Resins: Warning for resin buyers/users - Envirotex and other two-part resins usually have a limited shelf life of 6 months. Anne Gerdes |
Fake Water: I found a new product at Michael's. Wonder Water. It is in an plastic bottle. You put it in a pan of warm water (tap water) for 10 min. It liquefies, you pour it and it resets. Amazing. I did have a problem with it staying liquid long enough to pour. It's like as soon as it hits the air it resets. But used in small amounts that's OK. If I were going to do a large something, I'd probably still use resin. No odor! No fumes! Fannye in TX |
Another good use for the small Lego blocks, is to use them to make a box for making a mold. You can pour plaster into the box and it does not leak, plus it scrapes right off the blocks. I don't know what would happen if you tried to pour resin in. Might be a disaster. But I know that plaster is okay. Joy Parker |
Envirotex: I get Envirotex at Michael's Craft store, but sometimes Wal-Mart or Kmart will have it. Also hardware or lumber stores carry it or a similar product. Ask for a 2-part resin. But not an epoxy resin. There must be an online source for it but am not sure where. Dorothy |
Waxed cord: Try looking for the cord at a bead supply house as it is used for jeweler making also. Charlean |
When we want to seal something so we can use liquid resin, we usually use either tacky glue, E6000 or silicone caulk. Tom Berkner |
Pond: I used a round coffee lid for the pond and cut down the edges to the depth I wanted. Painted the bottom of the lid a murky color, made Fimo fish and glued them in. I then cut a piece of acetate to fit the lid and used clear nail polish to give the surface a ripple effect. I then made rocks out of plaster ,glue and water and put them on a plastic bag to dry and then painted them. I then glued them around the edge to hide the edge of the acetate, then I cut out water lilies and made water lily flowers glued these onto the water and put plants in the crevices of the rocks. It looked great. The clear nail polish took away the flat look. Karen from Dubai |
Polyseamseal for Water: The stuff for water in a tube is Clear Polyseamseal and is great stuff. But, when I did my ocean shore, I used Liquid Illusion, because I needed quite a bit and the Polyseamseal takes a very long time to cure. Polyseamseal would, however, be great for making a rougher surface - you can use your finger or a spatula to make ripples, waves, etc. Guess I was just afraid the Polyseamseal wouldn't cure completely with such a large amount. Carole Pierce in TN |
Mini clubs: For a listing of clubs go to http://myminiatures.com/ Smallstuff Member |
Cat Wingler: Cat doesn't have a website that I know of, but her telephone in North Carolina as (336) 667-3934 Betty |
| Previous 10 | Next 10 Page 765 of 1032. Total links in database: 10312. |
|
Browse the database (all entries) |