Tubes for candy: How about fuel tubing for model airplanes? Available at model shops. Jeanne |
Glass Display Domes: I've seen glass domes with walnut bases in a variety of sizes at the Williamsburg Pottery. The cost was almost half of retail. Items are always changing, but I have seen them on numerous occasions. I believe I found them in the china dept., but I won't swear to it. Eileen Vernon |
Ivy: The ivy was very easy; I started with a couple greeting card envelopes in different shades of green. I then scribbled both sides of each with broad-tip markers, also different shades of green. I covered most of the paper, with some of the original paper color still showing. I was not picky about the colors, as long as there was some variation. I punched the scribbled paper with a tiny maple leaf punch and creased each one with the back (blunt edge) of an X-acto blade. The stems are fine cloth-covered floral wire painted dark green, cut into various lengths. I glued each leaf in place, let them dry, bent them into approximate shapes and glued them to the gourd. Since then I have made some more ivy in hanging flower pots, and I sponge painted the paper with various shades instead of using the markers. I liked the results better because I had better control over the color combos. Chris in Minnesota |
I stumbled onto a "gold" mine for my 1/4 mini water (ocean) scene. I wanted to make the shore line look real; in 1/4 scale no less. Made my sand dunes and dune grass but something was missing. The shells one usually finds along the shore. I went to the beach here (South Florida) but nothing was small enough. I was looking out the patio doors this AM and, since we are in a new development, I noticed that some of the instant landscaping was not put in as of yet. Now, South Florida is made of sand. This sand was deposited millennia ago. I took my little kiddy pail and went out the patio door. Got down on my hands and knees to examine the small bits of shell, etc., and lo and behold, there were my 1/4 scale shells. The neighbor came to the final conclusion that I was nuts because I was picking things out of the sand with a long tweezers while on my hands and knees, and depositing the things I picked up in this pink kiddy beach pail. The little clam shells and "drills" are now firmly glued to my shore line.. Moral "Seek and ye shall find." Dr. Bob...Delray Beach, FL. |
Ocean waves: I was making an ocean roombox and used GE Silicone Clear Sealant. IT is NOT CLEAR - it is opaque. So if you want to use it for ocean like I did, you can paint the surface it will be on and the color diffuses through the opacity of the "caulking" What I found so nice is that you can "work" the silicone by dipping your finger in plain, cheap isopropyl rubbing alcohol and smooth or spread or form the silicone as I did to make waves, or ripples. The alcohol also gives you plenty of time before the silicone starts to "cure". The clean up is simple as the alcohol wipes off any silicone that gets on yourself or tools. I do not know about how it cleans if you get the silicone on fabric. This is not as clear as the DAP Clear Caulking. I think that one can be finger worked with liquid detergent like Wisk or Joy. I have not used the liquid detergent with the DAP Clear Caulking. Back to the GE Silicone; If this stuff is soluble in alcohol, what are the possibilities of coloring it by mixing some color into the alcohol and then mixing the alcohol with the silicone? Just a thought. I gotta try that and let you people know what happens. Of course, if I blow up he house and me, its been a lot of fun knowing you all. Until next time;- ) Dr Bob...Delray Beach, FL |
Old man cactus: Not wishing to waste the green stems from plastic flowers, I made an old man cactus as follows: In a mini clay painted wooden pot, I put a piece of stem and then filled the pot with a mix of white glue and salt, centering the stem which was 1/2 inch above the salt line. After it dried, I pulled apart some cotton ball to make a thready drape, which I glued to the top of the stem, giving it the appearance of the hairy old man cactus. Jane in Arkansas |
Cactus needles: I once made some cacti and used bristles from a child's toothbrush. Worked great. I put them in the clay before I baked it and they didn't melt or turn and off-color. Marjorie in CA |
***GOURDS*** First off, let me recommend a great book on gourds- our library has it and maybe yours does as well- they also sell it online at Amazon and places like that. The book is Gourd Craft by Summit and Widess. It is one of the most comprehensive and best books I have seen on a craft- I don't often buy books, but this is one I got. Step 1 is scraping the gourds before you start to decorate. Gourds are naturally covered with a waxy epidermis that must be removed, and paint won't stick unless you take that waxy epidermis off. Just wrap them in a wet towel, put in a plastic bag overnight and the stuff will scrape off easily. I use and old paring knife (not serrated.) When I'm done, I also scrub them a bit with a green scotch brite kitchen scrubber. Draw your design of where you want to cut with pencil. If you use marker, it will bleed through any paint you put over it. When I am cutting intricate shapes, I use a Dremel tool with a mini saw blade shaped steel cutter. (This can be dangerous if you aren't careful!) For simpler cuts and the easiest way, you can use a hand held jig saw. Drill a hole to start and then cut, holding the gourd as steady as you are able. You can prop it on a wadded up towel or something to hold it in place. If at all possible, try to avoid cutting the gourd with an X-Acto knife - the gourds are very woody and hard and it will be difficult to cut them this way, in fact you may cut yourself instead. Then you need to clean the inside. I use a variety of tools to scrape the inside clean. Ceramic tools that look like a big loop on a handle and have a cutting edge work good and are inexpensive. You can also use a grapefruit spoon or whatever.... I finish with a steel wire brush chucked into my drill. *WEAR a dust mask!* The dust can be irritating and may contain mold that you might be allergic to. I like to paint the inside of the cleaned gourd with spray paint, but that is just personal preference. I paint the outside of mine with acrylics. I usually do a lot of sponge painting. I tried spray paints, but they don't hold up outside as well as the acrylics. Spray them with polyurethane or clear enamel when you are done. Some people prefer to use leather dyes or shoe polish to get a more natural finish instead of painting them. Bonnie Gibson - Tucson, Arizona |
Cactus needles: That nylon thread which is so annoying in your clothes makes good cactus needles. Just think how it sticks into your neck! It comes in clear, and smoky colors, but can be colored with permanent magic markers. Alice Zinn |
Tissue Box Covers: I made several of these covers for gifts for Christmas this year, and found that Double-thick Bainbridge Board (purchased at an artist's supply store) worked very well. You can cut it with a table saw and then just lightly sand the back edges because the table saw blade tears the paper in the back of the board. Of course you can't use regular wallpaper paste, because it will warp (as with foam core) so I used Wonder Under and ironed material and wallpaper onto the board...worked like a charm! Roz Weitzman in Toronto, CANADA |
| Previous 10 | Next 10 Page 758 of 1032. Total links in database: 10312. |
|
Browse the database (all entries) |