Turning ivory nut: I've turned it many times, and it carves and turns marvelously, but it smells like burnt toast. But it looks good, although a bit more white than ivory. There is a hole, which if properly planned, can be put to your advantage. (I've never soaked it first)...once I carved a baby dragon "hatching" from the nut, and I glued a cool crystal into the space in the center. It looked like he was wrapped around the crystal, and the outside of the nut, which is rough and brown, made up the bottom of the"egg" in which he lay. I called it "born in fire". The fellow I know who does the narwhal tusks works in beef bone. I've never heard of ivorine, but as an old Alaskan, I have a goodly supply of walrus teeth, which are still legal to jewelers and craftsman, as most can be found on certain beaches in AK if you know where to look.

Dave Pierce


Scrimshaw: Art Werner's miniature ivory scrimshaw has to be seen to be believed! He has whaling tools and other ships items too. You can contact him by mail:

Arthur F Werner,172 Louvaine Drive, Kenmore, NY 14223

Leslie, in Buffalo NY


Poinsettias (Christmas flowers): Just caught up on requests back to last Thursday. I make poinsettias by first cutting little rectangles of red flocked ribbon, then turning them into parallelograms (those things with slanted 45 degree ends, Form a circle of covered wire about 1/8 inch, glue end of the pieces to the circle, and then fill the center with something yellow. Little bits of bunka are good. The same shape can be used for leaves, but more accurate ones are made from an oval leaf that you cut a half circle out if the middle. Leaves are usually about the length of the flower petals which really aren't the flower, but everyone thinks the red is the flower.

Alice, queen of trash in IN


Poinsettias: I have seen full size poinsettias made from ribbon in this way. If you used much smaller ribbon and infinitely more patience you might get good relults. Cut little strips of narrow ribbon to the length that you want to be the diameter of the finished flower. I would guess no longer than 1/2 inch. Cut the ends of the snippet of ribbon into points and perhaps touch the ends of the ribbon with fray check. Make six of these ribbons. Then gather them together in the middle and secure. The full size flower was fastened with wire, but maybe tacking or tying with thread would be better for the miniature. For the center you could hunt for the tiny glass marbles in a craft store and glue a few yellow ones in the center to cover the thread. Poinsettia leaves can be done the same way, only in green. This is pure theory on my part, I have not actually done it.

Kellie in Omaha


Poinsettias; Ruth Hanke sells flower kits, including poinsettias in 2 sizes. She also has other kits, and punches, and how-to books. Website is http://www.hankypankycrafts.com She's very helpful on the telephone, and ships to Canada with no problem.

Kay Gale


Fly fishing stores have spools of mini tinsel for your Christmas tree! It comes in gold and silver. The gold one is made by a company named "Danville's" and it's called Mylar Tinsel. The silver one says "Lagartun" Varnished French Tinsel. Unwrap some of this and put it on your mini tree or wind it around a small piece of cardboard to stick in a mini tinsel box for the mini procrastinators. They come in different widths. The ones I purchased are LESS than 1/16" wide.

Annie Olson


Attaching Plexiglass: I use channel moldings mounted around the bottom and sides of each room. Attach one channel molding the size of the top of the room to the piece of plexiglass and then you have a handle to slide the plastic in and out of the moldings.

Roz Weitzman


Paint: When thinning acrylic paint use Matte Medium, rather than water. It gives more body.

AnaMae


Transparencies: There are two types of transparencies. Well, three, actually, but I'll get to that. There is one made for laser printers and another for ink jets. My darlin' 'liberated' a single sheet of laser transparency from his office for me, but we have an ink jet (most folks do, at home, as l. printers are VERY $$$) and the ink *never* dried. A week later, it was still wet enough that when I tacked the paper on the bulletin board to get it off the desk the ink sagged down the page.
The transparencies made for ink jet printers will dry, just as regular paper will. If you handle it too fast, the ink will smudge, but only for a half an hour or so - just like a letter. There is also stuff made for copy machines. It works quite well, but it has a slight grey cast to it, so you have to be careful where you use it. Some one suggested using clear address labels - I've never tried that, but it sounds good, if you can get it lined up properly. I think that I'd try the shipping labels, which are six to a page.

Dani Rice


Shop signs: I have two suggestions for shop signs.
1. Use your computer. Most have many fonts to choose from and will make them in a small size to start. If you happen to have Excel it has an option to print out the page smaller than its standard setting, i.e. on the print preview - settings adjust print to 50% smaller than normal.
2. Use dry transfer lettering. This comes in a few different colors, sizes, and styles. You will find it at most hobby and art shops. We have a train store that carries these. This application works best on a smooth solid
surface.

Preble McDaniel


Previous 10 | Next 10


Page 694 of 1032.

Total links in database: 10312.



Search for:


Browse the database (all entries)