it looked like the spiral on a candy cane. I then cut the thread and glued it to the end of the wire, so it wouldn't untwist. I then used acrylic varnish to coat the cane. did this three times, letting it dry in between coats. I was really surprised how well these turned out. looked good enough to eat! I used white glue, to glue thread to wire on both ends. I had tried just thread to begin with ,but the little bend in the candy cane wouldn't stay. Pat Thompson |
Candy Canes: I made my candy canes out of white & red seed beads and head pins. I shaped the head pin into a cane, cut it to the size I wanted and then slipped the beads on it alternating colors, glued the bottom bead and that was it. Really easy!!! Marsha, Newark, CA |
CANDY CANES Why not use the striped paper clips and cut and curve. We have an old fashioned candy store in our town that puts out canes by the 10,000's. They shape them into baskets, hearts, swirls,... Lisa Lynn |
Candy Canes: Go to a hardware or Radio Shack, buy thin white wire with a red stripe. Cut into appropriate lengths and twist. Bingo!! Candy canes. Wire comes in some astonishing colors and color combinations. . . let your mind wander in delight... this stuff is cheap! Electronics stores also carry and amazing variety of colored wire. . Judie - Daytona Beach, FL |
| Previous 10 | Next 10 Page 678 of 1032. Total links in database: 10312. |
|
Browse the database (all entries) |