Quarter Scale Hammock: I suspect trying to scale down to 1/4 scale in macrame wouldn't do much but drive you insane. Perhaps you could look at the fabric store for various lace trims; the cotton, coarser types might have sections you could snip out and fray check to keep from raveling for a 1/4 inch scale hammock, then gather the ends, fasten to thread loops and hang from tree trunks or whatever.

Loretta Sniarowski


Making Mountie Hats: I have not done Mountie hats, but have done the 1920's cloche hats which have a crown just as high. I use a thimble as a base - of course you need to go through your thimbles to find the best shape.

You need to use *wool* felt. I have never found the man-made fabric felts to do anything other than frustrate me. Wool felt will stretch properly. You shape the crown over the thimble - hmmmmm.... put something on top of the thimble first so the crown does not have a flat top. Sculpey (fired)??? Tie it tightly around the bottom of the thimble, or wherever the flare will start. Then work the brim flat.

I put a few drops of white tacky glue in my warm water to do the shaping but not enough to make a sheen on the finished felt.

Joy Parker


Hat tip: I don't make hats, but I know someone who'll make any hat at...the drop of a hat. I always like to learn a new 'how to' even if I'll never use it. To shape a hat, she wets her material, whatever it is, with runny wallpaper paste, like thin cream or thick milk. It never stains the fabrics, and when it dries, it dries nice and stiff - like a hat should be.

Helen from York, England


Storage Ideas: For years I have been using the cardboard kits available at Wal-Mart and Bradlees, etc. that, when quickly assembled, become 9 compartment shoe box holders. I use 3 together and stack them up against the wall. This gives me 27 compartments that holds 27 shoe boxes filled with different dedicated things. I label the outside of the boxes with an index card that I just remove and change when I change the contents. The only drawback is that I have had to replace them every 3 years or so as they tend to sag and lean over time, but at the price, it has been worth it. For paint tubes and glues, I have found that the white plastic coated wire 3 bin kitchen or bathroom storage wall mounted shelving works great. It keeps it off the table level as my granddaughter has reaching hands. Also that Popular Mechanics article about nailing baby jar or other jar lids up into a high mounted overhead board and screwing the contents filled jars up into it provide instant visual access to what you have. One thing I am adding is the recently posted hint about using the vinyl see thorough shoe bag holder to mount on the wall.. that was great.

Stevenie


Organizing: I have 3 modes of storage for my mini-treasures that are waiting for their new home.

Really small items I put in those plastic pill boxes with the snap on-off lids. I also cut up pieces of felt for the bottom to avoid scratches. The pill boxes have 28 compartments in them, and if dropped, nothing gets lost! The pill boxes also work well for storing earrings!

The medium items go in plastic bins that have drawers, you can get them from just 2 drawers to large cart types on wheels. Both of the above are opaque/plastic.

The big stuff, furniture, goes into shallow cardboard boxes, stacked on the closet shelf and labeled, though I am also gradually picking up the 'shoebox' types so I can see what's in them without having to open them up every time I am looking for one specific item.

Items that need to be kept flat, flooring/wallpaper, etc, are laid onto a piece of sturdy cardboard and tucked wherever!

Janet in Orygun


Organizing: My stuff was ALL over the house and I could never find anything so I rearranged the office and moved everything in there. I set up two tables and put big items under them toward the back. A set of heavy duty metal shelves and two shelves of a book case, two drawer thingies with 10 drawers all together is for storage.

On the metal shelves, I have containers for soft plastic, hard plastic, wood, breakables, metal, electrical, hardware, fabric, trims, etc. Each of the big drawers is for each rooms's objects; i.e. all kitchen stuff goes into the "kitchen" drawer. 4 small drawers are for divided containers full of small things, see through of course. I am going to paste pictures of each room/drawer's contents on the outside of each drawer to save me having to remember. LOL

Sandy in Alberta


Storing supplies: The one most valuable thing I have learned, being in a climate that can get either very wet and damp and invite little buggies....or cold, which invites mice.... is that it is a good idea to put everything into plastic baggies before storing them anywhere. If bugs or mice do invade, it is an extra protection...especially from mice who tend to leave messy and disgusting evidence of their trek, however brief, over your stuff. Also, within a plastic box that you know is feathers, for example, it is good to have a plastic baggie for each color/kind. You can see them, and they stay clean, even if you take the plastic baggie out and forget to put it back for a long time. You can even keep a basket for throwing the baggies into until they can be returned to the proper box, etc. and the contents won't go flying all over your carpet, or wherever.

Another thing for damp climates or for supplies that someone gave you that have an odor you don't like....try putting them in a plastic bag (open on the end to let odors in/out).....in a plastic box of kitty litter. Alternatively, or additionally, put a piece of fabric sprayed with Fabreze, or spray it directly, testing first. And last of all, if you tend to get moths (which often you will from dried florals from stores, for example) you can put a moth ball right in the plastic baggie for a short time. It is something a friend of mine does with his fly tying feather stashes.

Rose


Smell removal: White vinegar will get out any smell on your skin - onion, fish, anything. Just rub with the vinegar then wash with soap and water to get the vinegar smell off.

Susan from St. Croix


Painting metal: My DH is a moulder (he makes things out of molten metal) so I asked him what to use for painting metals. He said for brass you can use an enamel paint with a suitable primer. Just make sure the brass is absolutely clean so verdigris doesn't grow under the paint. As for aluminum, you need to use a primer called Etch Primer, any good paint store should be able to tell you the American equivalent. For the top coat it is best to use enamel.

Dee Holst


LAMPSHADES: The shade's shape determines if ribbon will work. If it's a drum (same width top & bottom), ribbon is ok. If it's tapered (narrower at top), the ribbon will bunch and look lumpy unless you make a gathered or pleated shade. To fit the taper, the fabric must be on the bias so it has some give to it. If that's the case, make a pattern. Remove the existing shade from the lamp and set it on its side on a piece of paper. Roll the shade in a circle along its narrower end while you trace the edge onto the paper with pencil. Repeat, this time tracing the wider end. Result is a circle inside a circle wreath shape. Cut out, slit from line to line and wrap over the shade to fit. Leave a small overlap and trim away the extra paper. Then pin this C-shaped pattern to your fabric, cut out, and glue to shade. Even easier, use a compass -- measure the small circle and draw it on paper with the compass, then measure the length of the shade and draw another circle that size, cut out wreath shape etc. A bias-cut shade will look best in solid color or allover print; stripes end up wandering off track and don't look right. For trim, now that the craft stores have their holiday ribbons and trims out, look for tiny self-stick silver, gold, and other metallic braids if you don't want fringe.

Loretta Sniarowski


Previous 10 | Next 10


Page 700 of 1032.

Total links in database: 10312.



Search for:


Browse the database (all entries)