Witch ideas: How about: a broom closet, a sign that says "has anyone seen my vanishing cream", Witch Hazel (an actual rubbing ointment), Love Potion #9, gargoyle and moth-wash, and coffin syrup. Maria in MD |
Witch ideas: how about Death Boy Soap, Skunk #5, Brute, Dirt Plus Shampoo, Wrong Guard Deodorant and Rage Hair Spray. Shirley |
Christmas Fireplace Garland: You might want to try poster putty to apply your garland. Its removable and very easy to use. :o) You can find this in Wal-Mart or at Michaels Craft Stores. Peaches |
Altoids tins: Judee Williamson often uses the Altoids boxes (small metal lidded box) for gifts. She lines the inside w/ fabric or paper and puts a display of some kind - depending on the recipient - inside. She recently made some masks and put them inside the boxes. Looked VERY nice - - and it makes a fine present. Might be a good club project! Nicole |
Altoids tins. Wonder if they could be covered with leather and a tiny handle attached, and there ya go.........a suitcase! They in come in two sizes occasionally at Wal-Mart here. The regular size which is about the same size as those old Sucrets tins and a half size one that is only around once in awhile. Look for them near the registers. Linda Gibeault |
To "enamel" your appliances, try gluing aluminum flashing (sold in the home improvement stores) onto the wood. It's very thin and can be lightly scored/bent ...but only once! Bending it back in the other direction will snap it apart. I've used the stainless kind to simulate stovetops, hoods, etc. It's also available on a roll in reversible white/brown for white appliances! The aluminum color can be spray painted also (be sure to prime first so paint doesn't chip off). I just finished my "modern" range ... looks like a Viking complete with grill top! Jan Harris |
Christmas door bell: I purchased a Christmas pen last year from the $2.00 shop last Christmas that plays Christmas songs and a light flashes on the top. When I purchased the pen, I knew that I would have a "brilliant " idea of how to use it in a miniature scene. Well today was the day!!!!!!! The pen is plastic and has a coloured see through round piece on the top about 2inches diameter. Then about an inch down there is another round piece about an inch wide with a tiny button underneath. -Carefully pull the pen apart. -Take out the button and the music section -Discard the pen and the big round piece on the top. They might come in handy for something else..... - Cut the plastic above the small circle off. - Trim the plastic piece on the bottom to just underneath where the button will be. Leave about 1/4 inch. Check - Put the music and button back in and glue back together. - Work out how far you want the light away from the bell. - Bend the light carefully over. - Drill 2 holes one for the light and one for the button. - Glue 2 small washers on the outside of these holes to neaten. - Use a bead finding with a piece of tooth pick placed in the hole. - Glue music and bell on to the inside wall. - Test the tooth pick for length (about 1/4 inch) so it will go through the wall and push the bell of the pen. -I have hidden the music in a false cupboard and put in a stained glass door as wood would deaden the sound. -I "jammed" the button into the cupboard then cut out a strong piece of cardboard and pushed this in to hold the button, making sure that the tiny holes where left uncovered. Then put on the door. Karen from hot and sunny Dubai |
Snow: I put the snow on my Greenleaf Santa house last night. As I can't get Model Magic, I used white bathroom silicone. I also lightly sprinkled before it dried with the Christmas confetti (cellophane with the mother of pearl effect.) It looks great. I don't know why I bothered painting the roof so carefully now. Karen from Dubai |
Portable Workspace: Before I had a real place of my own to work on my minis, I worked out a system so I could do my work and then put it away and no one could see my mess. What I did was, I made a large work tray. You could use a piece of plywood or similar. Nail some trim around the edges to keep things from sliding off. Make it a good size. maybe 3' 2' or larger if you can or make two smaller ones even. Make one a work area and one to hold all your mini tools and stuff that you use all the time. On the front of the work space I put a tape measure and glued it on. Then I used thumbtacks or glue to make a row of cottage cheese or large yogurt containers, etc at the back edge. I stuck my tools in these containers. On the other tray you could put boxes and containers that are glued on to put just the things you are using to work on this project with. Now the good part. When I wanted to work on my minis, I brought out my tray or trays and put them on the coffee table in the living room. When it was time to stop I just took the trays and put them under my bed. This really did work. I really think I did more work then, than I do now with a whole studio just for my mini stuff. Barbara Del Duco |
Filling in Filigrees: I've just finishing solidifying the roof of an open-work plastic gazebo by lining the inside with masking tape, glue, and a couple of coats of gesso, and then poking lightweight spackle, thinned with acrylic medium, onto it from the topside. This reminded me of those lattice-work cake columns. You can change these to solid Whatever by lining them with wedges of card. Same thing for other plastic filigree items from the cake-decorating aisle (e.g., baby-crib to fancy terra cotta planter), or jewelry findings. Mary (Oregon) |
| Previous 10 | Next 10 Page 703 of 1032. Total links in database: 10312. |
|
Browse the database (all entries) |