Paper Flowers: The flowers are made with paper punches, using modified instructions from Ruth Hanke's books. Ruth is from Blue Earth, MN and uses the business name Hanky Panky. She advertises in the Dollhouse Miniatures mag. The flowers are easy to make but quite time consuming. While visiting Chris in MN a few weeks back, we worked many hours to create 2 dozen sunflowers, 20 or so Iris, and a few mums. They all turned out great, so it was worth the effort. We adapted some of her instructions to use inexpensive punches or other materials. For example, the inexpensive craft store-maple leaf punch makes good geranium leaves if you snip off the pointy ends of the leaf - much cheaper than a custom punch or laser cut leaves. Also, onion grass from the craft store can make great inexpensive iris leaves and they look great.

Bonnie GIbson


Computer Viruses: A reminder about computer viruses: Please remember to use caution when a mail message is received from an unknown source or from a known source with a suspicious attachment. If any of you has any questions about viruses - what they are, how to protect yourself from them, or get rid of any you "catch" - check out http://www.symantec.com or http://www.mcaffee.com.

Anne Gerdes


Lot's of good anti-virus questions! Wow!, what an exciting response from people regarding anti-virus. I am glad to see so many of you are using one of these essential tools on your machine. With this response I noticed that there was one small oversight and I just wanted to give y'all a nice little suggestion to keep your anti-virus programs up-to-date.

Updating!!!!

ALL anti-virus programs, McAfee, Norton, Trend, Sophos, Panda, etc. require that you occassionally update a special set of files found in their program. McAfee calls them .DAT files, and I like that name (It is cute, like little data files, only smaller), so I will use it here for the purposes of this little discussion. These DAT files are used by your av program like a little database. when your anti-virus program scans your computer, it uses these little files to identify virus codes, what the virus name is, and how it can be cleaned. Pretty cool huh? Well viruses come and go, so that means that your DAT files need to be updated to represent the current viruses out there on the Net and email. If we don't update, then the anti-virus program only scans for the old viruses not the new ones. Believe me the new ones are very, very ugly these days.

This means we have to update. You can update by opening your anti-virus program and locating the Update function in it. (If you can't find it, check your help menu for Updating). It doesn't take long, and is simple to do. Most of the products will self install their updates, which results in you having to do very little to do.

How often should you update? Most of the big companies put out updates fairly frequently, McAfee does it every Thursday, Norton does at least 2 a month. I encourage you to update a minimum of 2 times a month.

This is a pain to remember, do I really have to? If you don't want to, some anti-virus companies offer a number of different ways to keep your computer updated. Some have subscription websites that do all the work for you (approx 25$/year) , some use a program called SecureCast to get the latest virus files out to you (free)... and the list goes on. Pick the one that is most comfortable to you. After all, if you don't use it, it's useless.

Most viruses found on systems are due to the "DAT" files not being current. Remember, virus writers spew hundreds of these little monsters every little week! Some are pretty useless, but there are always a few out there that cause mass destruction.

Sudie Parker


Christmas Trees and Depth Problems- There's a way to make a Christmas tree (or an outdoor evergreen) that reduces the depth problem, though it's easier to start by describing the full version: Just glue equal-length branches of pipe-cleaner type material ("pine stems," etc.) to a cardboard cone. It's the cone, not the length of the branches, that determines the overall shape of your tree. Fiddle around with scrap paper until you settle on a final version.

Cut cone to desired size from dark or painted cardboard, including a tab to glue under the opposite side. Shape the cone with your hands, but flatten it out again for gluing on branches. Cut a bunch of branches roughly five-eighths of an inch long. Turn about three-eighths of an inch at right angles; the short leg is glued to cone. Note: the needles MUST grow toward the tip of the branch, or they'll look weird. With E-6000 glue start at the bottom and glue branches densely onto the card, leaving a bit of space at both sides. When most of branches are stuck on, glue the cone into shape; use clips as necessary to hold while drying. Don't worry about the hole at top. When dry, fill in gaps and top, and prune as necessary.

As for the shallow-space version: Make a narrow cone with tabs on both sides, and glue these onto a flat back.

