"Crows feet" is the common name of a plant. It is also call "Lycopodium" – any of a genus of plants, the club mosses, erect or creeping, with evergreen leaves. (Webster.)

This plant's structure looks like tree branches in miniature. It resembles some types of spruce or fir trees. After processing (some mini shops sell bags already processed, some florists sell live stuff) pieces can be glued into a base of styrofoam or one of the sissal trees found in craft stores and seen more commonly around Christmas time. There are no steadfast rules! But the results are pretty darn cool. I used a 6" sissal base. Now all I need to do is decorate it.!

Marcy


These addresses are out of the Spanish Miniature magazine, I can't speak Spanish but the mag is full of how to's plus antiques and big dolls.

Las Casas de ANA
Apdo. de Correos 252
28400-Collard Villalba Madrid

Multicolor C/Arenal, 3
28013 Madrid ELFO
Abierto de Lunes a Sabado
C/Argentina 5 280127 Madrid

http://www.intenova.es

Asi Colection
Gran Via 47
Arenal 20
Bravo Murillo, 194 Principe de Vergara, 12
Madrid. kk

Hobby Poly
Po. Alberto Palacios, 42
Madrid

I hope these will help....One girl from our mini club went to Madrid last October and said the minis were expensive compared to UK. So she did not buy anything, went and treated herself to jewelry instead!

Hazel Dowd


Paint for plants: The process originated with our wonderful Joann Swanson, I just adapted it for my purposes.  You can use the same technique to make flowers.  Just shape the thin "petals" around tiny beads.  I've made some fairly decent roses and other blooms which, I decided, needed no specific identification.  I am not in the same league as those talented folks who make such incredibly realistic blossoms with paper and silk.  Most of my gardens are never-were blooms on none-such plants. 

Wanna


I have the Morse book written many years ago about Japanese houses - exterior and interior - and it is an excellent resource for anyone doing a Japanese mini. I have a Tea House that I need to complete one of these years, which I why I bought it last year. It is in paperback for around $10.00 or $15.00.

Jeanette


Making of thin petals etc.: Has anyone tried using Teflon instead of glass? Like one of those fry pans that got steel-wooled by mistake by a husband like me VBG.

Bob


Plants: Try looking at plant-and-seed catalogs for drawings of sample gardens - not much detail, just colorful overall impressions - some tall spikey plants in the back. Some low fluffy-looking things in front, etc. And then instead of making yourself crazy trying to replicate the details of gladioli or whatever is pictured,just go for the same general effect using the materials, ideas, and skills you have on hand. The more you play with this stuff the closer you can get to "real" plants.

If anybody's browsing seed catalogs with real-life gardening in mind, take a look at feverfew. It's one of the chrysanthemum families, with lacy vivid green leaves and many very small white daisy-type flowers. Grows easily, makes wonderful nosegays, self-sows but pulls up easily. Let it go to seed and the dried calyxes look like short-petalled daisies with big black centers. Mediocre - but turn them over and they look like densely petalled blossoms, ready-to-paint.

Mary


Lavender: Take a 1 or 1-1/2 inch Styrofoam ball, and cut a slice of about one third of it off, and paint the curved part of the slice's surface dark green. Coat the surface with glue, and take some dark green shredded railroad foam and sprinkle the foam all over the surface. If you have a bamboo skewer handy very carefully split it. You are aiming for thin slivers....

Cut the slivers into pieces about 1 - 1-1/2 inch long, and paint them dark green to match the foam. On one end, coat it with glue, and sprinkle on some medium railroad ballast, and when it's dry, paint the ballast lavender color. Trim so they're random lengths. Stick the dried stems into the foam covered ball, kind of bunching them together in the top middle of the ball.

Karen Isaacson


Lilacs: You will need bunka in dark purple, medium purple, light purple, white or any other colors that fall in the lilac color family. Unravel about 6 inches of each color bunka, and snip each strand into little bits (about 1/8 inch long or less). Mix some of the dark purple and a little of each the other purples you have, and do the same for each of the other colors. Lilacs aren't all one color; you'll find shades of purple...

Make some long cones of Fimo, and use some florist's green wire as stems in the wide end of the cones. Bake according to the package directions, and paint dark green when cooled (you can daub some purple on them too if you want). Coat a cone with glue, and sprinkle the bunka mix over the cone, patting the bunka bits in here and there. If you miss a spot, you can go back later and put more on...

Fill a pot with self-drying clay, and 'plant' your stems. Cut some florist's tape into leaves and put the stems in the clay. Daub some glue on the surface of the clay when it's dry, and sprinkle on some railroad ballast or dried coffee grounds (you want to simulate dirt), and you have lilacs. You can also put the stems in a vase with some other flowers as well.

Karen Isaacson


Ornamental Cabbage: Pour separate small amounts of purple (or mix your own), pale green and cream acrylic craft paint into a shallow container. To each color add a bit of water, enough to thin it but not be too runny. Put very thin little splotches on a piece of glass or ceramic tile and let dry. Using your knife, gently lift the paint from the glass, stretching, ruffling and curling it as you do.

Starting with the cream, then the green, then the purple, cover, then layer the dried paint around a small bead, continuing to pull and fiddle with the edges til they are very ruffly. Some were just darker to lighter in each shade. Cabbages going to seed get taller and more spindly, so you might experiment making some spikier. I also tried using curled bunka, but the colors were not as realistic as the paint which I could thin and mix.

Wanna


Ponds: Start with a large jar lid, preferably one with smooth sides and as large as you can get.

Paint the insides dirty brown and green. Make the middle darker and don't make the colors even... When it's dry, fill with resin.

If you want to set the pond flush with the ground, cut a hole in your surface the diameter of the lid, and glue it in. If you want to have an above ground pond, cover the sides of the lid with bricks cut to the height of the pond side. Put cut side down (to hide the cut), after you paint the outside of the lid with dark brown or black paint. They won't cover all around, but get them close together and straight up and down, and you can get some colored grout (like for tile) and carefully fill in between, then glue bricks around the top edge, in a starburst pattern. You can also use rocks, like slate, but they're not as even as the bricks, unless you have some of that stuff used for rocks from Department 56 that you can paint up.

If you glued the pond flush with the ground, then take some slate pieces or some fairly flat rocks and glue them around the top edge, overlapping the "water" a bit, and make them irregular, like in nature. Glue some tiny bits of moss (the stuff that's like lotus vine, pulled apart into little bits, and the other stuff that looks like underwater plants) around here and there.

If you then take some green Fimo and make a rough, broad heart shape about 1-2" wide, with leaf markings, you have a water lily leaf; then take one of those dyed straw flowers, and glue it on the surface of the water along with the leaf and you have a water lily...

Take thin slivers of bamboo (take a chopstick and cut 2, 2-1/2 and 3" pieces) and dye them in some tea (just soak) or use a brownish wash with a bit of green. When dry, coat one end (but not out to the very tip) with glue, and sprinkle on some HO railroad ballast in dark brown into the glue. Now you have some cattails. Mix lengths, and glue them in groups around your pond.

Take some large pine needles (the kind that are about 2 or more inches in length) and dry them out. When they're dry, paint them with dark green paint, and cut the pointed ends off about 1 -1/2 in length, and glue them in clumps around the edge of your pond. Now you have reeds.

Karen Isaacson


Previous 10 | Next 10


Page 822 of 1032.

Total links in database: 10312.



Search for:


Browse the database (all entries)