Puffy bows for presents: I stumbled upon the puffy kind of bows for gifts yesterday when I was escaping from work for a while (it's too easy to start looking at mini-sites instead of working when you work on a computer all day long - - does anyone have a solution to this problem?). Cotton ridge miniatures

have them under the miniature kits section:

http://cottonridge.safeshopper.com/154/1544.htm?424

They also have a bow-maker for mass-production:

http://cottonridge.safeshopper.com/154/1547.htm?424

Asa in Fairfax, VA


puffy bows

1. take a needle and push eye first into a cork until only a short length (about 1/2 inch) is sticking out.

2. take a length of ribbon (fine organza) as narrow as you can get.

3. pierce the ribbon on the needle.

4. take the ribbon up the length of the needle and pierce again. Use a little glue to fix

5. Repeat moving around the needle until the bow is full enough.

6. You may prefer to sew to hold in place.

I don't know if this in clear but it is easy once you get the hang of it.

Roberta, DURBAN, SOUTH AFRICA


Marble Floors: I use Yes glue to put the marble paper down. If you want a gloss finish, I put a think piece of Plexiglas down on a bathroom floor. As long as all your trim pieces cover the edges so that you can't see it's Plexiglas, it looks great... if you want that glossy.

Fannye in TX


Keeping beads from bouncing: A tip I forgot to mention was to folks who use beads on their minis..if you drop them they bounce under the table and disappear. . The beading books I have say to use a piece of chamois cloth that you can find in the automotive section with the car wash items. When beads bounce out of your hand they land on the cloth and stay put..hope this saves a few bending backs..

Stevenie Tremblay


Micro mini dollhouse Copper Roof: I sit here in absolute amazement at how neat these Micro-mini dollhouses from laser tech are. I bought the Row Houses and have currently "remodeled" them for appropriate city living. When working with these little monsters I wanted to put copper and tin roofs on them. Guess what, the metal in the craft stores its too thick for these little houses. So there I was at a local drive-through and noticed that the chicken sandwiches were wrapped in paper backed "copper foil" I got several sheets of this and their tinfoil and went home....to make it with the "Seams" take your embossing tools and run it down the foil against a straight edge. It really looks like seamed copper roofing, and the paper makes it easy to glue to the roofs.

Sudie Parker


Small Scale Window decals: when I was making HO scale houses and buildings I came across a real neat idea for the windows. a lot of the kits I bought didn't have the kind of decals that I wanted nor could I purchase the kind I wanted separately so I started going through magazines and cutting out the smallest things I could find for my buildings. For instance if I was making a hotel I would cut out visa m/c discover ect.. if it was a fish shop little fishes... grocery store then products for that stores window, I would use two way tape to put the piece on then clear tape on the front to protect it then use an X-acto blade to detail it and there I had it a decal of whatever I wanted to put in the window of my store. needless to say I went crazy with this and now have so many of my own made decals. some that are so small they could be used for N scale houses also.

Rhonda Platzer


Skeleton Leaves: Here is a 19th C recipe for making skeletal vegetable matter, so even those without gardens can achieve results. This comes from 'Enquire Within Upon Everything', dating from the 1850s. Simply pick leaves, pods etc. and leave in rain water, in an open vessel exposed to the air and sun. Water must occasionally be added to compensate loss by evaporation. The process requires a great deal of patience, as ample time must be given for the vegetable tissues to decay and separate.' There follows a 'speedy' method, which involves adding a 'tablespoon of chloride of lime, in a liquid state, to a quart of spring water' then soaking the leaves for 4 hours. But any 19th century recipe involving chemicals surely scares me, so me, I'd stick to the plain rainwater way.

Helen from York, England


Skeleton Leaves: As an old flower arranger this was one of my do-its. Use very firm leaves, fully developed, and Chinese lanterns. Add 2/3 cup detergent with bleach in it to 1&1/2 qt. water -- bring to boil in 3 qt. aluminum or enamel pot; simmer. 1 tsp. sugar Prick each lantern with a pin several times to allow solution to enter; add leaves or lanterns to solution, one at a time, enough to make one layer on the water. Keep material covered with solution by pressing down with a wooden spoon, GENTLY. Simmer 12 minutes. Remove to a pan of `warm' water and - Leaves- spray with warm water until green is washed out, use a FINE brush to finish; lay on paper towel to dry; place between towel sheets and press for 2-3 days. Leave natural, spray with color, curl around pencil for shaping. Lanterns - hold by stem and gently dab at it with a FINE brush; orange will flake off; gently squeeze seed sack out bottom point of lantern; lay on paper towel to dry. use stem or re-wire to stand in vase and cure; you can spray on color. If you really require white - bleach in 2 tablespoons household bleach to 1 qt. water for several hours between the brushing and towel drying. Do lots, because just as you finish brushing or picking up off towel -it's ruined.

Anne Gerdes


Canvas for Mini Paintings: Stretch your cotton fabric as you would a regular canvas. Then PRIME with Gesso. Sand lightly for a fine finish as bumps would be out of scale. You can now paint in any medium you wish acrylic or oil. Gesso keeps your fabric from deteriorating. Paintings are meant to last longer than clothes.

Laurie Sisson


Canvas for Mini Paintings: I do my mini paintings like I do my full size paintings. The exception is that I use a cotton material instead of canvas so the mesh is more to scale. I build my stretchers from base wood cut to the sizes I want. I stretch the fabric tightly on the stretchers and use glue to fasten it instead of staples - even the smallest that I find are too large. Then I apply three coats of gesso, drying in between. Then I paint. I am currently using water soluble oils for the first time and I like them much better than regular oils. In my art class, the professor said that modern oils are not framed and that is the way I sell most of mine since I am not a big fan of Victorian and am never satisfied with the Victorian frames that I can buy. I do make modern frames for my watercolors and colored pencil art.

Mary Lou in Portage, IN


Previous 10 | Next 10


Page 705 of 1032.

Total links in database: 10312.



Search for:


Browse the database (all entries)