Lead thread: It comes on a spool like regular thread and comes in different weights, it is used for tying flies that are supposed to sink. The spool he showed me just looked like heavy grey thread but without the twist. Available at fly tying supply stores. For that matter I just had this wildly improbable thought that it might be useful for faux chain mail. I have medieval stuff on the brain it seems. I hope this helps someone get the perfect window.

Esther


Stained Glass: A few years ago my mini club did a class in stained glass windows. We used acrylic panes cut to the right size. Drew the design on paper and taped the pane over it. Cut lead tape (you can purchase this at sporting good or pro shops) in 1/32 inch strips and outline the design on the pane with it. Then take a dowel rod and roll over the tape firmly so that the color doesn't seep under the tape. Then using a toothpick, put drops of stained glass color inside the design and "paint." For more realism, after the color is dry, you can turn it over and tape the design lines on the other side.

Rusty


Stained Glass Windows: On a piece of paper draw the image you want to place on glass. Place the piece of glass over the drawing. Using a silver or pewter color glass paint, follow the outlines of the glass sections on the paper. After the pewter paint dries, color in with glass paint the colors to the various enclosed areas you created. When all is dry there should be a semblance of a stained glass window.

Dr. Bob...Delray Beach, FL.


Stained Glass Leading: Those of you using liquid leading for the minis may want to check out the "Plaid" (Brand) "Tip-Pen" Craft tip sets. One set contains 3 very tiny Metal tips that will fit the plastic bottles; the other set contains four tiny caps, 3 tiny bottles and one "bottle" that is actually a mini syringe. Either of these sets really makes it much easier to get the mini leading lines better than the original "liquid leading" bottle. It's so much easier to squeeze steady and drag with the smaller kit bottles (especially the syringe bottle), and the micro fine metal tips make the leading very tiny for mini scale. The tiny tips also work great with liquid glue for those of you who like to glue fabric. Here where I live, in SW Missouri, the little "Plaid" brand, metal tip sets are sold at all the craft stores and at Wal-Mart.

Wilma Kinder, SW MO Ozarks region


Stained Glass Leading: Here is another method of getting the "leading" for mini stained glass windows. I have not done this in years but I remember it was quite effective and especially, very controllable. This is, in part, an excerpt from my NN. Nov. '88 article...the window is in a church:

- -The stained glass window used was cut from Dollhouse Stained Glass Windows a Dover publication. Windows in this book are printed in black on transparent paper but he same method would apply to most any picture being used, on paper, glass, or acrylic.....as long as it is outlined in black or dark gray. You will be using clear embossing powder (this is primarily a rubber stamp medium and will be found where those type of supplies are sold). Mix a bit of white glue into water for a thin mixture...this will slow down the drying time of the water (acrylic extenders, sold with craft paints, can also be used with the water...or there is special, slow drying ink that is sold in conjunction with embossing powder, to use in place of the water). Using the liquid and a fine paint brush, go over the black design lines of the window, small sections at a time. Sprinkle embossing powder over wet lines. Tap off excess. When all lines are covered with powder and all excess powder is removed, and all lines straightened, h old window over heat from an iron, or light bulb (check embossing powder instructions for various heat methods). Powder will melt leaving a shiny, textured surface, making the black lines look slightly raised. Embossing powder comes in a variety of colors and the color of leading can be matched if you would rather use a color....this would especially apply if you are tracing the pattern onto glass rather than using a design that is already printed on a transparent material. The advantage of the embossing powder is that lines can be cleaned up as needed before heating, insuring neatness and accuracy.

Joann Swanson


Glass Leading Tip: For those who have a small syringe that is used to deliver small amount of stuff. Fill the opening with liquid solder. After the solder has "set" use a pin or needle (size-diameter) is your option and poke a hole through the solder lump. This will be the diameter of the "leading" for your leaded glass windows. Now fill the device with more liquid solder and proceed to make your lead lines on the glass. When finished, empty all the liquid solder from the device and place a pin in the original opening you made so it does not fill and "set" with more solder.

Dr. Bob...Delray Beach, FL


Diamond Paned Windows: I do not dilute Weldbond to create the windows. A suggestion for diamond paned windows, is wire form for sculpting. I found it at Pearl art supply and it comes in several grids. Solid copper so it weathers beautifully.... I am using it in my 1/4 in Snow White cottage classes. Otherwise you will just have to score your own sheets with a rolling cutter.

LadyBug


Diamond Paned Windows: I have just made window panes for my Harrison - a large Tudor-styled dollhouse. I used the Ready-to-Use page from a fantastic book which I believe is still on the market. The completed windows look really elegant.

DOLLHOUSE STAINED GLASS WINDOWS By Ed Sibbett, Jr. There is a full-sized page of the diamond pattern. I copied it on my scanner, and then printed sheets on my printer using a special product paper called "Inkjet Overhead Transparency Film". It is like a clear plastic sheet, but one side has a sort of rough texture to which the printer ink adheres. Since the panes look like the black-leaded type windows, these look more authentic than the white-edged ones seen on dollhouse kits.

Dolores


Diamond Paned Windows: If you can't find diamond pane windows go buy yourself a packet of biscuits ( I think you'd call them cookies) or crackers. Over here some packets come in clear plastic trays embossed with little squares (diamonds if you turn them). These are purrfect for tiles or diamond pane windows. Just paint dark grey in the grooves for leading and you're set!

Elli


Sticky tape for leading: re: sticky tape for mini stained glass leading. Many office supply stores like Office depot and craft shops like Hobby Lobby sell the ultra thin "architect's drafting tape". It comes in black, white, silver and gold and makes good mini leading. Has a sticky back and very good straight thin narrow pieces. A big roll costs about $2.00. Comes in different widths, be sure to get the real thin strips for scale. This stuff was used a lot by draftspersons before switching to the auto CAD drafting programs, and it's still used a lot for presentations on presentation boards.

Wilma Kinder in the lovely SW Missouri Ozarks


Previous 10 | Next 10


Page 804 of 1032.

Total links in database: 10312.



Search for:


Browse the database (all entries)