Out-Of-Scale Silverware Ideas:

1. Lose it in the food you are making. The spoons can be placed so that only the handle sticks out of a dessert, cereal , ice cream etc and the bulk of the length can be "lost" inside the food or cut off the bowl part of the spoon. Knives can be "lost" in a turkey or cake, forks in any food. That may not be what you intended when you bought them but the illusion is the same.

2. Another idea is to decorate the silver with tiny flowers and such and hang them on the wall in a kitchen.

3. Or use a set as Salad Bowl servers they are at least 12 inches in real life.

Gail Spector


Model Magic Cats -- don't see why you couldn't use it. If you are making them in scale, you wouldn't even need an armature either. Model magic does have the tendency to want to "round out" and dry before you can get all the detail you want, so you have to work fast.

Kim Bulback


Mosaics. I have two ideas for you. The first, if you have a graphics program on your computer, you can scan in a picture, or use one which is on your hard drive, floppy, CD or click art. Using the "format" button in your graphics program, and "image", choose "mosaic" and there you are! If you print it out on a textured paper, for example, canvas paper, the results should the wonderful!

The second way is more time-consuming but also would work. Using well washed egg shells, break them into tiny pieces, color them, and create your picture. Or, you could glue them onto an existing picture, and color them appropriately to match it.

Alice Zinn


Hanging Wallpaper: I apply my miniature wallpaper the same way I decoupage in real life.

(1) I coat the surface the paper will be applied to with a healthy coat of plain white glue - school glue, not heavy craft glue.

(2) I dip my paper into warm water. Please note: I said DIP not SOAK. The latter is only applicable if you want to make paper mache. This relaxes the fibers and is a great assist in the elimination of air bubbles.

(3) I coat my hands with white glue. This keeps them from grabbing or tearing the paper.

(4) I apply my damp paper to my gooey surface. It will slide easily by gently placing my entire hand, palm down, over the center of the paper.

(5) When satisfied with placement, I use a brayer (rubber roller) to smooth my paper. Do not use the side of a credit card as a smoothing tool in this type of application. NOTE: the damp paper opens the fibers and allows air to escape through the paper. I do not have to worry about smoothing from the center to the outer edge, etc. Or have a panic attack when I find an air bubble. The damp paper delays drying time and gives me all the time I need to be satisfied with the application. My only concern is to be sure my paper is pushed gently and thoroughly against my floor, wall or ceiling.

(6) The next step is to use a damp household sponge to remove the excess glue from the top and edges of the paper. I rinse the sponge after each

stroke. You can't "clean" if you don't keep the sponge clean. My final step is to clean me. I usually am wearing more than one small sign of my efforts. I am especially famous for wiping my hands on my bottom.

(7) I like to seal with the same acrylic varnish I use on the canvases I paint. My favorite brand is FolkArt water based varnish by Plaid. It is non-yellowing and water clean-up. I use a sponge brush to apply this. NOTE: you can practice this technique with any scrap piece of paper and scrap piece of wood or tile. Doesn't hurt to get the "feel".

- In response to your query about the wallpaper sample you would like to use for tile, I would apply it exactly as the mfg. instructs. This is probably premixed wallpaper adhesive and soaking your piece of paper to activate the glue on the back side. It would not hurt to call any store that sells items made by this mfg. to verify their directions.

- Before I go, I'd like to remind you that your creation is an artistic expression of you. Don't worry too much about perfection in your work. If you strive for satisfaction, you will be much happier. If there is a bubble in the floor when it has dried - break it, color the hole black, lay miniature fire crackers and a box of matches beside it and you have created the presence of the naughty little boy that played with matches in the house! My point is to learn to roll with the punches and keep your sense of humor. Often the boo-boos are the greatest challenge to our creativity and the best encouragement to express our individual personalities.

Becky


mosaic-look icons: Make color copies of the image you plan to use, then use several coats of ModPodge or transfer medium to create a decal, soak in water, peel off paper backing. Coat your icon base (card or wood, whatever) with tacky glue. Break clean eggshells into flattish sections and smash them into place to cover the base so they break into smaller mosaic pieces. Once that's dry, cover again with tacky glue and smooth the decal into place over the shells, then weight to dry so the mosaic texture comes through the decal. Enhance the mosaic look with a wash of thinned burnt sienna acrylic rubbed down, then seal with a clear coat of acrylic.

Loretta Sniarowski


Sealing Paper: J. Hermes makes "Super Sealer" which is brushed on and dries to a gloss. I have used it on floors quite often.

Also if you cut art work from catalogues, you can glue it to cardboard or mat board, brush on the sealer and before it dries rebrush to imitate artists strokes or "pounce" on it with a fine sponge and it looks very authentic when framed.

When I use real wallpaper, I use real paste. Some of the papers are so thick that dh paste doesn't seem to do the job.

Dani


Flood Scene: you might try what I did awhile back for a fishing scene I made my father in a Chivas Regal box. Backdrop was a Sierra Club calendar sunset lake photo. The human element came from fishing equipment (patterns in Venus Dodge's needlework book), keychain Coleman lantern and cooler on the pebble jetty. Built the jetty out into the "lake" with plastic water sheeting for the surface (built half the jetty, inserted the water sheet, then piled more rock on top so the "water" came halfway up).

