Bead lamps: If you are interested in lamps and items made from beads and findings join the MSATMiniFindings@OneList.com (I know it is changing it's address but that one still works or e-mail Kathy Bracken at bracken@coolmini.com . They have lots of ideas for vases, lamps and lots more. Use earring posts for bases or filigree bead caps and if you can get big bead caps they can be used as shades. There is a site where you can see all the things that we make to show each other, there are also kits available with pictures and instructions. Roberta |
RESIN PROBLEMS: First of all, there are SEVERAL kinds of resin to use for water, beverages etc. You say that you received some miniatures that leaked (I would think you mean "oozed" out of the particular miniature) and some didn't. The products that you were sent were not done correctly. What I mean by this, is that the resin was not MIXED accurately or stirred correctly before being poured into the container, and therefore, did not harden. (Wish I knew what containers you mean). But here is what you really wanted to know: NO. you cannot salvage them by washing them, nothing can clean up a messy resin miniature, and don't even try. And NO.. you should not touch the sticky resin, not because you will be poisoned, but because care must be taken with ANY medium - glues, spray paint, etc. My suggestion is that you contact the people you purchased these miniatures from and tell them the problem you have had. If need be...send them back and SHOW them what happened. If you are tempted to create water in jars on your own, what you need is Polymer Compound Resin - a 2-bottle kit - one is your resin, the other your catalyst. These must be mixed one part to one part, VERY ACCURATELY AND STIRRED THOROUGHLY.] If you want to learn more about this resin, go to my Website, http://www.pannikins.com/ then to the second page, click on Mary's Menus Projects. There you will find a page on working with resins. This resin can also be purchased there, or at most craft shops and some miniature shops. Mary Eccher |
Ponds: (Compiled from hints given by Susan and Barb Plevan, as learned from workshops taught by Francis and Jacey Culham and Joanne Shimakawa, including their own innovations, plus tips gleaned from Sammy Smith, Denise Olson and Anne Gerdes). An easy liner for the pond bed is 2 layers of aluminum foil. Others use gesso or plumbers' putty. When your pond bed is ready to be painted, start with black spray paint. This will even work on the foil. Otherwise, the resin sometimes removes a bit of the acrylic paint and the shiny foil will show through. Next, paint the pond bed with several shades, starting with black in the very center, then brown, then lighter brown, ending up with moss green on the outer rim. This gives the illusion of depth. Before pouring in resin, glue tiny gravel, sand or shells in pond bottom. Allow glue to dry completely. Fill the pond 1/3 with resin with a tiny amount of brown resin dye. (If the resin is completely clear, it doesn't look real). Let the resin set up until it's pretty thick but not completely hard, then put in fish. Fimo fish can be painted with a very thin wash of metallic silver or gold paint to make them shine. Let resin set up completely. Now add more resin. More fish can be added to this level to add depth illusion. "Plant" waterlillies in the top level. After the resin in completely set, place small rocks (either real or made from Model Magic and painted pale grey, pink, etc.) in one corner of the pond. Flowers, cattails, logs, Woodland Scenic ground cover, etc. can be added too. A ledge can be created from foamcore board roughly 3/4 inch wide to go around pond, scored with a brick pattern, and painted to look like concrete or granite and then dry-brushed very lightly with moss green. This ledge is a nice touch because it gives you a place to put potted plants, cats, turtles, etc. Resin: Two-part resins work best (Envirotex is one of these. When you mix the two parts, pour the catalyst into the base, rather than visa-versa. Always wear plastic gloves and use disposable containers in a well-ventilated area. Never pour it all in one go. Pour thin layers of 1/8 to 1/4 inch, letting it cure between each layer application. If bubbles appear as the resin is curing, blow on it gently to "pop" the bubbles. Some use a blow dryer. Do each step SLOWLY - mix resin slowly, add dye slowly, pour slowly. Waterfall: Cut/tear strips of clear plastic wrap (very thin). Let it "fall" from an upper pool into a lower pool. Pour the resin over the strips. It will cling and look like falling water. The heat of curing resin makes the plastic wrap shrivel and disappear. |
Web Design: Any of you who want to learn some good basic style information for building websites, here is a site that has a whole course that is free on the Internet. http://info.med.yale.edu/caim/manual/intro/purpose.html Start there and just take the course for free, by following the links. Another good source is a book called "HTML 4 For the World Wide Web" by Elizabeth Castro. You can get the book at the library and Ms. Castro has web pages to go to for each chapter in the book so you can see how what you are reading about works. You can do all of this for free to find out if you really want to get into doing WebPages. Grace Shaw |
Planting flowers: I recently taught a garden workshop in our mini club. First we covered the base with a product called Sculptamold. It's a powder that you mix with water. We spread it on, building up flowerbeds and generally contouring the ground. Although it dries hard, you can sand it, drill it, carve it, etc. etc. Very adaptable. You then paint it appropriately - brown where you will have flowerbeds, green where you sow grass. When this dries, add your soil and grass products (purchased at a model train store) to the appropriate areas. Marlene Thomas |
How to Save Images and Fill a Page with Them for Printing: Rather than saving the HTML file that a printable appears on the net, you need to save just the image. With your mouse on the image, click your RIGHT mouse button. A little menu will appear and allow you to "Save Image As" or "Save Image." Save it to your hard drive. Now, open the image in an image editing program that will allow you to copy and paste it repeatedly to a full page. Or, copy and paste a variety of images to a page. Either way, you can fill up a page before you print it. Anne Gerdes |
Scanners: I think the inexpensive scanners do a fine job. I would be more concerned with what photoshop software is included with it. Fannye |
Saving Tips: I opened a document in my word processing program, Microsoft Word, and keep a running list of tips and "recipes," which I've cut and pasted from the digest. Using bold type to highlight the significant word or phrase, like folding screen or bending wood - sure helps when I run back through my document looking for something I've saved. Wanna in El Paso |
Scanners: I just finished a hat kit from Dana of Miniature Art. She wanted everyone to send in a picture of their hat. Since I do not have a digital camera, I took the cover off my scanner (it just lifts off), set the scanner on its end in a vertical position, set my little hat up on a couple of boxes so it was in the middle of the screen and then covered everything with quilt batting and scanned it. While I was scanning I discovered that I could cut the picture down in the scanner to eliminate the boxes and just got the hat. Elizabeth Cooper |
Resources: JPEG compression program, I used the JPEQ optimizer. It substantially cuts the size of the image file without cutting the size and the quality of the photo is not affected very much. It can do hundreds of photos automatically. The web site where you can download the program is http://www.xat.com You can download a demo, and the program itself is $29. Carol |
| Previous 10 | Next 10 Page 766 of 1032. Total links in database: 10312. |
|
Browse the database (all entries) |