Cutting Plexiglas: Using a sharp knife like a linoleum cutter you score the Plexiglas as deep as you can with an even pull (don't go over your lines). It should snap just like glass. You might want to practice on a couple of cuts first, and just like glass, if you put a dowel under the cut you can break over it. Good luck. Jacqui in Hilo, HI |
Cutting Plexiglas: To cut plexi, score along metal ruler several times, then place score side up on edge of sharp table or other object and then quickly snap down holding tightly to part on table. I've used this method many times and works every time. You will occasionally get a crack in wrong spot and this is a bummer as the stuff is quite expensive and you hate to waste it but doesn't happen often especially with the regular 8th in thick pieces. Worse if you use the thinner stuff. Kathy in E TN |
Cutting Plexiglas: I cut Plexiglas with a table saw. If you are only making windows out of it, you could do it on a jig saw, but that is slow. For larger pieces, such as for a protective box for a mini scene, a table saw is the only way to get smooth enough, straight edges. However, upon reading your post again, I think you are cutting them for windows. Depending upon the thickness of the Plexiglas, I have scored it with a heavy duty utility knife (Xacto might be a little light), and then laid it along the edge of a sharp kitchen counter top right at the scored mark, and just snapped it. **A tool tip: when cutting wood, metal, plexi or whatever with a saw blade, the thinner the stock you are cutting the more teeth per inch of blade you must have to achieve good results. Barb Jones, Cupertino, CA |
Thick Glass: For those who want glass or Plexiglas to look thinner, paint the edges black. This is an old trick that I believe originated with Noel Thomas many years ago. Even very thick glass appears appropriately very thin if the edges are coated with an opaque paint and then framed. YES! you can make miniature stained glass windows with full-thickness, real, stained glass pieces. The real trick is to frame and case the window so only the height/width dimensions are visible and the thickness concealed Mel Koplin in Las Vegas |
Thin Glass: For many years, I cut thin glass for dollhouses but unfortunately my health no longer allows me to work with miniatures. Fortunately I was able to find someone to take over the thin glass portion of my business. He does not have email, but address and phone number is:
I understand he also had thin mirror available. Dean Jenson |
Diamond Paned Windows: A great source for DIAMOND CUT WINDOWS comes from the clear plastic "domes" that come on many party trays (from the deli/caterer) - They are usually patterned, and make nice beveled windows - crystal clear; not too flimsy. I'm trying to make a clear storm door - the center often has a large circular pattern - good for a very large circular window (or deep sea aquarium setting maybe) ... Captain Picard's porthole on the Enterprise, perhaps??? Stacey T. (Indiana) |
Mini Show Manners: I've been a dealer at many mini shows and some of the things that bother me are: Two or more friends stand in front of, and block your table, catching up on old times while potential customers are trying to get a chance to see what you have to offer. - Step out into the lobby or hallway to chat. When someone at your table is admiring or inquiring about an item and a friend calls from across the aisle or room to "come see what I found". - The odds of that person coming back to your table are slim. Wait until they are free and escort them to the table you want them to see. When someone lets their children (or themselves) touch everything on the table without asking permission from the dealer. - Ask if you may pick up an item to inspect it closer. A lot of dealers will be happy to hand it to you or hold it while you look. When someone asks for a discount if they buy a high priced item. - There's a reason that it is priced that way. This ain't WALMART. When some one places their purse, shopping bag, or other packages on your table, while either looking at or paying for their purchases. - Wear a fanny pack and place your shopping bag on the floor between your legs so you won't forget it. Most dealers have a clipboard, or should, to give you something to lean on while signing your check or credit card slip. When someone expects the dealer to pay sole attention to them, while there are other customers at the table. - Please be patient. The dealer wants to pay as much attention to each customer as possible, but cannot always do so. Unfortunately, we also have to watch for theft too. When customers have only large ($100 or $50) bills at the beginning of a show and buy a low priced item. - Have plenty of smaller bills so the dealers will have enough change for everyone. When customers say to their friends, in front of the dealers, "I can make that". - Think about the time and effort the dealer has put into R & D and has had the guts to put it on a table for hundreds of people to admire and/or criticize it. When people take pictures of your table without asking permission. - Just ask. Most dealers will be happy that you think so much of their work that you want to remember it, even if it is to try and make something like it. Imitation is the sincerest form of flattery. I'm sure there are many more pet peeves that dealers have, but if you just use some common sense and try to place yourself on the other side of the table, you will have a great time and be treated with respect by the dealers. Most of all, feel free to be awed, astonished, and amazed at the variety and quality of miniatures you will see at these shows, and tell the dealers how wonderful their things are. They should all be happy to talk to you if they are not busy and answer any questions you might have. Spencer StallSpencer Stall |
"When customers have only large ($100 or $50) bills at the beginning of a show and buy a low priced item. Have plenty of smaller bills so the dealers will have enough change for everyone." I can't remember how many times someone will buy something at my table for under $10 and try to give me a $100 bill to pay. It is just not fair to the dealers to expect them to be your changemaker! When you go to the bank to get cash for the show, please ask them for fives, tens, twenties only - even some ones. It will make life happier for all of us. Beth, In a Miniature Manor |
Mini Show Manners: Why are people agonizing so much about proper behavior at mini shows -- lighten up people, use your common sense and approach with a friendly smile. Try it, you might like it. Ann Kozlik |
Visible Prices on miniatures: I'll add my two cents on miniatures without visible prices. Many years ago, I had a friend who worked at a furniture store that did not have prices on the furniture. The reason was so the salesman could quote a price that he thought the customer would pay--well above the so-called retail price. If the customer wouldn't buy, then the salesman would have a line about a one-day sale or such and give a lower price. To this day, I assume that if a item isn't priced, the dealer has different prices for different customers. For those who don't know me, I have had tables at miniature shows since 1984. If there are dealers on small stuff who do not have prices on their miniatures, it would be interesting to know their reasons. Don't email me, post it to the board as I'm sure the other readers would like to know. Dean Jenson |
| Previous 10 | Next 10 Page 805 of 1032. Total links in database: 10312. |
|
Browse the database (all entries) |