Lettering on fuzzy ribbon - I did try the rub on letters myself some years ago and wasn't happy with the result. I know in Australia we can buy sheets of iron on felt that you can cut shapes out of and iron on but that would be too thick. The only success I had was to cut a silk screen - a really tiny one - and screen print with fabric paint (thick fabric paint). I did print with a white glue first to seal the ribbon and that worked. Maybe you could paint with white glue or similar then try your white paint. Good Luck.. Trace |
Carpeting: I have used washcloths or terry toweling for "shag" type carpet in rooms with a 60s theme, also I did a handmade stenciled rug using a fine velvety textured hand towel, trimming each end and fringing, to get an approximate copy of a real-size rug in a replica room. It worked for me. Susan at WRH |
Scale Reduction of Images From Web: I use a far less technical way of reducing the tiles - I "copy" from the site and then paste into my wordprocessing document (I use Word 97). One the picture appears - click on it - and it should be surrounded by a black box with dots at certain points. Put your cursor over the lower right hand side dot and click and hold and drag the dot up towards the top left hand corner. This makes the tile smaller - of course you click and drag downwards if you want to make anything bigger. As the tile measurements were given, it makes it quite easy to hold a ruler up against the screen to see whether a "six inch" tile has become "half an inch" in miniature. Jan in Melbourne, Australia |
Moving Dollhouses: Seven years ago we moved from Denver to Knoxville and we moved four completed dollhouses, one huge dollhouse shell and many roomboxes. The only tragedy was a stair rail that was wiped out by a bathtub I thought was glued tight. I took everything out of the rooms and wrapped most things in paper towels and then in shoe boxes by room and then packed those boxes in a bigger box by house. Paper towels are soft and I used them later for cleaning when we moved in. My DH did the actual boxing of the houses, using big packing boxes when we could, but creating a couple of the larger ones. Padding is everything! We padded with newspapers, bubble wrap, extra bath towels and anything else that took up space. Be sure the boxes are sturdy! We also followed those movers like shadows to make sure nothing huge was loaded on top of a dollhouse. We moved our house, my mother-in-law's house and my '87 Fiero, packed with houseplants, in that van and nothing was lost or damaged. Linda Peterson in TN |
Screw Eyes: The nearest I've found to 1/12 scale screw eyes are model railway accessories called eye bolts. They don't have a screw thread, and have to be super glued into a hole drilled with a #80 bit (the smallest in most drill sets, thinner than most needles). The 'eye' part is about 1/32 of an inch across. They are silver-colored (stainless steel perhaps?) They come in two lengths, about 3/16" and about 5/16" long, and they are parts numbers SA 2206 and SA 2222 respectively of a line made by Detail Associates, P.O. Bos 5357, San Luis Obispo, CA 93403. A good model railroad store should have them, in the HO scale section. Frances Armstrong, Erin, Ontario |
Screw Eyes: All you need is the fine brass wire that most craft places sell. 28 gauge would be good, or even 30, if you want really small 'screws'. Cut the wire into 1-1/2" or so pieces, fold in half over a thin rod, (this will establish the diameter of the 'eye') and then spread the two tails and start turning the rod, to twist the two ends. After a number of turns, you'll have a nice 'threaded' stem, and the two tails sticking out, trim them off to the length 'screw' you wanted, and you've got a tiny screw eye. I make them to hold the stair rods for the stair runners I weave, and if the drilled hole is just right, they really do 'screw' into the wood. I use 1/16" brass rod, available from some mini stores and most train stores, but anything from the tip of some ball point pen tips, or the tapered end of a toothpick would do. The 1-1/2" starting length is excessive, it just gives you something more to hold onto while you twist, and you're probably wasting 1/100 of a cent's worth of wire. Bonni Backe in Jersey City, NJ |
Holes in Plastic: If you ever want a whole in plastic again. Here is a tip I found. Get a burning candle & a ice pick. Hold the ice pick over the flame until it is hot. Then press the ice pick on the place where you want the hole to be. Keep doing this until it goes all the way through. It works & won't break the plastic. I know I have done it. Granny Debbie |
Checking Scale: To make sure goodies found by accident are in scale: Get a child, a baby and an adult of each of your favorite scales. They can be cheapies or borrowed, just so they're in scale. Get the plainest clothes possible or undress them if you can. Put them face down on a copier, all of one scale on a page. Make copies for each car and your purse, so that you will always have them with you. They take up very little room and can be brought out with a thin 6" ruler when you want to see if something "fits" in the scale. Rebecca in Texas |
Bending Metal Tubing: I purchased a mini tube/wire bender at a train type hobby shop. It is made by K&S, the company that makes a lot of the metal supplies for modeling. It is called a Mini Wire Bender - Stock No. 323. I think a hobby store could get one for you or you might be able to find K&S online. And you don't even need to hold the tubing in hot coals to use it! Chris in Minnesota |
Bending Metal Tubing: Another idea might be to fill the tube with sand; again, it would in effect be a solid rod, rather than a tube. This is an old moon-shiner maker's trick - and never mind how I know! Dani, Bradshaw |
| Previous 10 | Next 10 Page 730 of 1032. Total links in database: 10312. |
|
Browse the database (all entries) |