Cutting Glass Vials: Freeze dried bacteria used for research come in glass vials and the vials have to be cut open. The way I did it was to first score the vial. That means to make a mark on the glass with something sharp. I used a file. Heat the vial. I did it over a Bunsen burner, but you could do it over a stove or cigarette lighter (use forceps of course). After it's heated, put a drop of water on. This breaks the glass along the scored line. Use eye protection.

Carol


Cutting Ostrich Eggs: I cut my "nautical" ostrich egg using a diamond bit in my dremel tool. The bit looks sort of like a disc mounted perpendicular to the shaft. You can buy them at jewelry supply stores and some hobby shops, and also there are many places online selling them. WEAR A DUST MASK when working on your egg. Unlike many other diamond bit applications, this cutting is best done dry and will create dust that is definitely not good for your lungs. You can cut very intricate designs with these bits, the ostrich egg is very strong and will take lots of cutting without breaking. There are other diamond bits that can be used for carving and shaping your egg as well.

Bonnie Gibson - Tucson, Arizona


Bending Plexiglass: You do need heat to bend Plexiglass. I like to use Lexan, which looks like Plexiglass except you can put it on a table edge and just bend it without any problem - no heat necessary. As well as using it for room boxes, you can get a 'thinner thickness' to make stacking tables.

Jonesy


Bending Plexiglass: I asked my hubby who has worked with Plexiglass and he said to heat it in a 200 degree oven till it is pliable, then bend it on your form.

Sue


Bending Plexiglass: I put it on baking paper in my oven at 120°C, time depending on the thickness. Pull it out of the oven on the paper and drape over whatever you want to form e.g. a round tin for a rounded window etc.

Dorothee


Bending Plexiglass: Do your Plexiglas in the oven around 300 to 350. The time depends on the thickness of the Plexiglas. Wear heavy gloves and have your jig ready to mold the Plexiglas. You can seam it by using ethylene dichloride. You need to use caution as these fumes can cause liver damage. I use a hypodermic needle.

Nola on Padre Island


Ziplock Bags: Also, for those looking for the little Ziplock bags, try: Jinny's, 419 874 7961, 891 Shearwood Drive, Perrysburg, OH 43551

Grace Shaw


Barbed Wire: Find some unpainted steel wire like they sell for florists- in a fairly thick gauge, maybe a 16-18 gauge or so. Cut some little one inch pieces for your barbs. Take a long piece and fold it in half (or 2 pieces if you are using precut lengths instead of a spool) It works best if you clamp one end in a vise to free up your hands. Twist a couple tight turns near the vise end, lay one of your 1 inch pieces next to the twist and twist the long wires again, continuing to add the short pieces every few twists. Try to twist evenly as you go. When you have the length you need, the short pieces can be crossed overtop of the long twisted wires to form a tight loop with ends protruding. Snip these ends so they are fairly close to the long twisted wire to create your barbs. For added realism, you can soak your wire to create rust and spray with a sealer to keep it from wiping off.

Bonnie Gibson in Tucson


Ziplock Bags: Craft Creations Ltd. sell zip lock bags! http://www.craftcreations.com

Noni


Texturizing Catalog Prints for artwork: Scan the pictures into the computer, then using something like Photoshop apply a gausian blur effect or maybe use the "finger Smudge" tool to simulate brush strokes . Then print the picture out on your computer printer.

Marc


Previous 10 | Next 10


Page 714 of 1032.

Total links in database: 10312.



Search for:


Browse the database (all entries)