Christmas Presents: Last night while snacking on Andes chocolate covered mints I noticed that the Christmas ones were the perfect size for mini presents. Nice heavy foil with little Christmas prints on them.

Judy


Snow Globes: I bought a couple of those replacement bulbs that people use for their RV's turn signals (I think). They are rounded at the top and about 3/4 inches across. There are different sizes but I liked this size. Remove the bottom part. I used regular needle nosed pliers as I don't have any professional tools. I cracked a couple of bulbs in my first tries. Then sand the glass down to about a 1/16 inch lip. I used a dremel and coarse sandpaper. Take one of those black 1/4 inch neoprene stoppers (from the faucet fix-it pack), glue a small figurine to the top of the stopper and glue the glass dome over the top. I didn't fill it with water or "snow" but I suppose you could. Maybe even use tiny white crayon shavings for snow.

Annie


Stucco: An easy way to get the stucco look is to use white (or any color) acrylic paint. Start in a small area and paint heavily, about 1-1/2", then tear about a 1-1/2" piece of Kleenex (facial tissue 1 thickness)and put it on top of the paint. With dry brush, (white stiff bristle,) push it around 'till it's lumpy and looks like stucco. Work in small areas to get the look you want. Let dry 24 hours and you can antique, seal or leave alone.

Jo Nan Deltona


Christmas Ornaments: I use a lot of Christmas ornaments in my dollhouses. One dollhouse is a dollhouse shop with a home upstairs. Hallmark makes some neat ornaments that are just the right size to use as dollhouses in my shop. They also have tricycles in their Easter ornament collection that I use in my dollhouse. Hallmark also has miniature ornaments in their Christmas collection that I have used as sculpture. They have a small dome with a lighthouse in it that will go in my lighthouse dollhouse as soon as it is completed.

Deb


Stone Foundations/Fireplaces: I made a stone foundation and fireplace by spreading light grey caulk on the base and then pushing the stones into it - quite effective. If you have the caulk thick enough, you do not need to add any mortar to the joints.

Shelby


Christmas Tree Ornaments: Glass Balls: Use garlands of plastic beads fused onto string (sold as holiday garlands, or by-the-foot in some fabric accessory sections). Buy desired color, or buy silver and use permanent-ink felt-tips to color them. Clip string on one side as close as possible; leave stub on other side and paint gold or silver to suggest ornament cap. Glue globe directly to tree, or attach an inconspicuous thread loop to hang over branch.

Foil Fans: Cut sections from pleated sides of stout foil candy cups; pinch at base and flare out. Decorate as desired. Paint if you don't want foil effect. You can also use the sort that combines thinner foil with paper.

Flowers and Leaves: Try any techniques and tools you've been using to make "live" flowers to make "artificial" ones - e.g., blossom or round paper-punch to make blossoms trimmed with fine glitter, etc. Ditto for fruit and veggies.

Quickie Grape Clusters: Coat half-inch or less of bamboo skewer tip with E-600 glue; dip into mustard seeds. Shape with fingers. When dry, paint to taste; nip off excess skewer.

Fattened Sequins: Use a bit of Fun-Tac or similar stickum to hold a shaped confetti/sequin form (like a star, crescent, tree, etc.) above work surface. With needle tool, apply a coat of tacky glue. Let dry; apply additional coats to fatten form. Turn over; repeat on other side, embedding a loop of thread for hanging. Paint and trim as desired. (Possibly some of the acrylic gels or similar stuff would work for this, too.)

Mary, Oregon


Clapboard Siding: Glue the clapboard siding on first. It is much easier to do it first and then paint. I didn't get any curled or warped boards with mine doing it that way. I used both paint from the hardware store and paint from the miniature store. I used latex paint from the hardware store for the house itself because it took a lot of paint to paint it and it is much less expensive that way and just as good to use. For things that didn't need a lot of paint, I used the paint from the miniature store. I didn't want to buy a big can of paint just for small items and have a lot of paint left unless I knew I had other things I would use that paint for. I never used oil based paint for anything. The clean up is way too messy.

I would put on the amount of coats that you are satisfied with. You usually do have to sand somewhat between coats of paint. I used three coats of paint. Shutters and window trim can be painted with an acrylic paint if the siding is painted with an oil base paint. One would not effect the other when finished but the acrylic/latex paint is so much easier to work with for everything. I have never heard of spaying with a sealer of any kind once the siding is painted. The paint IMO is enough.

Carol from MA


Clapboard Siding: I apply the siding to the house first (using Quick Grab). After it is all on, I then paint. Any paint works. Some people prime the wood with sealer. I use the first coat of paint as my primer. Sand, then paint again. With some paints, I will use a third coat, but not often. And you don't have to use the same kind of paint on doors and windows as you use on the siding. I use an eggshell or anything except flat, flat paint. This makes it easier to dust the siding. I don't use a sealer afterwards, but you could.

You can cut plexiglas yourself. Buy a piece at a home improvement store (Home Depot, Lowe's,) The cutter costs about a dollar or two. With a metal yardstick as a guide, you score the plexi several times. Don't try to cut through with one cut. Just score, score, score. Do not cut all the way through. Scoot the plexi to the edge of the table, lining the score up with the edge of the table and snap it off. You can also cut plexi with a scroll or table saw, but I much prefer the plexi cutter, I get straighter cuts.

I glue a track for the plexi at the bottom of the first floor and the bottom of the third floor to slide the plexi in. You can buy these already made or make your own. Glue three pieces of wood together to form a U shape. The plexi will then slide right in. On the top floor, I glue two small pieces of scrap wood at the top (open) corners on the inside under the shingles. Let it stick out a little, so when you put a piece of plexi there, it rests between the little piece of wood and the shingle. This will place the plexi against the opening. Let this piece of plexi overlap the piece you put on that covers the first and second floors. Drill two holes (one each side) through the plexi and small wood. Drop a straight pin through to hold this piece on. It will be nearly invisible.

You can use blu-tack (rubbery stuff, different names everywhere,) to stick your furniture down. I don't like it because it is hard to hide. There are several restickable glues on the market now that let you lift the object and reglue. Rubber cement will also work.

Fannye in TX


Christmas Ornaments: I just ran across this site and thought I would share as it is adorable. Make your own Mini Christmas Ornaments Kit ($30) but you can buy it all finished for $35. Check it out. http://pb.quik.com/ikelleher/minikit.htm

Sheena


Painting Clapboard: I glued on my clapboard and then painted it. I used interior latex house paint from the hardware store on the siding and some of the trim. It covered well with just two coats. I sanded in between coats using emery boards, which are just about the same width as the clapboards so as not to round the edges of the boards. You'll need a couple of packages of the emery boards and also a brush the same width as the boards. The only disadvantage to using house paint is that they won't mix it for you in quantities less than a quart which is way more than enough to paint the house, but if it's a light color you can always use the leftover for priming inside the house. The advantage is you have lots of color choices.

Linda Roebke


Previous 10 | Next 10


Page 683 of 1032.

Total links in database: 10312.



Search for:


Browse the database (all entries)