Button Ideas:: For Judie and anyone else who wants more "minis made from buttons" ideas I have quite a few. I collect antique buttons and whenever I buy collections there are always lots of old, but not especially collectible buttons in the boxes I get. When the New York State Button Society had an exhibition award in 1991 for creatively mounted buttons, I decided to use those "lesser" buttons to make miniatures and enter the competition. I made an antique shop with 52 different miniatures, all made of buttons. Here are ten ideas: A button in the form of a baby's face became a doll when given a pipecleaner body, a dress and a bonnet. A plastic clock face button was fitted with a fimo case to look like a Victorian china clock. A lucky find was a hollow clear blown glass button which I turned upside down and made into a snow globe by adding a tiny Fimo snowman inside and placing it on a painted metal nut base. A deep "cut glass" clear button made a perfect fruit bowl when filled with Fimo fruit. A double sided filigree button became a letter rack when pried apart and mounted on a flat button base. I added stamped letters to the rack. A plastic eagle on a globe button became the finial of a coat rack when glued to a pick-up-stick set in a flat button base all painted "brass". The tiniest pearl buttons with self shanks became the heads of walking sticks. Glued together, a domed brass button and a concave one became a old fashioned bed warmer when a painted pick-up-stick handle was added. Oval buttons standing on end became perfume bottles with the addition of a crimp bead on top and atomizer made from a bit of black thread leading to squeeze bulb made of texturized black Fimo. ( These bottles were made to stand on end with the use of E6000 glue. Nine years later, they are still standing on end.) Fancy crocheted and beaded round buttons became purses when they were turned on end and had thread handles and bottom tassels added. These purses hang from the coat rack. I named this little "shop" Button Box Antiques. It is contained in a 9" by 12" frame just 2 1/4" deep. I hope this gets you started on looking at those buttons and thinking "mini". Just a word of caution though, before you cut the shanks off any buttons, check with a collector of old buttons to make sure you are not ruining the value of a really expensive antique button. If you have any doubt, you can email me and I'll let you know if you have a rare button. In general, most plastic buttons are cheap enough to use, as are most plain pearl, wood, metal and glass buttons. If the buttons have figural subjects or if they have writing on the back or hallmarks front or back, please check them out before you use them. Darlene Focazio |
Button Ideas: Another great use for the shaped decorative buttons found in fabric stores and Wal-Mart's fabric department is: bookends! Available in so many themes, from buttons shaped like bottles (for a babies room) to those shaped like sailboats (for that nautical shop).Buttons make great ashtrays and candy dishes as well. They are an excellent "springboard" for you imagination! Alice Zinn |
When working with caulk (especially the clear caulk I got from Ladybug), I found that coating my finger with liquid soap makes it smooth really well, without sticking, clogging, bumping, etc. Monica from DE |
To support anything such as while paint is to dry etc. Use a carpenters rule. The 6 foot wooden folding type. While it is completely folded lay it on a flat surface and poke what ever needs upright support between any two (2) slats in the ruler. There I was holding onto the unpainted tip of this thing I just painted and was making 360's trying to find a place to put it when I plopped it down between the slats of the folded rule. DrBob...Delray Beach, FL. |
Teddy Bears Picnic: I bought two different small teddy bears - Hallmark and a bazillion other folks have them too - about 3 inches tall). I took one of those little fake trees you see at the dollar store and just cut it WAY down to fit into this 6 inch tall container. I cut a piece of thick foamcore to fit into the bottom of the terrarium - hexagonal, of course. I rasped off the edges to make sort of a slope to the front. I glued Spanish moss all over it and when it was dry – I spritzed it with some wonderful floral type green spray spritzey subtle paint.:) I had taken the little wooden circle base off the tree so it's trunk was just the center wire. I made a hole thru the foamcore and glued it in solidly - at the back. This way, you could pull out the whole darn finished scene and clean the inside occasionally. When I make these little terrarium (cheap) vignettes, I always leave a way to get the scene out so it can be cleaned. I made a picnic cloth out of tiny red gingham and also lined a small basket with the same material. I had some plastic earrings in the form of cheeseburgers and some others that were Frito bags (yes, these were earrings:) I got some of those little wooden pop bottles and stained them brown and put a coat of nail polish for coke bottles. I believe I also bought one of those teeny little fimo turtles at the craft store and put that in there. The poor bears were impaled so they could sit down on the blanket and partake of their picnic. W. Marie in Edmonds, WA |
Teddy Bear's Picnic: Years ago I made one up for one of my Nieces who really loved Teddy Bears. I bought a small basket with a lift off lid (looked sort of like a picnic basket. On the bottom of the basket I had a gingham tablecloth spread with all kinds of Fimo picnic foods. I had bought a pattern booklet for making small bears out of felt and I made the Mama, Papa, little girl and boy. I dressed the bears and sat them around the bottom of the basket. On my Niece's birthday I handed her the basket. She was really amazed and thrilled when she lifted the lid. If I were to make it again, I think I'd add a music box mechanism that plays the song. Paula in NJ |
Curtain rods: I made curtain rods by buying narrow brass tubing at the hardware store and cutting it to size, then hung them with small brass cup hooks. First, I opened the "eye" of the hook a little bit with needle nose pliers. If you want to get fancy, you can cover the ends of the rods with beads, either in brass or in a color to match your curtains. Rosemary in Cleveland |
Arts & Crafts Store: you could have wreaths, swags, dried flower arrangements, "antique" furniture, wicker baskets, "handmade" dishtowels, (trying to think what my local craft store carries), "antique" dolls . . . a great place to put all those minis you have with no intended purposes or the ones you bought because you just had to have and then it didn't look right or fit! Marsha, Newark, CA |
Clothes pins: Grandt Line has some really small clothespins, I got some with my 1/4 scale Grandmothers garden shed scene. But I think they are to large for that scale and more like - well wait I will run up and measure them. They are 1/8 long and very delicate looking, they are really neat. Kathleen in Colorado |
Making sand stay .. I did a beach house and used real sand.. Florida sand is the finest grain.. very tiny.. then I put it where I wanted it and mounded it up..etc. Then you mix Elmers Glue with water in a spray bottle (heavy on the glue). Spray the glue/water solution on the sand using index cards to act as deflectors around items you don't want the spray to get into. Spray well and then let it dry a few days. Your sand will never move. Small items embedded in sand will not be affected by the spray too much if you shield it with index card. Stevenia Tremblay |
| Previous 10 | Next 10 Page 699 of 1032. Total links in database: 10312. |
|
Browse the database (all entries) |