Roombox Exteriors: I've completed many roomboxes, and finish the outside almost exclusively with sewing fabric applied with Tacky Glue. It gives a neater, more durable finish and is less likely to be spoiled by handling than if you wallpaper it. You can also apply sewing trims around the "window" portion of the box -- possibilities are endless. For a while, I was able to find a brick print on fabric which was in 1/12 scale. Quilting fabric stores and JoAnn's are great sources. Let your imagination run wild. Anita Myers |
Wood floors: You can cut the wood strips for your floor from 3/8", 1/2", 5/8". I prefer and always use 3/8" in one-inch scale. I lightly sand the top edges of the strip, and glue with wood glue. Everyone has their favorite so you'll get lots of choices, I'm sure. I don't stain and varnish until the floors are dried overnight. Sand, stain, varnish, steel wool, varnish. And then I hand rub the floors with brown paper bag scraps. You can also wax it, but I don't. Fannye |
Roombox Exterior: Cover the outside of the box in spackling and let it dry. Then with a pencil, draw on windows/door steps etc to make it look like the outside of a house. You can even take the side of a fan brush and dab dark green and lighter green around the bottom to look like tall grasses. For shrubs, take a scruffy old paintbrush and on an angle, stipple in some taller and shorter brush strokes for shrubs (practice all of this on a piece of cardboard first). With two colors of paint, you can double load your brush, do this by putting paint into a paper plate and letting the edge of the brush glide through the paint, then turn the brush over and do the same thing to the other side of the brush. When you paint with it, it's two shades of colors. You can trace windows that are 1" scale onto tracing paper, then use graphite paper to transfer the work. Also I think that cutting little bits of sand paper and overlapping them, make great shingles for a roof (especially gray sandpaper). For the front of the box, take a piano hinge and attach a front made of plywood and your box is enclosed. Susan |
Floor Planks: I've used the wooden coffee stir sticks (they are narrower than popsicle sticks) for floor planks. I glue them to the floor (I do this BEFORE the house is assembled so I'll not have to work inside "rooms".) I glue only a few rows at a time and then put books, cans or anything heavy, on top of the glued boards to keep them from warping. I make sure to stagger them so that the "cut end" of the stir stick isn't always in the same place (kind of like you lay bricks making sure they are staggered rather than one on top of another).... After they are all glued down and the glue has dried, I sand them because they are not always the same thickness. I like them as planks because the different colors and grains of the stir sticks makes a very interesting floor, and the "scale effect" is perfect. After sanding you can stain and varnish... or just varnish. Most coffee stir sticks have straight-edge ends, but if they are rounded, you can cut them straight across with scissors. After laying the floors and assembling the rooms, make sure that the doors will still open. Since the wooden planks raised the floor somewhat, you may need to shave away a bit of the bottom of the door. Viola Williams |
Possible Kitchen Faucet: Chris Kauhi wrote: Does anybody know of a way to make a kitchen sink faucet? I don't need anything elaborate, just one of the older type looking faucets that curves out over the sink? It just seems to me there should be some kind of screw or gizmo in a hardware store that would simulate a faucet; but I haven't been able to see it yet. Chris....try the "Fishing" section at any Wal-Mart! There are some really nice " ;curves"in fish-hooks...in may different sizes and thicknesses! These can be cut (carefully) with wire-cutters to make many things! There is even a "three-hook" fishing hook that can be the basis for a really nice chandelier. Just go there and take your time, looking with a "mini-eye"...and soon you will have the basis for a lot of nice things! Mary Aycock |
Stone Fireplace: Thank you for your enthusiastic comments about Mossy Manor and Fairy Hollow, Susan! My favorite is Mossy Manor, and I too would like to live there! You asked how I made the fireplace. The house is a 'kit bashed' Aster Cottage by Corona. It came with a die-cut wooden piece for the fireplace. It was just a flat piece with asymmetrical 45 degree slants in to make it more narrow at the very top. There is a hole in the wall which is walled in by the exterior part of the fireplace to give it depth. I started with that as my form to build on. I bought some 1/2" molding from the hardware store and notched its two front edges with my x-acto knife. I stained it mossy green (watered down paint) and glued it in place on the fireplace form. I collected rocks at the beach. They were glued on with Quick Grab glue, and then 'mortared' with Spackle. I also glued the rocks inside the opening and, after their mortar dried, painted with thinned black paint. The hearth (and 'floor' inside the fireplace opening) was also a wooden piece I covered in rocks. I used flat ones for this part. Again, I used black paint to make the floor inside 'burnt'. For the outside chimney part, I again used the wooden form that came with the kit. I didn't use the very top detail pieces, but instead made a cap with flat rocks, and glued little pointed (triangle shaped) rocks like a crown on top. There is a slight hole when you look down in, but I made it appear bigger with black paint. Pictures here: http://gerdesdesign.com/mossy.htm Anne Gerdes |
Bubble bath: A couple of years ago I discovered a way to create a great bubble bath, and ended up having it published in NN. I filled my tub about half way with resin and let it completely dry. I then took white beaded wax (the kind you make your own candles with). Sold at White Rose/Michaels etc. The beads are very small. I simply mixed tacky glue into the wax beads (more wax that glue of course). I then 'piled' my bubbles as high as I wanted! The effect was great. I finished my bathroom scene over 2 years ago, and the 'bubbles' have never discolored. Of course there would be more bubbles around the faucet where the water is pouring. Kathy Carey in Toronto |
Decoupage: I use Mod Podge (available at craft stores) for decoupage projects. I apply several coats, and sand in between each coat when dry for the smoothest finish. My mother swears by polyurethane for decoupage. It takes her a bit longer to complete because each coat takes longer to dry, but she gets lovely results. I get nauseous from the fumes so I only use Mod Podge. Michelle Fox |
Decoupage: Decoupage is easy, just get Mod-Podge or one of the other brands and follow instructions on the label. Basically, you use the decoupage medium to glue your paper onto the item, roll any bubbles out with a rolling pin or other round object (have been known to use paint bottles), let it dry, and then slap on several thin coats of medium over the item. Loretta Sniarowski |
Photos of Work Rooms: To view craft rooms (only 4 so far) go to http://members.tripod.com/~Kalron/miniture.htm, at the bottom of page under "Work Rooms and Studios" If you have a photo site of your work room please send your URL. Karolyn, Plymouth, MA |
| Previous 10 | Next 10 Page 689 of 1032. Total links in database: 10312. |
|
Browse the database (all entries) |