Gift bag Vignette: Gift bags come in all sizes and can be found at many stores including Walgreen's in their wrapping paper and ribbon section. A square opening is cut into the front and slightly above the bottom of the bag and pieces of picture matting material is cut to make a support for the sides, back, bottom and lower front below the opening you have cut. Some people cut another piece to fit over those pieces as a "ceiling" and then add tissue paper in peaks. I made one where that top piece of matting was like a frame - and then had clear Plexiglas on that so light came in from the top. I suppose you could glue the tissue to all the sides and thus eliminate the need for the piece that fits over the sides. I have done two bags in 1/4 scale with front yards using some railroading materials - one Spring and one Winter with wreaths, garlands and snow: I also did a 1/2 inch one which had a picture of a house exterior on the bag and made a small sitting room in it. Usually another piece of clear plastic is slipped down the front of the opening. MiniGraphics came out with a kit in several styles, which had matching wallpaper for the inside. Those are in one-inch scale and I did a library vignette, which holds a desk, chair and floor globe, which turned out very nicely. The bags had rows of books as a design and the wallpaper was in scale home library shelves. The summer scene was in a floral bag, so instead of cutting a square, I followed the outline of the flowers on the bag when I cut the opening. Jeanette |
Copyright and Fair Use: Being a published author, I've been interested in copyright law for a long time. Yes, there IS such a thing as "Fair Use" of copyrighted work without permission. For those of you considering the topic of printing off the internet, I've posted a brief summary of the concept of "Fair Use" under the international copyright law in Lisa's forum. JJ |
Black sand: My use for the black sand is this. In order to make a stone look like garden stone minis I shape the basic form from air dry clay or a block of plaster. When the form is dry I paint it with a pewter gray acrylic paint. When that is dry I paint it with Elmer's glue. Before that dries I sprinkle the black sand on to the form an it yields that rough gritty look of worked stone. Bob |
Gypsy Caravans: To the person who wanted gypsy caravan patterns, there are three different sized patterns in the *HOBBYS* magazine that comes from Britain. They vary in price for the pattern, but I think are quite reasonable. If you want their address or e-mail, e-mail me privately. Diana |
Odors: As to odors in the house and miniatures, try placing cups of vinegar in all corners of the house. It will remove lots of odors. I have used apple cider vinegar or regular. Place a small dish or open jar of it in a box with the minis or inside a dollhouse. Dorothy |
Cleaning Silver: 1) Baking soda and water made into a paste. This is a rather coarse grit polish and may scratch fine silver; I use it for cheap-o stuff from the thrift store. 2) Never-Dull silver polish. It's cotton wadding soaked with an oily cleaner that cuts through tarnish quickly, and you can take off as much or as little as you like. Wash with hot soapy water after polishing. Cleans brass and copper, too. Doesn't leave that white stuff in the deep parts of the design, either. 3) The magic of chemistry: line a pan with aluminum foil. Place tarnished silver in the pan, and sprinkle baking soda over it (about a quarter cup for a 13x9" pan). Pour *boiling* water to cover the silver (hot tap water won't do it). It smells like sulfur. This takes out ALL the tarnish, even in the deepest crevices. I *think* that this method actually removes the oxygen from the tarnish, leaving behind all the silver. Other polishes remove the tarnish, which means you lose a little bit of silver every time. Lee |
Odors: Just thought I would mention a great product for skunk smell removal - our vet has a product called "skunk off" and it can be used for washing the dog or cat, washing clothes and to be put on outside furniture where a skunk has sprayed. Everything smells like peppermint afterwards but better than skunk right? Maybe it would work if put into a small container and set under a porch or whatever. It neutralizes the smell immediately on an animal. Donna |
Brooke Tucker Class Advice: Brooke has been teaching at my store for several years. Her workshops are an absolute delight. She gives freely whatever you would like to know, even things that might not be part of the workshop. I have had students in class who had never done a miniature, let alone take a workshop and their boxes were as good as students who had taken all of her workshops. Most important, follow her pre-instructions. It may not be how you are used to doing things, but there is a method to her madness. She is teaching you her way which you can easily adapt once you've done what she has instructed. Don't worry about whether you are a fast or slow worker, work at your own pace and you'll finish with everyone else. Don't be afraid to tell her you would like to make a few changes to the design. She loves to experiment if there is time. Don't substitute brands on her supply list. You might like something else better but she uses what works for her methods. Take advantage of her years of knowledge and experience. And don't worry that for the first few days everything seems to look awful. On the last day you seem to achieve perfection out of all that chaos. Pack your tools wisely. If she didn't ask you to bring it you probably won't need it. And although this may not seem important, buy what you can from the store where you are taking your workshop (if it is a store). The store does not receive any of the fee she charges. It takes a lot of work for the store owner to prepare and clean up for one of her classes. So they rely on your support to help compensate for all their effort. But most of all enjoy yourself. Everyone ought to take at least one of her workshops, that is if you can take her rendition of O Sol A Mio! Mary Kay |
Smoke Filled Room: I have seen at a quilt shop here in Omaha some very, very fine silk organza type fabric that is used in quilt restoration. It is stitched over the decaying fabric of old quilts to stabilize it and keep it from further deterioration. From a few feet away it is indiscernible on the quilt. I wonder if some of that , or something very like that could be put directly behind the glass to give the room a smoky haze. I also wonder if you were to stretch a panel of the organza out in the middle of the scene and then another right on the glass if it would create an illusion of depth to the smoke so that the things further in the room are more obscure than the things up close to the glass. Another tip is to color the ceiling of the room a cigarette tar yellow and put a yellow wash over what ever wall treatment you use. In Amsterdam there are coffee shops known as Brown cafes because the ceilings and walls are so tar stained from years and years of smoking. Kellie in Omaha |
Smoke Filled Room: Modeling a smoke filled room. You have set your self a challenge. Here's my thoughts: Smoke rises, it's usually quite thick at the top of the room. Rather than using smoked glass in front maybe using a clear sheet and painting the top with a mix of clear and smoky coloured glass stain so it is darker at the top. Walls and fittings should also be murkier at the top, maybe a wash will do the trick, I'm not sure what colour would be best. Maybe a grey if I recall smoke tends to be light. Mirrors or anything shiny should be matt at the top - maybe a puff of hairspray might tone them down (use something to protect the lower portion, maybe hold a ragged edged sheet of paper up) Lighting - if you have a stage it should have the brightest lighting, Ideally a spot lit singer, the rest of the room should be fairly dark, maybe a few dim candles in glasses on the tables. Cirkit do a spotlight, I have bought some but not used them yet so I don't know how good they are at only throwing light forward, you might want to build a little tube to go round a bulb maybe attaching little flaps like real stage lights have to direct the light only onto your performer. To make the effect of dim candles run the lights to the tables from a separate transformer to the spotlight, the spotlight should run at the usual 12 volts, but run the candles at a lower voltage, 9v or maybe 6v that way they will be dimmer and more orange. (they will also last longer) Sandra Monk |
| Previous 10 | Next 10 Page 696 of 1032. Total links in database: 10312. |
|
Browse the database (all entries) |