Stabilizing butterfly wings: I use a clear laquer spray to give them 2 thin coats to prevent flaking, then paint a thin layer of petal porcelain on either side to strengthen them and give the wings flexibility. The petal porcelain dries clear. If preferred you can apply 2 coats to the wings to give them strength.

Karin in South Africa


MICA --where to get it: I read the post about mica, and it can be purchased in sheets from Van Dykes catalog (I just got some to crunch up and put in my marbles). The mica from Van Dykes is transparent, perfectly flat, strong, but a little smoky in color. It is called isinglass and was used in old stoves. I can't get to a catalog at the moment, but if anyone want the info they can email me.

Jane Walker


Painting: I'm also in the process of painting windows, and found a wonderful tape at the Builders place, don't know it's Proper name, but it's 'low-tack' tape, which means it doesn't leave residue on the surface when it's removed. Check the painting section in your building place or hardware store.

Painting the outside of the windows after they're placed isn't a problem, it's painting the inside after they're in place that is! And the task becomes more grueling if you need to do more than one coat and ? varnish. So, at least do the inside before you paint? But, won't you need to have the inside walls finished first?? It gets so complicated!!!!

And I believe (correct me if I'm mistaken) that the outside of the house needs to be finished before the windows are in place.

Janet Kay in Oregon


>> Painting the outside of the windows after they're placed isn't a problem, it's painting the inside after they're in place that is! <<

And that is why I don't glue in windows or doors. I use a bit of Minihold.

Carol


RGT's Windows: Congrats on your Newport purchase! It's a good sized house, and the instructions are very well done. I've built 4 of this model ! :)

My first suggestion in line with your question about assembling the windows first, then painting.... This is OK, but leave one side UNATTACHED - the plastic 'window pane' slides into the frame. I have sanded, etc., then glued

3 sections of each window frame together...after the glue was dry, I would go ahead and paint. along with the 'unattached' final frame section of each window. Once you've painted all the window framing, go ahead and slide in the plastic 'panes' then glue the final section of framing in place.

I would also suggest that you read thru the instructions, and begin to think about what paint colors you will want for certain areas, like the outer, exposed (exterior) edges of the floors....these need to be painted before you glue/assemble them....i.e., the second floor actually extends beyond the outer walls (on the exterior of the house), so it's far easier to have those areas painted before you glue the second floor in place - it will be on top of the first floor walls. I also use nails to hold the floor as well as a line of glue along the top edges of those walls...gives the house a bit more stability and strength.

There is a lot of 'pre-planning' in this particular line of RGT kits, but they really do turn out nicely. I hope I've helped - have a great time!

Laura in OKC


Office items (accessories): pencil cup, stapler, tape dispenser, hand cream, scissors, calculator, task light, rulers, file folders, file folder holders, in and out trays, telephone, diskettes and holders, calendar, phone and address books, small rotary file, garbage can, letterhead, paperclip dispenser, extra chair for client, flowers in pots or vases, tissue box, clock, mailing supplies, blank paper, graphs and charts, pictures and personal items sitting on desk and computer.

Sandy in Alberta


RGT windows: I am STILL building that same dh, though I can say, all windows are completed. You def want to paint the windows before you assemble. I put an unpainted one together and rubber banded it for a sample so I could take a look at it thru all steps. Then I put each window together, b4 painting and marked the glue part with an X so I wouldn't paint it! It really helped with the interruptions I received; phone, dogs, cats, rabbits, kids (who for some reason were hungry), doorbell, kids friends, car pooling laundry.... After the first time I was stopped dead in my tracks when I didn't want to be I tried it this way and it calmed me down considerably (or so my kids thought!).

The other thing I learned was to paint or wallpaper the inside rooms BEFORE you put the windows in! If you don't believe me, just come over to my house for an afternoon of painting/papering while the windows are in. I made real wood floors for mine, (b4 I put it together).

Lisa Lynn


Zip Lock Bags: Don't use your mouth to suck all the air out of the bags - put a straw in it at one side and zip tight to it, then suck air out through the straw pulling straw out while still sucking and ZIP that last 1/4 inch closed.

Kathleen


Cutting Compact Disc-Holders: I've cut these holders with my Dremel Tool and the thinnest disk available. It worked well and now I have two pieces of 'glass' for my front door. I started gluing painters tape onto it and drew the necessary lines with pencil. I put the Dremel in its 'foot' and held the plastic with both hands (with the elbows fixed onto the table) at the underside till it touched the disk. Doing this you can see exactly where you are cutting.

Marjon de Haas (The Netherlands)


Replacement Windows - Timberbrook makes window sets for several Greenleaf houses. They include: "Pierce", "Westerville", "Garfield" and "Jefferson". Dee's Delights carries them so they are available through your local miniature shop.


Previous 10 | Next 10


Page 718 of 1032.

Total links in database: 10312.



Search for:


Browse the database (all entries)