Grass: For dune grass in my dock scene, I used simple green thread in the shade that I felt was right. To make it more like flat blades of grass, I did the following;
1;I cut a number of 4, 5, and 6 " lengths of green thread, (cotton) longer than required. Knotted them together at one end. I wet them and then tapped them gently with a hammer on a wood block. Do not hit too hard or the "grass" comes apart and separates. By gently tapping, I flatten out the round thread and they look more like grass.
2; Cut the "grass" to the length you want, measuring from the knotted end.
3; Make a small hole into the surface that you want the "grass" to "grow" place a wee drop of glue at the orifice and poke the instant "grass" into place.
4; If you want a measure of yellowing, gently brush the "grass" with a mild bleach solution. I tried using yellow water coloring and found out how to make "blue grass" (yellow and green = Kentucky blue grass;-)

Dr. Bob


Wine Bottle Lead: The lead from wine bottles is great for making pewter plates. Cut out a circle and emboss over a small plate or button or, some wine houses have the tops (on full bottles) embossed with a picture already. Cut carefully round the top, turn upside down and carefully flatten the border. If you want a matching set you just drink more wine.

Dorothee


Wine Bottle Lead: A couple of years back, either DHM or MC had an article advising people not to craft with this stuff. Supposedly it corrodes over time, giving off toxic fumes. Maybe this wouldn't matter in the tiny amount needed to weight fly paper, and maybe this is just one of those folk tales, but if you have small humans or pets around the house, it may not be worth the risk.

Loretta


Wine Bottle Lead: Wine bottle lead (and lead used on fishing lines) can be melted in a tin on a low heat. We used to pour the liquid in empty matchboxes to make paper weights and my brothers used it to put some more weight in their trains. Take some baking paper and pour (or draw with the help of a skewer) thin lines of the liquid lead and let it cool. You could use those strips for lead lighting. Maybe you can draw the lines straight onto glass but I haven't tried that (yet). The lead is very soft so you can easily bend a strip to whatever form you want.

Dorothee


Instant-Gardening: I have been gardening half my life and the first thing you learn about gardening is how to prepare the soil so I did the same in my miniature garden. First, I cut a piece of cardboard in the size I wanted for a border. Then I cut a same sized piece of the green foam which is used to make dried flower arrangements. The green foam can also be used wet. Caution! Wash your hands after cutting the green foam and please don't rub your eyes, as it is crumbly stuff and rather sharp. I put Tacky glue or just simple white hobby glue on the foam and spread out the "topsoil", not too much at the same time as glue dries quickly. I use the dust of dried tea bags for this, mixed with green stuff from the model railways. If you don't have that, just grind Deco-moss (comes in different shades of green) in a cheese-grater and spread it all out. If wanted, put the rocks in place. Place a shrub or a topiary-shrub in the border. Now starts the fun bit - the planting!! In advance, you have already collected tiny dried flowers, tiny silk flowers and the very talented folks have made their own! Plant all this in your border like you would do it in real life: matching colors, putting the high plants in the back of the border. There is no other rule other than your own taste! For more green, use little pieces of moss here and there, or make some green plants such as hostas (the easiest ones)or use the little green plastic leafed stuff you see at delicatessen-shops! Forgot to mention something important: the cardboard and the green foam must be glued together. The cardboard gives support to the foam! Of course a piece of trilex/balsa can also be used, but I realized that everybody has cardboard at home and it is cheap and easy to cut.

Atie Jonker


Lite Brite Pegs: Looking for Brite Lite Pegs - try Toys R Us, or a similar store. I have seen them in bags of various sizes.

Dani


Flower Kits: Judy's Little Gems is still in business. She has her sister putting the kits together now and the address can be found in the back of any of the Dollhouse Miniatures magazines--Judy's Little Gems, P.O. Box 501, Brazil, Indiana 47834. You will like them, I'm sure. I carry the full line, too.

Dottie in Tucson


Feathers: I have parakeet feathers. I sold a few on eBay and that got me started making miniature glass items and making friends here! I need some of the feathers for quills for the inkwells I make, but most are not appropriate. I don't have enough for stuffing pillows, but if someone wants some for decorative uses (dusters?), I'm sure we can work something out.

They are not listed on my site, but you can contact me though it. http://www.walkerillustration.com/~janewalker

Jane


Ponds: One of the things you requested was info for making ponds. I've been following some great instructions over at About.com. Here is the site:http://www.miniatures.about.com/hobbies/miniatures/. Just click on "Water Garden Project Concludes" and you will see a link to the full project from start to finish. We're even shown how to make a water fall, and water lilies. I loved it so much.I copied all the text and pictures and printed it out. It's a GREAT step by step tutorial.

Garnette in Lewisburg, PA


Paper Source: Picture framing shops are a great source for sheets of matboard and foamcore and are often more than happy to save their scraps for you, what goes in their trash could bring tears to your eyes....."one man's trash is another man's treasure".

Joann Swanson


Previous 10 | Next 10


Page 725 of 1032.

Total links in database: 10312.



Search for:


Browse the database (all entries)