Hanging Wire Baskets: I just recently experimented trying to make wire baskets, and they turned out quite well, after a lot of trial and error. Cut 4 pieces of wire. Make an + with them and solder where the two wires meet. Then lay the other two wires on top to make an X and solder them. Now, put your bead in the center and draw up the wires around it. Because you are soldering, don't use a porcelain bead, and maybe not a marble, because they absorb the heat and the solder won't take. I used a wooden bead and it worked fine. Now you want to solder circles of wire going around the bead. When you've got it as big as you want it, solder another wire next to the top one so that you have a double ring. The leftover wire can now be twisted together and formed into a loop or hook at the top for hanging. Make all your flowers first before you do this next step. To plant your "goodies", I first filled the basket with floral clay. I then chopped up some moss so that it was fine, and put glue on the outside of the basket, in between the little squares, and glued the moss to it. Then I poked my vines, flowers, etc. into the little squares, leaving some of the moss showing, and covered the top of the floral clay with used dried coffee and did my 'main' display of flowers. Carol Jones (Jonesy) |
Hanging baskets: I made my hanging baskets out of Aida cloth. I just put cling wrap around some lids, spread glue on the Aida and molded it around the lids and let it dry and then I neatened them up. I then painted them green. I also use chain to hang my baskets because you can count the links and get them even. I just put a jump ring where I wanted the chains and used another one to join the chains and hang the baskets. Raeleyne, New Zealand |
Hanging Pots: In some cases you may not need an actual pot at all, e.g., for a container covered in impatiens. Pick a form of the right size (bead; section of dowel, Sculpey, etc.) Color bottom, attach hanging threads, and hide the rest in greenery and blossoms. Suggestion: make sure there's enough weight to let the pot hang naturally. Mary (Oregon) |
Hanging Baskets: Have you tried to use the small wooden bowls you can pick up at Hobby Lobby? I think you could use a Dremel tool to drill out the holes for the wires. I would use silver metallic thread for the wire too, as it can be tied easier and doesn't kink up like wire does. Think I would add a small drop of thick glue to each knot so as not to come untied and spill dirt and lovely flowers all over the place. Then, again, it would resemble my botched trials (more like errors) of the real thing. If you insist on using Fimo for the baskets, try something round that is bigger than a marble......hmm, I see a new topic clicking away in all mini minds! And by the way, who says it has to be round? There are so many unique and unusual shapes in gardening these days. Or what about using toothpaste lids, water bottle lids, syrup lids,....well you get the idea, now let us know what your success story is!! Lisa Lynn |
Hanging Baskets: A while back, Jean posted about a hundred different things to make from those papier-mache egg cartons--I wondered if hanging baskets couldn't be done from them? Susan at The White Rabbit's House |
Hanging Baskets: I have used the small wooden bowls from Michael's for hanging baskets, but didn't drill holes in them for the hangers. I just used very fine wire and twisted the top of the wires together, bent a little hook in it and then attached the wire with Super Gel Glue. Carol Pierce in TN |
Hanging baskets: Instead of a marble, which doesn't give you the depth you need, try using a thimble or the end of a large magic marker as your form for the Fimo. Even simpler, buy the small wooden pots (like 30/pkg for 3.99) and paint them with terra cotta paint to look like clay. To get the wires the same length, form your hanger first so you know it's even, and then put it on the pot. Or make a simple macramé one. Rose Stout in Hawaii |
Hanging baskets; I have used the metal part from a champagne bottle; the part that prevents the lid from popping off. Sorry I don't have the exact name for it...but you know what I mean. And don't think you'll have to buy an expensive bottle of Moet Chandon: a cheap bottle of bubbly wine comes with the same type of lid. Anyway: you join the four iron ends together and bind them together with a piece if metal thread or, more sophisticated, try to join the four ends in a small ring (I did not make it.) Then,attach a piece of mini chain and fill it with whatever-you-want. This is how I made a basket years ago. This is an easy one for the beginner. Now I would prefer the more realistic looking ways. I loved the idea of just decorating a Styrofoam ball with green hanging stuff; it's true: the baskets are supposed to be invisible! The plants are the part that makes the show! Hanging Plants: You could easily make those white wire baskets that are popular using that new craft wire (primarily sold for making wire jewelry now.) It comes in various thicknesses on small spools and I know I've seen it in white! Wendy Roberts |
I have made hanging planters from the small cream cups they give you at the cafes. I use embroidery yarn (small size) to make the hangers. Mary K |
Pots The hardware store has small coiled wire "objects" I guess, for want of a better description. They are used to cushion the side of cabinet doors so they don't mar the inside wood when you shut the door. They are perfect outdoor pots - they come very small to very large and are very reasonably priced. They can be painted or spray painted and then hung with thin wire, hooked at the top. A little inside moss, plop a plant on top and viola! They can be pulled or squished to size. Kathy Ostrander |
| Previous 10 | Next 10 Page 808 of 1032. Total links in database: 10312. |
|
Browse the database (all entries) |