Old Veneer: I had some ragged sheets of old veneer kicking around and just put it on the outside of a mountain cabin I'm making. Wonderful aged plank siding! Score planks with black ballpoint pen, Poke the tip of the pen where you want nail holes, add a few "joints" by making a wiggly line across 'planks', then add nails in appropriate places. Outstanding results.

Source: Possibly old furniture stores, junk stores, Landfills (if you can get there). Ask junk shops to peel it and save for you, or just old veneer furniture left in the yard in the rain. Old veneer is much thicker than the new stuff. Strange to have walnut siding on a miniature cabin, but it's pretty nice looking.

Judie - Daytona Beach, FL


Stained Glass: There are several good brands of glass stain on the market. They come in little bottles. Cut thin strips of metal tape and lay them in place. Burnish with your fingernail or a little stick. Drop in color. The really hard part is choosing the pattern. Decide you want Tiffany? Go to Jim's printables and choose his designs for glass. Computer stores carry decal "paper" to print onto. New company called Invent It has a clear decal too. Print off the design, sandwich it between thin acrylic if you want it to last forever or just stick the decal on your existing window and you are a genius. If you find a better design to print later, the decal can be removed by lifting it off and saved for another project.

Laurie Sisson


Stained Glass: I read recently about someone using the thin plastic windows that are laser cut and it reminded me that I bought one as a door insert on my room box. I wanted a more stained glass look so I used black acrylic paint and painted/rubbed it into the crevices. Be sure to do this on the cut side - the other side is smooth. I let it dry, then with an only damp Q-tip wash it off the "glass" area. It looks great.

Susan from St. Croix


Stained glass leading: I believe the stained glass leading you spoke of is a self stick leading strip, available, among other places, I'm sure, in Michael's. It comes in a long, light blue package and is made by Gallery Glass. It is called Redi-lead. It is available in various widths, and even circles. Only the narrowest width is applicable to minis. If you use this product, be advised, the edges of it stay rather sticky, and once you apply it, it can't be moved or changed much.

Alice Zinn


Stained Glass Leading: I have found the ONLY real suggestion for the lead strips in windows is to use copper foiling tape, cut into thin strips - a couple of millimeters at most (or 2 or 3 of those skinny lines on an inch ruler!), stick it onto the glass and use the soldering iron to run a bead of solder along the length of copper. You get a really fine lead line. Just blacken with paint on patina. It's an adaptation of the tiffany glass method and providing your design is not super detailed it works a treat.

Trace


Making Plate Decals: I make colour photocopies of plates reduced to the right size. They must be full face on, bright and clear. Of course, if you want a dinner service, and not just plates to hang on the wall, then you must make bowl-size copies and side-plate-sized copies, as well. I paint these with decoupage transfer medium, 2 coats, leave to dry and then cut them out VERY accurately. I then soak them overnight or longer (they take no harm left for weeks). I rub the paper off the back of the photocopied plates leaving a thin transfer. I slide this onto the wet plates with deco varnish, position it, smooth out any bubbles with a wet brush and then leave them to dry. Three coats of deco varnish, with drying time between, finishes them off with a shiny finish.

Barbara B


Mica for Windows: Now this might take some experimenting by folks, but hey isn't that where our greatest mistakes are made(we won't mention the failures at this time)! On a HGTV show by CAROL DUVALL, they were decoupaging a box with mica. They showed how to stamp it and emboss, then peel them apart, and keep peeling the layers till you get a very fine one. Then they cut them with scissors! I was thinking the whole time, not about decoupaging on a box with added hand made tree paper, but how this would look in the window of a dh! Mini minds never give us a break! The show said you can buy mica 'leaves' in bags from craft stores.

Lisa in IN


Scrimshaw: My uncle, an engraver, also does scrimshaw. He gave me some really nice poker chips made out of the faux ivory that were just the right size for small pictures. Maybe you could find some of these in antique or thrift stores. I also did a piece of scrimshaw on a slice of deer antler but it took a LOT of prep work to get it smooth, so overall wasn't really worth the trouble (and it never did get really smooth like ivory does, but it was an interesting effect nonetheless).

Tori


I have used mica for fairy baby wings. It is extremely fragile when peeled to a transparent thickness -- much too fragile for windows in my opinion.

Anne Gerdes


MICA in old stoves: Mica used to be used in tiny viewing windows in the Parlor stove. I remember (sure dates me - sigh) my grandmother's parlor and the glowing stove gently hissing on winter afternoons...

The 'windows' were irregular looking and not more than 2 inches square... the transparent material was yellowish and was Mica.. Later in my life I found a chunk of it lying somewhere and had fun peeling it. Very delicate, Very pretty. Would be fine for DH windows if treated with a transparent glue to stabilize it.

Judie - Daytona Beach, FL


Previous 10 | Next 10


Page 717 of 1032.

Total links in database: 10312.



Search for:


Browse the database (all entries)