Sprinkler Watering Effect: To create the arcing effect of a lawn sprinkler, consider the use of clear fishing monofilament line. The fish line has a "memory" which means as you unspool a piece of say 6", it tends to curl itself into the same shape it had on the spool. Therefore if you cut a 6" piece off and glue it to the "sprinkler head" it will appear as an arcing stream of water. Using a few of these may create the sprinkle effect you want.

Bob in Hollywood, FL


Making Miniature Water Lettuce from Polymer Clay:

Water lettuce is a floating plant. It looks like an opened-up head of lettuce. They get to be about 6-8 inches in diameter, maximum, with roots as much as 12 inches long that hang in the water.

Materials:

Polymer clay: create a light green color using green, yellow, and transparent
Ceramic tile: to work on, and use to bake finished plants
Round toothpick
Wooley thread, separated, to make the roots.

1. Mix green, yellow, and transparent polymer clay until you get a pleasing light green color (see picture of actual water lettuce).

2. Start with a 1/16 to 1/8 inch ball of clay

3. Squish against tile with finger, letting it be thicker in the middle than at the edges

4. Using the last 1/8th of the toothpick, lightly press "dents," in parallel, into the clay

5. Push at the sides of the clay using your fingernail, shaping the leaf into a petal shape.

6. Lift the leaf. If the clay is quite soft, lifting it will distort it somewhat. That's ok, because all leaves in nature are not uniform.

7. Arrange each lettuce with the bigger leaves on the bottom, and the smallest on the top, with the smallest being just a folded piece of clay in the middle.

8. When you've made all the plants you can put up with making, bake the tile with the plants according to clay instructions.

9. Separate small lengths of needlepoint yarns to make the roots. You want to make it kind of like a tassle that's had a haircut--the outer strings are shorter than the innermost strings.

10. Glue to the bottom of the baked lettuce.

When I plan to "float" my water lettuce in a resin casting, I'll suspend the bunch of threads so that they can hang down below the surface. After the resin is hard, I'll glue the lettuce heads on top of my "roots."

Trish in San Jose, CA


Nap finish on Cat tails: To make the nap finish on the cat tails in my pond, I saved the wood dust from my sandings etc. and when I made the cat tail, I coated it with Elmers glue and rolled it in the wood dust. Voila! fuzzy cat tails.

Bob in Hollywood, FL


Birch Leaves - You can get a tiny birch leaf punch - its made by Family Treasures and I'm pretty sure it is available from www.punchpalace.com - try under the mini extension punch heading.

Its probably not more than $5 or so

Lesley in Johannesburg


African Violets: Barb Plevan has a website where you can see a picture of her african violets that does not do them justice (I have all 3) http://www.barbplevan.com

Anne Gerdes


Landscaping: I also collect many things from my garden to use in miniature. First tip - Anything you bring in from outside should go in the freezer for 24 hrs. This kills any critters lurking inside. I gathered what I thought were small pinecones, dry mushrooms & bark. Within 2 days there were little piles of sawdust beneath them. Somebody was working inside!

My favorite dirt is better than tea or coffee grounds. I use a planting mix called Super Soil for my outside pots. Sift it through a piece of screening and you have what really looks like dirt. Also use a glue called Weld Bond for gluing all landscaping (even foam, which I don't care for.) It's used my the model railroaders as it dries flat, no shine where you don't want it. It can be diluted with water add a dash of liquid soap and sprayed on, over and over.

A good grass for miniature yards is made by Department 56 called Village Green. They make the Dickens Village and other ceramic houses. It comes on a sheet (about 18" by 24") with paper backing,and when cut to size, it glues down easily & smoothes with a brayer. It can even be vacuumed when dusty!

For some interesting trees, I've found the roots of bell pepper and marigold will dry to a perfect tree. Just add the leaves.

Ruth in Grass Valley, CA


DIRT: It's not a case of whether tea is better than coffee or store-bought stuff. Availability and price are usually factors, and so - definitely - is suitability. Experiment. A dry-country garden of cactus and succulents would look weird growing in the rich moist soil that coffee grounds imply. You need a paler dustier look. If you've an expendable coffee grinder (e.g., thrift-store buy) you can try grinding up outdated herbs lurking in kitchen cupboards, maybe mixing with dried tea. Small bits of real life barkdust can be made yet smaller, for the look of a seasoned mulch or paths. Give this a jolt in the microwave, though, to eliminate creatures. (Barkdust: in case that's not international, it's a name for chunks of bark stripped off logs and sold for these purposes.) Someone already mentioned that the model railroad places have lots of possibilities, right?

Mary in Oregon


Dirt: If you have access to a carpenter, or cabinet builder, ask them for the fine sawdust often found under their saws. The fine saw dust can be stained any color you want and used for dirt in your dh's. They also often have fine wood shavings which can be stained and used as mulch. My DH is a carpenter and we get tons of the stuff out from under his saws! No worry about little critters or bother to dry or bake!

Grace Shaw


Durham's Rocks: To make rocks, you mix your dry powder with water (and paint if you want it to be colored throughout) until you have a putty like consistency. Break off small chunks, and put them into a plastic container (such as an old butter dish) that has a lid. Add some more dry powder and shake. You can continue to break into smaller pieces and reshake if you want smaller rocks. Spread on a flat surface to dry. The rocks around the door and on the pathway are just globbed on and poked with a finger to shape, and then painted with some washes of different rock-like colors.

Bonnie Gibson


Carnations: I make my carnations from Kleenex just like the ones you make for decorating wedding cars! It is a bit fiddly but looks effective, especially en masse. Take a piece of Kleenex and cut it into squares approximately 2" x 2". (This is bigger than the flower will be but gives you some working room for fingers.) Pile 3 of these squares one on top of the other then accordion pleat them. With a fine piece of wire, loop around the middle of the 'fan' and then twist the wire to secure. Next, carefully separate the different layers of tissue and fluff it out. Now trim to the size you wish. If you very gently snip the edges of the tissue - sort of fringe it - the carnation will look very fluffy.

Patricia Yackison


Previous 10 | Next 10


Page 791 of 1032.

Total links in database: 10312.



Search for:


Browse the database (all entries)