Doilies: I got my mini doilies for free. When you go to www.cottonridge.com you click on miniature scale and gallery after, at the bottom of the picture you will see the offer for different gifts if you send them a picture of your minis. There is 6 laser cut mini doilies. It took 2 weeks for me to get it and they are beautiful.

Gisèle


Grass: I think I may have come upon a method of making grass. This trial is in the very early (initial) stages of development so I will just toss it out to all who wish to try. I have been reading on the lists about where, how, and what, of grass. Here is what I have done today, like 10 minutes ago. Using my razor saw and a piece of terry cloth rag, I cut a piece out to work on. I held the piece of terry cloth (with the terry side up) over a chunk of 2 x 4. The piece of wood was small enough to fit in my hand. I "combed" the terry with the business end of the razor saw and I saw that I was tearing apart the loops of the terry cloth weave and the threads were standing up. I took some handy (remember this is all experimental) green acrylic paint and daubed it onto the "raised terry.". I dipped the brush into water and daubed some more to get the green acrylic to run down to the base cloth of the terry. I then used the razor saw to "tease" the cut loops. By tease, I refer to the beauty shop or home method of teasing hair. This raises the nap after the paint has flattened it down.

Bob


Topiary: To make a topiary tree, you can use the seedpods of a plane tree (New Zealand). They are woody round pods with bits sticking out and holes in them. Glue on a stick and paint them green. When the paint is still wet,roll through dried parsley crumbs. When dry, you can glue some little red or orange beads on it for color. Plant in a nice pot or in your garden.

Dorothee


Topiary leaves: I saw a post mentioning parsley leaves for finishing topiaries. I have done that and would like to comment on my experience. The parsley leaves turned white-ish over time. I would recommend painting them.I am frequently tempted to use natural stuff, but I am more comfortable, if it's something I want to be sure is around a LONG time, if I only use the natural article as a base. Flower stems or small branches can be painted with white glue/paint mixtures to make trees with a bark-like look. Greenery is spray painted and sprayed again with small bursts or brushed with varying shades for realism and depth. (Use darker colors at the bottom/inside.) Dried weed heads are daubed with layers of paint in flower colors. It 'seals' up the parts that bugs might like, gives the brittle dry parts strength and some flexibility, and the colors won't fade over time. And it does not give off that strong smell some preservatives do when you buy at the craft/florist shops.

Janine


Turntable: In response to your conversation about the Zero Clearance Turntable, you can contact the owner Ed Given at ZCTABLE@aol.com or 1-800-523-4142. His web site is http://www.netresultz.com/miniatures. He is located in Melbourne, FL. I recently picked up the 42 in. lg x 24 in. deep (medium) turntable from him. I have not set it up yet, but the quality of the product appears to be excellent. I am anxious to try it out. He also has a 36 in. lg x 20 in. deep (small) and a 48 in. lg. by 30 in. deep (large).

Sandy


Gift Bag Scenes: I have come across directions for making a gift bag room box. Go to the http://www.MyMiniatures.com web page, choose the 'Projects' category. The site is called 'DIY's by Roz'. I believe it's on the second page.

Linda Kelley


Scale: I have this wonderful height Chart that I found in an OLD magazine. It tells you in a scale type of format how high things are in your mini house = 1 inch scale.

7 ft = ceiling
6'8" = Standard Door Height
6 ft = Highest Shelf
5 ft = Mirror
4 ft = Wall Switch
45" = Push Bars
40 - 43 " = Counter for standing man
38 " = Door Knobs
3 ft = Work bench, sink rim, counter
34" Hand rail - stairs
27-29" = Table Height, Stool Height
26" = Minimum knee clearance, man
2 ft. = Min knee clearance, woman
16-18" = seat height
1 ft = foot stool
7" = stair riser
4" = toe space beneath counters.

I'm sure you can add to this. I find this little chart very helpful. ½ inchers, can just halve those and be secure.

Judie - Daytona Beach, FL


Scale: One way to make a true scaled down replica of something is to measure and reduce. I find working in metrics helps for this because I can just get out the calculator, I can do - - 500mm / 12 = 41.7mm but 18 3/4" / 12 leaves me cold. Another way is to get a scale ruler (or an architects ruler) it has the full size measurements marked on it - but in the right position for scale. A "no measure" way of getting close to scale is to compare to something that is in scale. Find a doll that is in scale, or a picture of a person that is in scale and compare the thing you are making to the doll. This is especially useful for things you can't measure easily and have a bit of natural variance.

Sandra in New Zealand


Velvet Paper: I've had numerous requests for the location of the velvet paper I mentioned for printing rugs. I bought mine at a Scrapbooking store. That's all they carry, paper, punches, stamps, etc. BUT..........the site below has what they call Fuzzy paper for printing fuzzy photos. Can't for the life of me figure why you'd want a fuzzy photo, don't we all try to get clear photos? Anyhow, I think this is what you need. Price is 15 sheets for 10.00. What I found in the store was 1.75 per sheet, so........sounds good. When you go to the site, type in Velvet paper and search. It takes you to the Fuzzy place. Click on that and there you are. Have fun. http://www.paper-paper.com/home-details.html

Fannye in TX


Holding Small Items: Buy a bag of wooden golf tees (very inexpensive). Take a pine board (1 X 6 about 12 inches long). Drill rows of holes (the same diameter as the point of the "T" about 1-1/2" apart almost all the way through. I prefer Fun Tak or Blue Tak as it doesn't leave a residue like the wax to attach the item to the top of the golf tee. Hold the tee while your working and stick in a hole to dry. If your working with REALLY small things, I take the tees to my belt sander and make the head of the tee smaller, even down to 1/8 inch in diameter.

Ruth, Grass Valley, CA


Previous 10 | Next 10


Page 728 of 1032.

Total links in database: 10312.



Search for:


Browse the database (all entries)