Floppies, according to the experts, only have a shelf life of about a year. You should back-up anything on them immediately, and discard them after about a year or so. I make a living on these com-pooh-ters, and I can't tell you how many of those floppies I've had to discard, some with important info on them that even Norton Disk-Doctor couldn't cure. (It's a great program, highly recommend it. It'll help disk problems 98% of the time, so long as the media is still good. Dave Pierce |
Orchid bark - I had to laugh about using a food processor for Fimo: I ruined one with Fimo! Now my ex-coffee grinder is being used to grind real orchid bark for my tiny orchid pots. When the orchid bark is small enough, I mix it with white glue and a few drops of water and carefully spoon it into the pots. If you don't put a few drops of water in, the glue will dry shiny. Mary Kinloch |
Big tree: I had an old set of battery booster cables which I stripped the covering from, leaving a fat wire of twisted copper wires. I cut a rather long piece of it and used it full size at the trunk and bottom of the tree area. I separated the wire and formed roots to run out from the tree and twisted them into separate roots, not making them exactly even in size. Then I started on the top....separating to lots of limbs, and with each group of wires for a single limb, I separated parts of it into smaller branches and continued the procedure until I had a full size big tree with lots of branches and a full trunk and roots which I could spread out to make the tree stand up. I placed this on a base for the birthday scene I was making and flocked it well with various shades of the "green stuff" you purchase in a hobby store or train store. Katherine |
Floppy Warnings: I also am a computer professional and I must say that floppies are an unstable medium. It is easier to restore a crashed HD than a floppy that has gone bad. I cannot tell you how many REALLY upset users I would get when they realized that the floppy they had been storing some vital, not backed up, file died. I would then be forced to give them "The Talk" about backing up company information in a responsible manner. Oh the tears. Generally they would blame me, which I did not mind as I truly "felt their pain". I cannot stress it enough, I was a PC Tech/helpdesk girl/IT catch all for eight years. Get a big HD (these days they are pretty darn cheep), get a CD burner (around $140). That will cover all your bases. Some of the PC's at our house do not even have floppy drives anymore. Jeannette in San Jose |
Tree: Get yourself a tree branch the size that you want your tree. Add foliage in one of the following ways: Have patience and soon, a tree will grow in Iowa! Alice Zinn |
Computer Storage: The only way to be sure you won't lose a file is to back it up, i.e. have a copy of it on more than one location. You may have a copy on your hard disk, and an extra copy on floppy or ZIP or CD-ROM or tape backup or another hard drive. Any one of these electronic media can develop a fault, and fail, so two or more copies is the only way to be sure. Out of all of the possible choices floppy disks are the least reliable and wear out the quickest, but they have no set time span. Some may last years and others may be faulty after one use. Generally I would recommend working on your hard drive, and backing up regularly to one or more other locations/media of your choice. Your hard drive has the fastest access time, and in general is very reliable; so is the best choice to work from. Yvonne Canevese |
Grouping Pictures with Publisher: On the tool panel that runs down the left side of the screen, there's an icon for PICTURE. (On my version it's a picture of a cactus in the desert.) Left click on that icon, then move your cursor to your blank page and left click anywhere on it (you can move your art later.) This will draw a picture box. Right click on this box, and your menu options will include "Insert Picture File." Select that option. It will default to your clipart file, but you can go in the "Look In" area at the top and change it to "3 1/2" Floppy A:" Bring this up and it will show all of the files on your floppy. Click on the one you want to insert and click OK. This will then bring up a box on your Publisher page that asks if you want to resize your box to fit the art, or resize the art to fit your box. Choose resize box, so your art stays proportionate. Your art will then be loaded onto the page, at which time you can size it to whatever size you want using the resize clickable corners and the rulers at the top and side. Then, repeat steps to fill your page as much as you want from your floppy. (Make sure you have plenty of free hard drive space, as this procedure takes up a lot even going to the printer spool.) If you fill an entire page with these, you will not be able to save them on a normal floppy, as the file is too large. You'll need a zip drive for that. Tere Perry in Texas |
Grouping Pictures: I have Photo Suite III and Publisher. Here's what I do. 1- Right click picture, go to properties and write down the size of the picture in pixels. Graphics programs are notorious for not importing in the original size. Now import the pictures one at a time and do any editing such as enhancement or color etc. Save any changes you made. IMPORTANT- If the pictures are in jpg, change them to tiff. If you don't have to enhance the pictures, skip this step. 2. Open Publisher to a blank page. Make the margins as small as your printer will allow. I use 1/4" on the sides and 1/2" top and bottom. Now import your pictures one by one and place them so that you have a whole page of pictures. Publisher will not distort the size. The reason I use Publisher is because I haven't been able to make a collage in the graphics program and be certain the size of the pictures is correct. Publisher is a lifesaver for things like this. Email if anything is not clear. JoanneO@worldnet.att.net Joanne Offutt |
Really Big Tree: Gather some tree pieces/parts from the yard. Either bake in the oven or spray with bug spray several times and allow it to dry to kill bugs. Then strap together in a pleasing shape with masking tape. Use hot glue to add limbs here and there, wherever you want and cover the whole thing with either paper mache products, Durham Wood Putty or that material they make casts for broken body parts out of. Let it dry somewhat and paint to pleasing tree color. Then stretch steel wool, that you have spray painted green, very, very thinly over the limbs and glue the various shades of green landscaping foam over that. Then to add a little color I use some grass seeds, Bahaia I think it's called. Anyway, any grass seeds that look like tiny leaves would do. Just spray glue the tree and thinly sprinkle over the whole tree. Gives a little more reality. I guess you could bake these seeds to kill any idea of growing they may have, but with the spray glue and a nice coating of fixative after all has dried - well, I don't think they'd stand much of chance of any growth. (Although growth would be interesting, maybe.) Anyway you can use some really big limbs to make a really BIG tree to go by a really big doll house. Fun to do. Fill it up with all kinds of knot holes for many wonderful little birds and animals, fairies and elves, etc. Jane Ratcliffe |
Grouping Pictures: I use both Paint Shop Pro and Corel Draw. In version 5 PSP you can create a new file, and give it a size of 8 x 10.5 inches. Then open the pictures one at a time and do edit copy, edit paste "AS NEW LAYER" to the new file and arrange as desired. Then save the new file...really don't forget this! Then do a print preview and then print. In the PSP version 6 or 7 Open the files you want to print Choose "Print Multiple Images" Now just drag and drop and arrange the images on the page. Be sure to save this page and then print. In Corel version 3 just open a new file and then do a file import and arrange each pic on the page. Be sure to save your "big page" with the multiple images. And be sure to do a test print on paper to get the colors as good as can be before printing to canvas. The print to canvas will resemble the paper output more than the "monitor colors" If you have any more questions feel free to email me too. wkinder@dialnet.net I've learned a lot about color adjustment/correcting "tweaking" to get good printed output on specialty items and am happy to share it if I can answer your questions. I absolutely love using my computer to design and print to fabric, canvas and specialty papers. Combining minis and computer technology is such fun! Wilma Kinder |
| Previous 10 | Next 10 Page 800 of 1032. Total links in database: 10312. |
|
Browse the database (all entries) |