Pampas Grass: To whomever was looking for Pampas grass, I just received my Cabela's catalog (free from http://www.cabelas.com and on page 63 in the top left hand corner are some great, very fine feathers (Metz Necks and saddles) that I think would make nice flower heads for your pampas. They even have white which could be used as is, or dyed. This catalog has a lot of strange and interesting things used for making fishing flies, but there seems to be a lot with miniature applications. Susan from St. Croix |
Waterfalls: Make your second pond just like your first one. Make sure your water path for the water fall is painted, then use some clear tape as a guide for the waterfall. 50 year Clear Silicone makes good falling water, it can also be highlighted with white paint after it dries. Just apply it directly over the clear tape. If all else fails, go to your local bookstore and sneak a look at a model railroad how-to book. I have made several waterfalls this way and they all turned out well. You can go to either my web site or photopoint and look at Akademia- A wizards' college for examples of finished waterfalls. http://purefantasy.centramedia.com Shaun Crawford |
Waterfall, Creek and Landscaping: Someone posted a question about landscaping and waterfalls/creeks and how to do them. I did a similar type treatment to the landscaping on my log cabin and used foam for the basic shapes but then used a model railroader trick of crumpling newspaper and hydrocal cement (or plaster Paris) to firm up the shape I wanted. The waterfall started with the one that Nivica sells but I built up the rock formation around it and made the suggestion of a creek with foam. Then I sealed the foam and painted the bed of the creek. I then filled the creek bed with real dirt from the creek bed from Colorado, as well as with tiny rocks and pebbles I'd picked up from vacation. I filled any gaps with natural colored aquarium rocks and then poured Envirotex to simulate the creek. I was terrified to do a water treatment like this one, but it turned out to be really easy and fun to do. Kathy in TX |
Rocks: The best way I have found to make rocks is a mixture of plaster, water and glue. Mix together (not too much at a time as it sets quickly). Place a spoonful onto a plastic surface. You now have a rock. Paint when dry. I tried mixing the paint into the mixture but it didn't look as realistic. I used these for a pond I made- they look great. Karen from Dubai |
Witch's cottage: I just finished "Witch Hazel's",a wonderful establishment built in Froggy Bottom Swamp. I used sheet Styrofoam for the base. It can be carved, sanded, and coated with spackle or plaster. I use plain old Elmer's glue and toothpicks to hold my basic rock designs together until the glue dries. Test other glues before you use them, many glues will eat the Styrofoam. Then the rocks are basecoated with either plaster or spackle. I like wattle and daub myself, but did my structure in a stucco style. The swamp water was made with 50 Year Clear Silicone, although I usually use Envirotek . A word of caution using Styrofoam. If you are using an electric Styrofoam cutter, the fumes emitted are poisonous. The same would go for using a heat gun. I use both tools, but always make sure I have plenty of ventilation. Most people who know me don't think I do though ;-)- "Brain damage already". Shaun |
Witches Cottage: For sedimentary, layered rock formations, why not bust up and use some old acoustic ceiling tiles? They break up easily with edges presenting rugged, natural shapes and glue easily to build up as high as you want. Mostly vertical or receding layers but also some points of overhangs. Spray with varying yellow & brown rock tones of Rit dye in the spray bottles normally used for glass cleaner and such. Seal with clear varnish and sprinkle with Woodland Scenics dark green ground foam for patches of moss. Add very minimal bits of lighter green on some edges as new growth. If you put trees or shrubs on top, don't forget to have a few gnarly roots exposed in the rocks by erosion. Just the tiniest glint of gold sparkle deep in one crevice may give a few viewers a small, individual discovery. |
Witches Cottage: For sedimentary, layered rock formations, why not bust up and use some old acoustic ceiling tiles? They break up easily with edges presenting rugged, natural shapes and glue easily to build up as high as you want, having mostly vertical or receding layers but also some points of overhang. Spray with varying yellow and brown rock tones of Rit dye in the spray bottles normally used for glass cleaner and such. Seal with clear varnish and sprinkle with Woodland Scenics Dark Green Ground Foam for patches of moss. Add very minimal bits of lighter green on some edges as new growth. If you put trees or shrubs on top, don't forget to have a few gnarly roots exposed in the rocks by erosion. Just the tiniest glint of gold sparkle deep in one crevice may give a few viewers a small, individual discovery. Mel Koplin, Las Vegas NV |
Ceiling tiles: I used to do trains, and ceiling tiles are great- you can get a super effect of rock striations by stacking the tiles unevenly and then use a wire brush on the edges. But wear a paint mask! The dust from those things can kill ya. Linda in NC |
Water- Polyseamseal is a self-leveling CLEAR 50 Yr Caulk. It makes wonderful waterfalls, streams etc. I use this in all my classes and it is fool proof. No mixing, and non toxic fumes, very little odor. If you cannot find it locally, I have it on my website. http://ladybug-fairies.com LadyBug, Sue Thwaite |
Underwater Look: It sounds like you are trying to create the surface of the water from underneath...sounds like an interesting problem. Two ways I thought of were: Ana Gerard |
| Previous 10 | Next 10 Page 732 of 1032. Total links in database: 10312. |
|
Browse the database (all entries) |