Plastering / Sealing: I seal the wood first with dilute pva glue, let it dry, then plaster on top.

Helen Cottrell


Floor Tiles:

ECI
26162 Powell Rd.
Brooksville, FL 34602
email: ryoung@ecimin.com

They are very easy to work with and come in a wide variety of shapes, sizes and colors.

David


Plastering: I plastered my really cheap tab assembled dollhouse with real acrylic latex texture paint...you know like they use on your walls in the "big" house :0) It worked great, covered those unsightly tabs, AND gave the house more strength...with no primer preparation!! On the outside, it looks just like stucco!! 10 years later, no cracks. Unfortunately, I chose to paint it a pepto-bismol pink which needs to be redone now :0)

Nada


Spackle (plaster): When I use spackle I don't put anything on the wood first, it needs something to adhere to, for it to hold. Just think of how is it is used in "real life." Plasterers put it over blue board or dry wall, this has a paper covering and they don't put anything over it to seal it first, except what they call a thin coat - which is a thin coat of plaster.

I've been doing it this way for over twenty years and so far no one has complained. When I have used it with MDF board, which is shiny and has a finish, it sometimes will pop off, individual stones and then I just use white glue to put it back on with.

April Gill


Ceramic Tiles: Handley House handles those small tiles in many colors. Ask any mini store as they can get them for you.

Dottie


Log Cabin 'grout' (chinks) between logs: First, after all the 'logs' were installed and the glue was completely set, I stained them and let them dry completely.

I bought a small tub of spackling paste (drywall gook to fill in holes, etc). I thinned it with a little water so that it would flow thru the fine pointed tip of a plastic glue/fabric paint bottle. It needs to be thin enough to flow, but still 'goopy' enough to stay in place on the walls.

I took my bottle, and ran a bead of my 'chink' between each log, wiping the excess off with a soft, damp rag. After I was all done, I let it dry completely, went back and filled in any little air bubble holes that appeared, and let dry again. Then, I sealed the entire thing with Min-Wax brand, clear, satin finish varnish. I used Min-Wax stains on this entire house; different colors for logs, windows, door and shingles.

When you are ready to furnish your cabin, Lucy Iducovitch makes wonderful Hudson Bay blankets (4 pointers, no less!) - a must for a log cabin, I think!

Laura in OKC


Chinking Logs: To Chink the walls... this is the "mud" or what ever between the logs to keep out the cold.... I used the dry spackle added to paint and applied it with a glue syringe. Kind of a mess but it worked. Perhaps using the already prepared stuff and just applying it with a finger might be easier.

Dorothy


Gypsy caravan: Try Midwest Carriage for plans and parts; their catalog is $10.00, their address is: PO box 24, Mentor, OH, 44061-0024. They have a lot of other plans and kits, too, btw; you will find peddler's wagons, and carriages, and a host of other things.

Karen


Chinking: I am working on the RGT Adirondack Log Cabin now. The outside is all finished. I stained all the logs before gluing to the shell and chinked them with caulk. I just filled a monoject with the caulk and it was very easy to fill in the little lines this way. It wasn't nearly as messy a job as I thought it would be. I think that using the monoject helped to keep the lines in scale. I also made a corner stone fireplace by building the fireplace with 1/4" wood, then gluing the rocks on and filling in the spaces with caulk. I put little stone shelves on it, too. I added a stone foundation to the Adirondack using this same method. I really like the way it turned out and have gotten many compliments on it. If you would like pictures or have any questions, please feel free to contact me.

Carole Pierce


Formica Counter: For a Marble top for my Ice Cream parlor I used Foam Core. (You can use wood.) Painted it black using a cloth - just dabbing the paint on . Then I put Green where any white showed and then royal blue. Then I took a string and dragged it through Ivory paint for the veins. Very realistic after a good coat of gloss spray.

Gail Spector


Previous 10 | Next 10


Page 686 of 1032.

Total links in database: 10312.



Search for:


Browse the database (all entries)