Leaded Glass: The suggestion to use golf lead tape does work, but because it's real lead, if you're doing a dollhouse that children will be using, you could use Pilot or Permawriter Silver Microtip pens found in office supply stores to do the lead. These brands of pens can be purchased with micro fine tips, are permanent after dry, and will give a slightly raised edge so you can "paint" between the leading or even "frost" or make mini "chipped glass" look designs. When we originally built the Oakmont, the custom dollhouse we designed for the grand daughters, we put up a special page for dollhouse stained glass tips at this URL:

http://www.geocities.com/Heartland/Hills/8157/sghelp.htm

The pictures of the stained glass windows can be seen in our "construction journal" and the finished "tour the Oakmont" sections from the main dollhouse website.

Wilma Kinder


Mount board/Mat board: Is mat board the same as mount board (used for picture framing)? If so, I have made a room setting featured in DHW magazine June 99 designed by Joan Key.

All the furniture was made from mount board which I glued, painted with acrylic paint and glossed. I even stained some and it is so hard and it did not split and is still in good condition. I was also told by my friendly guys in the railway hobby shop when I first started making mini furniture (didn't know about bass wood) that balsa can't be stained - well I have stained it with success.

Melinda from Down Under


Leaded Glass: Using copper foiling tape can work too. Just slice down a length of tape to get long extra thin strips, stick it onto your glass in your desired pattern and then run a bead of solder along the lengths of tape. Hides the joins and creates a raised 'lead' - use a small soldering iron for the job if you're using thin glass though. My 80 watt soldering iron is too hot and cracks thin glass real easy. Then you can fill in the gaps with glass paint or Weldbond in a cross hatch pattern for clear textured glass or just plain straight strokes for antique smooth glass. I read in one of the last SS's someone said that lead is actually metallic grey - but it does go black with age - advanced age that is. When I am doing real life stained glass I buy a tub or carbon black powder, (insidious fine powder that is almost like photocopier toner to look at) and when the window is puttied and dry, I buff the entire window using a real hair brush and carbon black which creates a real black, satiny finish to the lead and makes the soldering blend in much more. It is designed to make the window look older than it is, so I guess with that in mind, black lead lines would be acceptable if the windows were supposed to be on old buildings?? If you decide to try Carbon Black though, do it outside and expect to be grey all over when you have done!!

Trace


Leaded Glass: another idea for the leaded glass comes from an old Nutshell News is to use the black draftsman tape. It comes in 1/8 and 1/4 and 1/2 inch sized and works very well for everything.. it lays very flat and sticks great. Available at Staples.

Stevenie Tremblay


Leaded glass: To cut the lead tape, use a very hard surface, such as ceramic tile or piece of window glass. The Xacto knife must be SHARP, use a new blade. Use scotch tape to attach the top of the lead tape to the surface, then start cutting about one eighth inch from the top. The tip of the blade dulls quickly, so change the blade often. Only the tip is dull, so use the dull blade for other uses. I use several different color Xacto handles, the black handle is new and fresh, when it starts to dull, I change that blade to a yellow handle, when it gets really dull, I put that blade in a red handle and use that one for cleaning metal castings that do not require a sharp blade.

I used to sell leaded glass supplies for dollhouse windows, and now the thin glass and leaded glass supplies are now available from George Wristley. Email me if you want his address. Rainbowdj@aol.com

Dean Jenson


Golfer's Lead Tape: the lead is a silvery colour just like lead usually is. If it appears black on full sized windows it has aged or been treated to make it seem black but in its natural state it is a steel colour. To use it for mini windows, remove backing from a piece of the lead tape and stick it onto a piece of scrap glass then use a steel cork-backed ruler and a X-acto knife to cut thin strips to use on the window. Put strips on both sides and then go over whole window with Weldbond glue. When it dries it is quite clear and makes the glass look like old hand-made glass.

June Simpson


Golfer's Lead Tape: I use the golf lead tape and have great results. You just lay your pattern under your piece of glass. I place the tapeside of the lead tape down to another small piece of heavy glass for easy cutting, and to see the cut easier. Use a straight edge as a guide and cut with a sharp exacto blade. You can cut extremely narrow strips that can be pulled up and retaped to the glass over the pattern. I use needle point tweezers and the tip of my exacto blade to achieve placement. I cut my strips to about 1/32" of an inch. A few practice times, and you will be surprised at how easy it is. I buy my tape from a miniature store, but I understand you can get it from any golf supply store. To get stained glass I simply paint with stained glass paint by dropping the paint within the pattern. Did you know that if you paint the outside edges of a piece of glass with black paint, you can use regular glass, and the thickness won't show in the finished project?

Carol Wagner


Lead: I have been reading through all of these posts about using lead for the stained glass windows and I am somewhat concerned if this is real lead you are using. I hope you ladies are using gloves to handle the lead and are keeping it where children can't get hold of it. I was really concerned when someone mentioned some sort of lead in a wine bottle cap. Lead can be very toxic, especially to little ones. There have even been articles in some of the medical journals about using leaded crystal over a period of years. Wine is said to leach the lead out of the crystal. I don't want to sound like an alarmist or spoilsport, and I know you are using minimal amounts, but if you work with it frequently, wearing gloves is a wise precaution. Also, make sure that no scraps or bits and pieces are where children or animals can get to them. It takes much less exposure for a small child or small animal to develop problems.

Dolly


Golf Tape: I just couldn't deal with this stuff! Had trouble cutting it, forming it, so I gave up. I got some very thin silver solder at Radio Shack and used that for my stained glass windows. I just cut it, bent in into the shapes I wanted and glued it on the doors and windows. After more than a year, it's still there and I am very happy with it.

Carole Pierce


Imitation Leading: I was thinking that for smaller scale windows, you could probably use gray coat button thread and do the same thing. Just glue it on the windows and fill in with Gallery Glass paint.

Anita Myers


Previous 10 | Next 10


Page 803 of 1032.

Total links in database: 10312.



Search for:


Browse the database (all entries)