Room Theme List: I don't know if this was the site but there are some roombox ideas here: http://www.bcminiatures.com/Lists.html Marsha, Newark, CA |
Fall Projects - Corn Husks Continued: Wanted to tell you that when I tried to shred corn husks, in the green stage, they were a little clumpy. I used a ribbon shredder as you may remember. Looked like a nice beginning for a hula skirt though, Norieta in Hawaii. Don't shred the first inch of the bottom of the husk, then pull the rest through, and put on the Hawaiian music. (Always clean out the shredder, it rusts). When I shredded in a semi green stage it was a little smother. I weighted down one side of the strands, but not the other side, which turned out rather wavy. They are still slightly green. When I shredded even dryer husks, things started tearing and breaking. So now I'll wait for the slightly green shreds to completely dry and try to remember to tell you the outcome. Sorry if this is too lengthy. MAP in Puyallup |
Acorn Cap Uses: glue on a little handle made of raffia or a small bit of vine and an acorn cap makes a rustic little basket. You may have to file off the underside a little to make it set flat. I put them in a scene with woodland fairies, filled with seeds and holly berries. SUSAN AT THE WHITE RABBIT'S HOUSE |
Stuffing pillows: When I made pillows for my dh I used cotton balls like you get to clean your nail polish off. They are perfect in size, especially for round pillows. Grace Shaw |
Stuffing for pillow cases and mattresses etc. Old method. Use the lint from the drier. Dr Bob |
Stuffing pillows: Once-upon-a-time I ordered a wonderful, one room cabin (already constructed-chinking between logs and all, very authentic looking) that I was going to complete for an old mountain man and his young bride. (both are Cat Wingler dolls who are living elsewhere waiting on this cabin) Anyway I wanted the bed and pillow especially to look pretty beat up and I knew that once completed I was not going to ever change it, so I stuffed an old pillow case I made and aged with the paper mache stuff (sculptemold/celuclay, etc ) and wet it real good and shaped it like I wanted. When it was dry it had the look of a very well worn and slept on pillow Jane Ratcliffe |
Beach house: Our mini club had a project and we all made beach houses and they are fun. Most houses were built up on 1"dows - about 9 to support--about 2" high. The cottages had a main floor that we all divided differently to have sitting, kitchen, dining and tiny bath area. The loft above can be simple just for sleeping. There was a porch with beach type chairs and under the house we had sand, surf boards, inner tubes etc. Hope this helps. Ruth Morey |
Beach Scene: I haven't done it myself, but have seen it done. In my Venus Dodge needlecraft book there is a couple of beach scenes. They used a lovely ocean backdrop, with a sandy foreground. One of the scenes had a Victorian couple dressed up in knitted bathing suits, and the next had a more modern mom and a baby out on the beach. Kim Bulbeck |
Beach Scene: I made a mini beach scene in an old fish aquarium. I placed blue sky railroad background paper on the back wall and left the rest of the sides clear....filled the bottom with sand (pulling some of the sand up the bottom of the back wall for effect) and voila! Everyone who sees it loves it. Ron's in Orlando has figures for the beach scene and they are comical........as well as inexpensive. You can probably find them elsewhere as I have seen them in many other places (even in a store in Dublin, Ireland.) Betty |
Ocean: Had we met earlier, we would have discussed using a different base for your set. Alas, and alack - what's done is done so let's use it! I suggest sealing the area of your foamcore, designated to be your ocean with one of the following: Durham's Putty (local hardware store), Hydrostone or Hydrocal (hobby shop). Less is more in this instance, you want as thin a coat as possible. You don't want to add weight, just seal. I usually add some fine sand to a set at this point. One of my favorite tricks is to squiggle thin streams of white glue in rows (the way sand shifts in the tide) then cover it with white sand, add a starfish and tiny shells near the shore, etc. I would use acrylic paint diluted with water (a wash) to lay several rows of color simulating the movement of the water with the waves. The wash is translucent and will allow the color beneath it to show through. Just random wavy lines of color following the roll of the water as it approaches the shore. This creates the illusion of incredible depth in your sea. Take your time and have fun. If you reallllllllly want to get into your water, pour your resin in a very thin coat. When it sets, add a few more tiny lines of acrylic wash to a few areas. Pour another coat of thin resin. Repeat as often as you desire. Becky |
| Previous 10 | Next 10 Page 729 of 1032. Total links in database: 10312. |
|
Browse the database (all entries) |