Lightweight Landscape: Use a Styrofoam base. For hills, use smaller chunks of Styrofoam or wads of newspaper. Cover the hills with Plaster Cloth. (Call 1-800-234-9995 if you don't have a model railroad store in your area). It's very easy to use; cut a strip of Plaster Cloth, dip it in water, and lay it on your base. Smooth it with a wet finger. After it dries, you can spray it with adhesive and sprinkle Woodland Scenics (also available at the same places as Plaster Cloth) over it. You want the 'fine' texture for grass; the coarse texture makes great shrubs. Just grab a clump and place it where you want a shrub. Looks great next to the house!! Allen |
Creating Hills: You can use blue insulation board that is available from home building centers such as Home Depot, Lowe's, etc. It is easy to cut and bevel with a knife. Several layers will create all the hills you might want. Sue |
Bunka Flowers: Actually, it's not so much a pattern you need, as a general shape. The first example I ever saw (don't remember whose) was a string of unraveled bunka wrapped several times around a thin cone of sculpey, for a lilac. A hyacinth was made by wrapping several layers directly around the stem wire; a chrysanthemum-type by shaping and gluing a disc onto the stem. (For this last, I think it's easiest to punch or cut a round of green paper, cup it slightly, then coil and glue the bunka onto that, hiding the green. You might prefer working with bunka that you've stiffened first (this gets rid of some of the rayon shine, too). Stick a couple of bamboo skewers a few inches apart in a block of styrofoam, fix a piece of double-face tape down the length of each, and string unraveled bunka loosely between the two. Then spray several coats of acrylic matte medium. Cut into short lengths to glue crosswise on a stem (the way wood hyacinths grow). Or into crispy snippets that you might - for example - sprinkle onto a glue-covered disc or dip a glue-covered stem into. Something I've been musing about: for lilacs, wisteria, etc., might one get an airier effect by wrapping a bit of green bunka onto a stem, then piling colored on top of that? You can work with more than one color. You can also add color with permanent felt-tips, etc. Mary (Oregon) |
Babys Breath: A small white flower that usually grows in big bushes along roadsides. Well at least they do here in Southern Idaho. Here they are ready to pick around middle of June or early July. I have used these a lot. You can bring them home and leave to rest, not dry, for a day or so. Then spray paint them any color you want.. They hold up beautifully. I have some that are 6 years old in my mini planters and they still look like the day I put them in. Winnie |
Bedding: I use sheets of floral foam as a base for gardening (from Old Time Pottery). Not expensive, easy to sculpt contours, even with a dull knife. To protect the underside and edges from dents, tacky-glue on a layer of poster board onto which you can apply rock pattern paper (run a fence or pebble edging along the perimeter to cover). Very light, and easy to "plant" -- just stick plants directly into it. Loretta |
Plaster cloth for landscaping: If you can't find plaster cloth, sometimes marketed as Rigid Wrap, also as landscape cloth, you can make your own... messy but it works. Mix up a goodly batch of plaster of Paris to the consistency of cream. Dip in some loose weave fabric such as cheese cloth, very light weight cottons, etc. Squish it out and apply. I usually add a good dollop of Weldbond glue or Elmer's glue to the water before adding the plaster for a bit of extra strength but most don't bother... much less expensive and generally stronger than regular plaster cloth. You can also use slightly watered Elmer's Glue (not school glue) and fabric and it will do a wonderful job. If you can get the book "A Simple Screamer" you can see some wild and wonderful pictures done with glue and fabric mache as they call it. Sorry, don't have the author's name as my book is out on loan at the moment. Sammy |
Landscaping Materials: Recently I was faced with a dilemma while trying to complete landscaping on my log cabin project. I needed A LOT of pine or spruce trees to dot the landscape and surround the waterfall and stream beside the cabin and I needed them to be cheap and I needed them NOW. I went digging in my craft closet and found some Lemax snow flocked evergreen trees I purchased after Christmas which I was planning to decorate as Christmas trees for my dollhouses for next year. Since they were so inexpensive, I decided to try my hand at spray painting them a spruce green color, and much to my surprise, they turned out fantastic! They looked so great that I decided I needed many more than I had on hand so I located the Lemax website and purchased more trees from it. If you need trees, you might want to check it out: <A HREF="http://www.collectorsite.com/lemax/index.html">LemaxHome</A> I combined the evergreen trees with fall aspen trees from Art Smith Productions (Landscape Magic) and my project is beautiful! I've also located another source for great trees although on a smaller scale for model railroaders: http://www.modelrailroadshopper.com/general/scenery_ads.html These are a couple of reliable and unusual sources for landscaping materials. Kathy in TX |
Stone Enclosures: When making a stone wall or enclosure of small stones for a pond, there are spaces between the small stones that are being glued one on top of the other to make the wall for "water" containment or a stone fence etc. I filled in these spaces after the glue dried; with air curing clay. Materials; air drying clay, cup of water, a "pusher" like a nail with a small head. You hold the shank and push the clay with the head of a paint brush, perhaps 1/4" wide. Procedure; Take a small piece of clay that will be able to fit into the opening you wish to fill. Wet it with water from the paint brush. Gently push it into the opening. Use the "pusher" to tamp it into place a bit more securely. Now, wet the brush and just wipe the clay and spread it as you brush it with the wet brush. Blend the clay into the crevices with the wet paint brush. Hides the holes and the glue and looks good. Bob in Hollywood, FL |
Lawn Sprinkler: I'd start by making the base from a bit of green aluminum can. Do you drink Mountain Dew? Use tin snips or VERY old scissors (your mom will cut you out of her will if you get into the sewing box!) to cut a piece of metal the appropriate size from the can. The base isn't solid, but I think I'd paint the 'holes' black, rather than trying to cut them out. When it's dry, use a fine nail to poke a hole in the center for the 'spinner', and round the base by pressing it around a film container or large pill bottle. Maybe a bit of wire coat hanger, bent to shape with pliers for the spinner part? A length of fine wire, wrapped around the spinner, threaded thru a small bead and then fastened off on the underside of the base ought to do the trick, and with a flick of your finger, I think it would actually whirl around. If you want a connector on the side, then glue on a larger brass colored bead - might be a good idea, if you can do it, to include a little tab on the center of one side, and after you have rounded the base, fold the tab down so you'll have a place to glue the bead. Dani |
Cats in doll houses: I have had my kitties trying to move in my doll house to. I got clear plastic from Wal-Mart ( in the fabric Dept.) cut it to the size of the opening and use upholstery tacks to hold the top part and Velcro to hold the sides. When ever my darling's try to get inside, I squall a loud "NO" AND CLAP MY HANDS. They get the message. With the Velcro on the sides I have easy access to the inside when I need it. Pat Thompson |
| Previous 10 | Next 10 Page 812 of 1032. Total links in database: 10312. |
|
Browse the database (all entries) |