For the side view of the underwater area, I glued a section of pale-blue tinted transparent plastic file envelope against the cellophane window in the box up to the level of the water sheeting before the w.s. went in. Before the "water" went in, also landscaped the bottom with tacky-glued beach sand, tiny shells, and air fern seaweed; glued resin fish to clear plastic tabs of different heights on button bases disguised by sand/fern so the fish were "swimming" at different levels.

If you can't find the ready-made water sheeting, you could use the plastic file envelopes and make a rippled surface by tacky gluing wrinkly plastic wrap to one side of the file. This was one of those try-it-to-see-if-it-works projects, and the results were fairly pleasing.

For floodwater, you'd need a wash of nasty browny-green acrylic to give it that muddy look, debris piled in the corners (dirty twigs, dried coffee grounds, plastic bags, cans, lone shoes, and other nasties the water dragged in, and a darker browny-green line around the walls for the high-water mark. And don't forget the muddy, slimy carpeting).

Loretta Sniarowski


Re: Free online websites easy homepage builders:

Just a note of caution...I've noticed some of the online websites easy html/home page builders do not automatically put the image size dimensions in the HTML code that is generated and the pages take forever to load: a real turnoff to a lot of potential viewers.

If any of you are putting up a web site it's really a good idea to check your html code, to make sure each image has something like this for each image used :

height=xxx    width=xxx      (with of course the actual pixels instead of the xx's) :-)

You can check the actual code on your pages by using:

View  Page Source  in Netscape  OR View Source in Internet Explorer

To edit the code you can load the htm or html file in Notepad.  But you will need an image editor that tells you what the actual image dimensions are first!

IF you use Netscape Composer or FrontPage those programs will automatically insert the height/width tags for each image for you.

Wilma Kinder


Websites: What's the first thing I should do?

Wow! Ok, this isn't *just* the first thing, but this is the preliminary idea....

Assuming you have a business (you mention shows) and all the things you need for that (insurance, tax numbers, license etc. if applicable). Assuming you know how to make products that are saleable (and have them priced so they will sell). Assuming you are already prepared to do mail order (and packaging, orders, shipping etc).

Now that we have that out of the way (no techie stuff yet), what do you want to do with this site? Why do you want it? What are your goals, purpose, reason for having it? Are you selling all your products? Your favorite 10 products? One really expensive product? Custom orders only? Is your website going to have everything you have for sale or a selected portion of it? Deciding your goals and purpose is the first thing you need to do when moving a miniature business to selling online.

How easy do you want to make it for your customer to purchase?  A shopping cart, order form they fill in, something they need to print and mail to you?  How can you accept payment?  Money order, check, credit card etc.

Now you need pictures.  Do you have a catalog already, or professionally (ie look great) photographs?  If so, a scanner will probably be your next step.  If not, you need to decide if you are more comfortable with a conventional camera, or a digital.  Layout, composition, lighting and scale are all things to consider with photographs.  Once you have digitized your products, you will need to optimize them for the web.  This is something I could fill an entire digest with info on.  I'm not going to go there today!!!

Pictures are only half - a picture may say a thousand words, but without description, sizing and price, it is unlikely to sell.  So content becomes all important.  Even if you have everything else "perfect", lousy content is lousy sales.

Next you have to figure out how you are going to put all this on the web.  How is going to dictate where so I'm going to leave that for now.  You can: learn html and write it yourself (and design all your page layout, graphics etc.); use a software program that will visually assist you (WYSIWYG program possibly) - learning the software and all it's tweaks; "hire" a friend who will do it "cheap"; or hire a professional who will worry about the structure, layout, navigation, function, appearance, and promotion for you.  Don't misunderstand me - you may discover a passion and a joy doing your own site - this may be something you love doing - but some of you (and you know who you are) would rather be making minis than debugging some webpage code.

Where to put your pages?  If you are using FrontPage and are using the extensions, you will need to look for a host that supports that.  If you like a free site and their templates, then you will be looking there.  You may have a site with your ISP already (which may or may not be usable for business sites).  A designer you work with may have a preference of which host they work well with.  So until you have an idea of how, where is kind of a moot point.

Just as an example, "anyone" can make foods from Fimo.  There are lots of tutorials on how to make things, perfect them, learn new tricks.  Some people will want to learn it, some will try and decide they would rather do other things, some will purchase the "pieces" to assemble, and some will rather buy an artisan piece fully finished.  The same goes for webpages.  The only way to decide the value of having someone else "doing" your page for you is deciding if you would rather spend the time or the money.  It is going to take more of one of them.

Noella


IBEC does have a site and all their wood is pre-cut and is all cedar and excellent kits.

IBEC http://www.ibecwoodproducts.com

They can be ordered from Upstairs/Downstairs here in Victoria, BC.

upstairs-downstairs@home.com

Brass Palm Leaves are available at:

Phoenix Model Developments from England have them (item AF23)

http://ourworld.compuserve.com/homepages/phoenix_models/Homepage.htm

 Also -

Verlinden Productions (811 Lone Star Drive, O'fallon MO 63366 USA) item 0058

http://www.verlinden-productions.com/

Verlinden's are 1:35 scale outdoor palms - but these work as indoor palms in 1:12 scale (Verlinden's longer leaves are the same length as Phoenix's but the fronds are more delicate). Shops that are into military modelling (tanks & things) will sell Verlinden, and any good miniature shop should stock Phoenix.

Sandra Monk in New Zealand


Previous 10 | Next 10


Page 709 of 1032.

Total links in database: 10312.



Search for:


Browse the database (all entries)