Ponds: I have been making pools and ponds under glass domes for a while now, and the people that have them say they prefer the ones I do with a sandy bottom and clear water. They can see the tiny rocks on the bottom and the fish and even the roots of the lilies or whatever plants I put in. I put a very thin coat of glue around the bottom half of the wall and part of the bottom and sprinkle on the green railroad "grass" and then shake off the excess. That gives the look of algae around the bottom. I use natural little stones laying around haphazardly and sometimes piled together and put the fish in and among them for more realism. If you have no source for the grass, you can just paint the bottom of the wall and edges of the bottom with a wash of green acrylic. I use preserved plants a lot, take the smallest leaves, etc. I sometimes use purple strawflowers(dyed ones) for the lilies and I float a dead piece of leaf on the surface sometimes. For water I use Envirotex Lite, which is a two part resin polymer coating. I buy it at any craft shop and even hardware stores. If you can't find that brand, just look for the poly coatings that say "1 layer equals 50 coats of varnish". I pour it in layers, adding little things in each layer so you can see the depth of the water. Make sure you cover it with a box or something till it cures to keep dust off. For anyone interested, for the basic pool, I buy a round white foam circle about 8" across and 1" deep. I cut a rough shape out of the center(the pool) and leave a border around the edge for landscaping. I glue this donut shape to a sheet of foil. I run a line of thick tacky glue around the inside bottom edge, gluing the hole to the foil. I also run a line of it around the outside bottom edge. This seals the hole for the resin later. I then use my fingers and smash the top edges of the ring to slope them. I use the part I cut out of the center by breaking it up and piling "boulders" up on part of the ring. When this is all done I spray the whole thing with waterbased "granite" spray paint. When people pick up the finished pool, they are amazed that it isn't heavy. I add real stones or pieces of wood etc. to finish the top and then landscape with plants and flowers. I usually put on at least a banana tree, weeping willow, or plumeria tree for shade over the pool. Each one is different and each one is unique. They are a joy to make and a pleasure to show. Norieta |
Polymer Compound Resin - a 2-bottle kit - one is your resin, the other your catalyst. These must be mixed one part to one part, VERY ACCURATELY AND STIRRED THOROUGHLY. I was told that you should have two separate containers for measuring. Fill one container with one compound... and a second container with the second compound... then pour them both into a third container, and stir thoroughly. That makes a much more accurate measurement. Little containers with "measuring lines" especially for resin can be purchased at most hobby shops. Viola |
Expanding foam: If you want to use expanding foam for rocks and such... there are 3 levels of expansion available. You probably should use the least expanding one. The one I read about at the end of Digest# 102 would have been the greatest expanding one. We have used it for many purposes (none in mini yet). Ann in AZ |
Insulating spray foam: Several people have mentioned using the insulating spray foam for rocks and other landscaping. Please bear in mind that the stuff expands beyond all expectations when it comes out of the can. Think hair mousse. A little dab'll do ya, and all that. My DH and I used it to seal cracks in the stucco on our front porch, and after we squirted it into the holes, it expanded right back out, and we had a bunch of rude little tongues sticking out at us, all over the place. Insulating spray foam: Yes, you do have to be careful with the stuff but you can cut it and trim it when it dries if it expands more than you planned. Roz |
Insulating spray foam: Rocks: I have used the foam insulation product that DAP puts out to seal cracks, gaps and openings in your home. It is easy to use and is paintable. I spread aluminum foil on my table and sprayed out very small amounts of the foam (it expands ) on the foil and let dry. You can build on a piece by spraying irregular areas of foam on the small pieces you made the day before. You can also sand, cut, beat with a mallet or use whatever you think of to reshape once it is set up. It is flammable so do not try to use heat on it. This method has worked for my son on train scenes that he has built in the past. I have also used it to make boulders for fairies to sit on. Dottie (Florida) |
Waterfalls: I have found that for big waterfalls, clear postage tape works great, it's either 1-1/2" or 2" across. Saran wrap is another alternative. Shaun C |
Pond: Just had to write and tell you that, after thinking for a while about making a pond, I finally took the plunge!( no pun intended). I bought a box of Sculpey and went to work. I ended up with a pond 8-1/2 X 7 inches. I carved small rocks the whole way around the pond, with one large rock on one side that extends into the water. I then started painting. I bought a jar of Sandstone at Michael's in tweed color that I used for the rocks. I painted the cracks in-between with a dark brown. I then added a glaze over that. I painted the bottom of the pond "blue lagoon". I made a gold fish, lily pads, lily, and cattails out of Cernit as well as leaves out of florists tape. Kathy, Rural PA |
Snow: I made the dollhouse I bought from Joann's Fabrics into a Santa House. It not only has snow on the roof but has a snow covered base. I used Bondex Premixed Lightweight Spackling and then dusted it lightly with glitter. I also used "real" size spray snow and stood a distance away and lightly sprayed the house and scene. I think it took some of the starkness of the red away too. Juanita in Missouri |
Landscaping: I will be glad to help with the landscaping if you wish. One thing I would suggest is that you make what I call "Instant Gardens.". These are little plots of land that you can put flowers, bushes etc. in, then put them wherever you wish. Some should be strips too, to go next to the house. These 'gardens' are made with irregular shapes cut from balsa wood and then painted brown. Using balsa allows you to just stick a pin in where the flower (or whatever) is to go. No need for drilling holes. Dawnsminis |
Instant Gardens- How To: Even though I make individual flowers and plants for sale, I know a lot of you like to do your own thing....this will get you started: "INSTANT GARDENS" These are just basic instructions...use your own imagination... Say you take a piece of balsa 3" wide and at least 3/8 or 1/4" thick. Draw a random pattern (say a figure 8) then cut out with an Xacto knife. Take the knife and slope all sides, then smooth with an emery board. Paint the wood on all sides with brown paint. Where you want to put a flower, drill a hole with a pin, a nail, an awl, whatever you have on hand. Using a tacky glue, insert flower. When flowers are all in, attach any greenery you think suitable for that flower...glue to wood, flower or wherever it will attach. If you wish to also add a bush, take two stronger stems of the bush material and insert as you did flowers. Then add more of bush material by using tacky glue to original material to fill it out. With the flowers and bush in place, you could add a rock or two. Now take a white glue (such as Elmer's) and a cheap paintbrush. (I usually cut the brush down a bit and then just throw out afterwards) Taking one section at a time, liberally spread the glue in and around flowers, bush or rock. Now take a piece of wax paper and fold it one way, then fold it the opposite way. (Makes a crease to later use to empty excess.) Holding garden over wax paper, use the fine dirt or mulch (found in Model RR stores for example) and sprinkle it over the glue, then tap excess off onto wax paper. Continue doing this until the entire garden has been covered, then pour excess back into package it came in. By bending the flowers etc. one way and then the other, you can easily get to all areas. Don't forget to do the edges. Let set. If you have at least an inch of space around the dollhouse, use a straight piece of balsa about that width and then by using the same method you will have foundation plantings. When satisfied, just glue in place. Dawnsminis |
| Previous 10 | Next 10 Page 733 of 1032. Total links in database: 10312. |
|
Browse the database (all entries) |