Mary (Oregon)


Making hills - Get some 2 inch thick foam insulation board at a home improvement place like Home Depot. This is used for insulating real houses and comes in a 4' x 8' sheet for about $20. It is easy to cut with a sharp kitchen knife and can be glued together with Liquid Nails, a construction cement that comes in tubes. You'll need a caulking gun to dispense it. Also get some bamboo skewers to hold everything together till the glue dries.

Cut the foam to the general shape and glue it. Final shaping can be done after the glue dries. When you have everything shaped, you will want it cover it with a thin layer of Clay Mache. When that dries, I use Creative Paper Clay to form the rocks and strata and the stream bed. For water, I use Enviro-Tex Lite, a two part resin and put it on in thin layers of about 1/8 inch. Before the last layer is completely set up, I texture it to look like moving water and use a little white paint after it dries for foam.

For ground cover; grass and small plants. You can use either AMSI ground foam or Woodland Scenics foam. I prefer AMSI since it doesn't deteriorate with age.

Rik Pierce


Weeping Willow: Don't weep for a willow, make one! Get yourself a big branch, either from your yard or a floral supply place or craft store. Buy some shredded foam foliage in spring green in a model railroading or miniature shop. Drag thread through tacky glue, then through the foam. Hang from the branches of your trunk, and voila! Instant (after a lot of work) weeping willow!

Alice Zinn


Saw Dust: I think sawdust is the raw material for an innumerable amount of things. Here are some. Saw dust:

  1. Can be strained through a piece of screen, kitchen sieve, old spice shaker bottle, etc. to get different textures.
  2. Can be mixed together in different natural colors to make a variety of dirt, mulch, ground covers. Easier than coffee or tea.
  3. Can be put into a plastic bag with a little diluted paint (Greens, browns, blacks.) Fold the top down carefully so air stays in the bag and shake until color is distributed as you like. Add more paint if needed. Lay out on waxed paper and stir around as it dries. If you used a lot of paint, you may have to put it into a new bag and shake again before it's dry to avoid clumping. Make different shades of grass, which you mix together in different combinations for landscaping.
  4. Use bigger bits for rough grass, bushes or tree greenery. Just like the bagged materials from the hobby shop.
  5. Watch as you drill any item, for the results can be interesting, in wood or plastics. I've gotten mini foods like cooked red cabbage and parmesian cheese from my drilling tails.

Janine in Prescott, WI


FINDING THINGS: Anne G's instructions for locating topics in the SS archives also work (at least with AOL) for hunting a topic or writer in one of the Digests. Hold down Control key, tap the F key, and you get a sweet little window in which to type your word. (It took me a while to figure that when you see, for example, Control + F, it means that you keep holding down the first key while you tap the second one.)

Mary in Oregon


Tomato Plants: We used to make and sell tomato plants for the garden.....we now do food and accessories....and leave the plants and flowers to better gardeners. First, fill the pot with fimo or other base material to "plant" in. Cover with dark brown railroad "dirt". Cut a 1/8" dowel rod to the height needed to extend about 1/4" above your finished plant and put in the center of the pot. "Plant" sprigs of pepper grass (found in the dried flower dept of the craft shop or florist shop) around the stake. Make the tomatoes from red fimo, put a little star shape of green on the top and poke a tiny hole in the top with a wire and bake. Take green florist wire and bend into a shepherd's crook. Glue the tomato to the end of the crooked wire and let dry. "Plant" your tomatoes in among the sprigs of pepper grass. Use a single strand of embroidery thread to "tie up" the tomatoes and then spray the whole thing with a light spray of matte sealer to keep the pepper grass from drying out and falling apart.

Kathie, J & K Miniatures


Sears Mini tool kit: You can reach it this way tho: www.sears.com - when you get to the home page, click on tools from the top menu. When you get to the next page, do a search for "mini tools". From the page that shows the available tools page down to mid way (approximately the 17th item down) and pick the one that says 50 piece tool kit. You will then go to a page which shows a picture of the tools etc. in the kit along with the price.

Lynn in the Foothills of the Ozarks


Previous 10 | Next 10


Page 798 of 1032.

Total links in database: 10312.



Search for:


Browse the database (all entries)