TRANSLATIONS - Helen of York had a problem with Dutch Instructions, somebody else with the NOCH site, and ME with a faxed order, having a question and not being able to fax back in FRENCH.   Well...here is the answer - http://www.babelfish.com/

You type in your message and then click on the language you need to communicate with -  I have found this to be such a blessing.

Mary Eccher


Ponds: I took a piece of cardboard box and cut it to the size and shape that I wanted my free-form pond to be. Then I used aquarium sealer and spackle and covered the cardboard and built up the edges to the height and shape I wanted and then I let it dry, I painted it dark grey-green and let it dry. I then poured in the resin and as that was drying I put in the plants and fish. I made the koi from fimo and the resin didn't hurt them at all. I used painted masking tape for the cattail leaves (wire stems and the reconstituted bread dough tops which I made about twenty years ago). I added water lily leaves and flowers last as the top was just dry.

Carol


TRANSLATIONS - This is where I ended up

http://babelfish.altavista.digital.com/translate.dyn

Makeminis


TRANSLATIONS: Another translation site I like is:

http://www.translationwave.com/

Noëlla


A tip to raise mini money: We had our Mini Club Christmas Party on Sunday and the gal in charge of videos ran a raffle to raise money to buy more. BUT not quite like an ordinary raffle! The tickets were quite big and one ticket was $2 but for $5 you got a strip of tickets that reached from your shoulder seam to the finger tips. Longer arms got more tickets. I only measured for 14. With a gimmick like this no-one bought just one and $115 was raised from 25 people.

Pat Morrison


50's kitchen: My favorite 50's kitchen was the usual. I painted the walls pale mustardy yellow and inside the cupboards I painted the turquoise! Really, inside. Of course the wall oven and cook top and sink were all turquoise. The floor was that inlaid linoleum that looked like small squares of brick. Loved that floor and I think it is still manufactured.

And yes, the Westinghouse roaster oven. Actually quite a lifesaver for me. Got mine in Japan, at the PX and it worked as my only method for cooking for my family of 5.

Earlene Lane


Don't let your sons throw away the scraps from their model cars and planes. The burrs might even be a faucet!

Marcie Cumberland


50'S FRIDGE/Stove: Haven't read a post yet about the fridge with the Y shaped handle. You could open it from either side, depending on which way you pushed the handle. My parents still have one in their backyard bungalow they rent out, AND IT STILL WORKS! We used to have to clean the house for the next renter coming in and Mother said she would take all 4 of us girls back there to help. My job as the youngest was to push the handle to open it when someone needed a snack or drink. Mom said I used to tease my older sisters by opening it the opposite of the way they asked, I thought I was in full control back then!

Believe it or not I still use my Caloric stove that was in this house when I bought it. Not sure when it was made, but this house was built in early 50's and don't think the previous owners ever bought any replacements. It is gas, very wide and has a covered griddle in the middle. Also has two oven below, one regular size and the other vertical. Everything is still in working order but the vertical oven, which is now used for the storage of pans.

And YES, I still have the boomerang yellow counter tops, but was very fortunate to have wooden maple cabinets.

LISA L, MARTINSVILLE INDIANA


I've used Envirotex but tend to prefer the type called 'Castin Resin' - it is sold in metal cans at most craft stores. The catalyst comes in a small plastic bottle. This type of resin is more expensive, but the results can be achieved much faster than Envirotex, which can take several hours to harden/thicken up. It also takes a bit more practice, as the ratio of resin to catalyst is 1 ounce resin to 10 drops catalyst, but I just usually add a few more drops of catalyst to "cover the bases" and to speed up the process. It also has a stronger chemical odor but I just follow the "rules" and NEVER work with any resin unless in a well ventilated area.

Laura


Antiquing Silver Plastic Sleighs: Brush black or brown (or experiment with other colors--dark green would probably look great) acrylic paint into all the crevices of the sleighs, then wipe off with a rag. Leave more on to dull the finish, take more off to keep it shiny. Takes just a couple of minutes and dries fast.

Lee Menconi


Previous 10 | Next 10


Page 752 of 1032.

Total links in database: 10312.



Search for:


Browse the database (all entries)