Storing / Organizing Stripwood: I store my stripwood vertically in a draftsman's cardboard box that I bought at a business store. it has about 25 compartments for standing maps in and is perfect for the job. I think that wood will eventually warp a bit even if it is stored lying down.

Roz


Wood Storage / Organization: I keep a good deal of wood around. For my stripwood I have a Housework's display box that has holes already cut out, but a liquor box or similar with dividers works too. I cut down some oatmeal boxes for some compartments, others have paper towels cores. All the like pieces are grouped together. For those small pieces I have a juice can on my work desk to hold the assorted pieces.

Beth


Non-sticking labels: I had the same problems with labels not sticking to plastic drawers, or else sticking so permanently I couldn't blow-torch them off. My daughter-in-law gave me a box of her outdated business cards. Full size or cut to fit, these are great to use for labels to tuck just inside smaller clear plastic boxes or drawers.

Those business cards are also ideal for many other miniature uses. Good backing for posters, paintings, wall plaques. Make excellent small boxes, using a pattern to score and fold, or round containers by rolling a pen or dowel over the card to make it curl. I've made birdhouses and shingles and 1/4 inch furniture; also used them for reinforcing printables that needed a bit more weight. They make good glue spreaders, too.

Wanna


Saving scraps: This is a little tip for beginners and anyone else that is building a slot and tab dollhouse.  I have had mine under construction for a number of years and a few moves (waffling about the wiring) and in the process managed to misplace the dormer roofs.  Tried to measure and cut new ones and there was too big a gap between dormer roof and main roof as I had to cut it on an angle.  Was looking through the box the other day and looking at parts I had not popped out yet when I realized I had the outline/pattern from the dormer roofs right there in the scrap pieces that I, as a life time member in packrat anonymous, did not throw away.   I just laid that on a new piece of wood traced it and cut it out.  Much better fit.  So it pays to keep the outline of parts you used even if you finish the house in case you ever need to replace it.

Elizabeth Cooper


Stove burners: If you have a scanner you could scan in the Sears picture and resize it to fit your stove. However, that would still leave you with a VERY flat top. If it is a gas stove you want, first draw a black 'o' where the burner will go. Then take a length of the tiniest square rod you can find and paint it black, cut short lengths and glue them in a star-burst pattern over each burner._\l/_ On my stove, the diagonal spokes are /l\ shorter than the vertical and horizontal ones. For knobs, you could use large beads topped with smaller ones.

Dani


Labels - Purchase plastic self-stick business card pockets (any office supply store, Office Depot, etc.). Then you can change the label anytime you like without removing the pocket for you only have to replace the card label that you have slipped inside.

Marilyn


Organizational tips: Here are a few of my organizing tips, some original, some gleaned from who-knows-where, to add to yours.

1) Watch for daily- and weekly-dosage medicine/pill holders in drugstores and dollar stores. I found clear plastic snap-lidded boxes, with seven tiny daily boxes inside, very cheap. Excellent

for tiny beads and jewelry findings. Also found a handled tool designed to open difficult medicine bottle caps in the same bin, 99 cents. It's perfect to pry open caps on paint bottles and lids on cans.

2) I have a row of those fold-together cardboard boxes in a pretty rose print on the top shelf for things I don't use often and don't need to see into. Rather than mess up the box with a stick-on label, I just take a sheet of paper, fold it in half and hang it over the edge of the box, leaving enough room to write the label so it will show with the lid on. The lid holds it in place.

3) My husband made me a workbench from a piece of Formica kitchen counter top, which cost about $12, with four screw-on legs. Practically impervious to paint or stains, and not as deep as my previous one, which was an old hollow core door, it's still deep enough for a row of those multi-drawer organizer boxes across the back. Under it is a large popcorn can which holds rolls of wallpaper and wood strips in cardboard tubes, as well as a small rolling cart which once held an old Atari game, and a small 3-drawer night stand, formerly our son's. The cart holds all my 1/4" stuff and the night stand's drawers hold tools, paper cutters, mitre boxes, etc. The workbench legs are set far enough back that I can roll easily up to it in my chair and not have my knees press against the night stand.

4) On my workbench I keep one of those self-healing cutting mats at my work area. On the right side I have a small sleeve board, with my iron on it, and a multiple outlet surge protector is screwed onto the table's end, into which I plug the iron and my magnifying light, and other electrical tools as I need them. I also keep a round kitchen turntable, the kind that rotates on ball bearings, close by. (These can often be found at secondhand stores, dollar stores, and garage sales, as well as regular housewares stores.) I place a tall heavy paint or even food can, with a dab of wax or stickum on top, in the center. When I'm making a flower arrangement I press down the small vase or basket or other container firmly and the wax or stickum holds it in place. This allows me to work closer to eye level, rotating as needed. Tools or materials are accessible placed around the can. If I want to work on a different project before that one is finished, I just set the turntable (can, materials and all) somewhere else until I can come back to it.

5) I also cut one-third off rolls of paper towels, foil, and wax paper, using a heavy knife, rotating the roll as I cut. These three small rolls I thread onto an inexpensive paper towel holder from the Dollar Store. The longer portions of the rolls, replaced in their boxes, still work fine in the kitchen. Another inexpensive wooden paper towel holder holds rolls of cellophane tape, floral tape, masking tape, ribbon and some of my small tools.

Wanna


Owl pellets: My child 's third grade class dissected owl pellets and found all sorts of bones.  If you contact an elem. teacher, she can tell you where to buy them or she may the leftovers you can have.

Jennie


Thicker Leather: I read that for thicker leather you can turn it over to the "fluffy" side and attack it with sandpaper, thus reducing the layers at the back - and hence some of the thickness.  Whilst I have some thicker leather at home, I still haven't got around to trying this, but it certainly sounds feasible - and if you can't use the pieces as they are it is well worth a try.

Jan


Wood storage: I use cut sections of 1 1/2 inch PVC drain pipe to store picture frame moldings. They are strapped horizontally under my bench. I band the short pieces together and keep them in the front. I store turning squares, 1/8" square to 3/8" square in the same type pipe mounted vertically to the wall along with some strip wood, metal bars and pieces of dowel. We store dowels in horizontal lengths of down spout attached to the wall which is an idea that came from somebody's posting on another list. The lumber I resaw is usually 2 to 4 1/2 inches wide and is cut 2 feet long. I band it in packs of ten and keep it horizontally in the big drawer of an old drafting table. Lumber rarely bows from being stored vertically if banded together.

Jane Staples was in our class at Ft. Lauderdale and does fantastic painting.Take a look at the site. As I recall, Jane's favorite subjects are horses. Really excellent work. http://tor-pw1.attcanada.ca/~jstaples/

Pete Boorum


Previous 10 | Next 10


Page 743 of 1032.

Total links in database: 10312.



Search for:


Browse the database (all entries)