I type my box labels on the computer and print them out (in fancy script, no less). If I change what's in a box, I just paste a new label over the old. If you can't stand doing that, rub a little grease or oil (vaseline, hand lotion, mineral oil) onto most any paper label, let it sit for half an hour or so, and the label comes off clean. Doesn't work for shiny labels, but works great for price tags. Lee |
Possible Weeping Willow Material: One local craft store has had hanks of fake asparagus fern that would probably be a pretty good starting point: long narrow pointed leaves twisted into wires. You'd have to sort of work backwards with these to join them into bigger branches and then into a trunk. As I recall, price was eight or nine dollars, B.C.(Before Coupon.) Enough for a tree, with leftovers. While you're checking, do look at all the greenery. Some of it comes in little inexpensive sprigs, and much is adaptable for our gardening. Mary |
Flower Punches: The new Fiskars squeeze-type punches, under $5.00, seem like good quality. The "blossom" - a wavy-edge disc shape - is useful for leaves as well as flowers. With punches of this type, you can pry off the "catchers" to use them upside-down and see where you're punching. If you can see where you're punching, you can add other colors to the paper before you punch (e.g., yellow centers). A template made from a strip of card with a line of punched-out holes can help with size and spacing. You can also pre-score radiating lines, which usually cause the piece to cup up differently than unscored paper. Disadvantage: it's trickier to align and punch several marked sheets at once. On the other hand, since you don't need markings on all blossoms, you can stack up a couple of sheets of other colors to punch at the same time. (When bits of paper stick together it's easier to separate different colors, anyhow.) Mary |
Flowerbeds: First: look at flowerbed drawings in books and seed catalogs. There's not a lot of detail, just overall impressions. Such pictures enable people with good eyesight to overcome that handicap and see the world as we nearsighted ones do. So, go for overall effects. As you might expect, plants are arranged to be visible, so if they're against a wall, the taller ones are in back, lowest-growing in front. Lots of leaves imply that plants are flourishing, and I suggest flat-bottom bases because (a) many flowers have most of their leaves at or near ground level and (b) fastening leaves singly onto wires is a necessity but also a bitch, and no point in doing more than you have to and, (c) if you don't want to complete your entire flowerbed in one great gallop you can display stuff temporarily in pots and planters and transplant it later. Maybe the best way to put it is, think in real life terms: a "bed" is really a collection, an assembly, of plants. Mary |
Ivy: I have successfully made ivy using the smaller maple leaf punch. You punch them out (I use artist's paper in a darker green) and snip the stem off each leaf. Outline the edge of each one with a light tan or gray paint. Leslie |
Vines: If you don't want to cut and glue thousands of leaves on, you can try Stretchy Lanscaping Foliage. Woodland Scenics #51 and #52 are the kind I have used with good success. Very easy to use and looks real too! Roz Weitzman |
Ivy leaves: Here's a free alternative, and depending on where in Oz one lives, it may still be possible to get them - Birch Tree Catkins. These are the dangling flowers/seed cones of the birch tree. If you pull them apart they are made up of hundreds of tiny leaves with the seeds tucked between them. The silver birch is particularly good but other types of birch also have catkins that contain leaves. Sandra |
Tree bark: The process I use is, after I have the trunk twisted up from copper wire, I wrap it with Creative Paperclay. After I have the trunk and limbs covered with a thin layer (about 1/8 ") take a stylus or round off the end of a bamboo skewer and then rake the bark. After the bark is dry, paint it with successive thin washes of acrylic paint. To see a sample of an old oak tree, go to my web site and look at Crossbridge Cottage. http://community.webshots.com/user/rikpierce Rik Pierce |
Tree bark: Have you thought about perhaps using a gnarled dead branch to make a mini tree? For example, a piece of grape vine or even an old, mature rose bush on its way to the next life? They look gorgeous, and you don't have to make bark. Maureen |
Vines: If you can lay hands on a pair of deckle-edge craft scissors (I like McGill's best, but Fiskars is fine) you can make up a heap of leaves fairly fast - they're not really suitable for small vines, but work pretty well as thick mats of greenery. What you do is: 1. Crumple up some quarter-sheets of paper that you've slapped green paint onto and then smooth them out again (so they won't end up totally flat). 2. Use deckle scissors to trim off three edges of the paper; hold it by the fourth edge and cut it into a deckled fringe. 3. Now hold scissors so they're diagonal to the fringe, and make a series of diagonal cuts. You end up with pieces that are roughly diamond-shape, with wavy edges. 4. Gluing onto backing is something I'm still fiddling with - definitive solution, anybody? So far, I've spray-painted irregular pieces of used laundry softener sheets (simply because they're thin, flexible and strong - other stuff would undoubtedly do - scrim? netting? lightweight screening?), then sprayed these with adhesive, dumped on some leaves and tapped them all over to adhere as many leaves as possible without flattening them out. Shake off loose ones, use tweezers to pick up others, touch them into glue and then down onto the sheet, again trying not to flatten the whole thing too much. 5. Save back some of the shapeliest leaves to use on edges where the stems will be seen growing out. Mary |
| Previous 10 | Next 10 Page 768 of 1032. Total links in database: 10312. |
|
Browse the database (all entries) |