Flour & Doughnuts: For flour, I just rubbed a piece of white chalk on a piece of paper, voila, instant flour. For the doughnuts, I used air drying clay and rolled it out to just a little short of 1/8". Cut them out using a pen barrel for the outside and an empty pen refill to cut the holes. Then when there are dry, paint the tops and bottoms of each with a golden brown, and a strip around the middle a cream color. You can make jam busters or bismarks by not cutting out the inside and rounding them a little bit on top. Don't forget to put that little spot where the filling oozed out just a little. Want to make one with a bite out of it, use the pen refill to cut out a hole in the side. Paint the inside a yellow-cream for the doughnut and the same with the jam buster with the jelly filling showing too. If you want to make cream puffs, roll out your dough about 1/16" and cut it with the pen barrel. Paint to match the color of the ones in the store. Put some of the snow that is used for ceramics in-between two of the circles so that it squeezes out just a little. You can glaze the doughnuts chocolate (a little brown), maple glaze I clear (clear acrylic glaze).

Sandi


Flour: I know that professional mini food makers in GB use talc to represent flour. They say using real flour looks too bulky in mini, and that talc looks more realistic. I assume that talc smell goes away.

Helen


Flour & Doughnuts: Have you considered using baking powder for your flour? It is finer than flour and I've never found bugs in mine! (Thank Joanne Swanson for that tip; I read it in Nutshell News.) I generally take the coward's way out when it comes to donuts and use Cheerios or some other "O" shaped cereal. I use paint for icing - chocolate, strawberry, or plain. After I have them piled on the plate, I coat them with clear nail polish. I haven't tried the powdered sugar kind; I think the baking powder would melt in the paint - or bubble up, worse yet!

Dani


Flour & Sugar: Concerning the flour and sugar issue: I use baby powder for flour and fine white craft sand for sugar.

Laurie


Sugar: For sugar on donuts, use very fine glitter for granulated sugar, or sand for cinnamon sugar.

Marsha Heeter


Flour & Sugar: Talcum powder makes good flour and salt has small crystals and substitutes for sugar (salt doesn't go "bad" does it?).

Liz


Flour & Sugar: I try to stay clear of organic stuff as much as possible - I'm always nervous about critters or just decomposing after so many years... we want our minis to be passed down! I'd use talc (baby powder) for flour, and try mixing some ultra fine glitter with white sand. (The sand would be called "play sand" here in the US - clean stuff for sand boxes, or white craft sand in the hobby shop). Salt might work for sugar too, but if you are in a very humid location it could react to glues or furniture surfaces.

Beverly Michie


Flour & Sugar: Baking Soda is good for flour, and sprinkled as snow on porches; also for powdered sugar on donuts and pastries.

Maria


Mini Show Manners:

I have an "open table". Most of the things I sell (except for the very expensive items) are out in the open for people to touch, pick up, play with, and look at the price without having to ask. I think that this is very good for business and makes it more fun for the customers but it does have it's down side. I will skip shoplifting and price tag switching because that's stating the obvious. Some of the things I sell such as perfume bottles with tops or small delicate pieces are in small plastic containers. Don't open them without asking. The seller may prefer to open it themselves so that if the stopper to the perfume gets lost you won't be publicly beaten :-)

Don't block a table conversing with friends. I may get flak for this one, but sellers and buyers have about 6 hours to shop or make a profit. Blocking a table prevents customers from buying which annoys both the customers and the sellers. If you want to talk to friends go outside the sales room or in a corner out of people's way.

Be patient. If there's a line to pay, please wait your turn. If I'm helping a customer, I don't like being interrupted because not only is it rude, but I lose my train of thought (not hard these days), and it's unfair to the other customers. It's especially important not to interrupt while the seller is adding up a sale.

Don't ask for a discount. I give my "speech" which makes people very sorry they asked. The speech covers topics such as the expense and time involved doing a show. My prices are fair. If you go into a department store, do you ask the manager for a discount? If you ask for a senior citizen discount I will point to my husband and ask if he should charge extra because he's a senior citizen (I refuse to accept being a senior citizen).

Kids - I will put my 2 cents in about kids here as I saw another discussion going on this topic. I have on occasion given a kid my "look" which usually sends them running or have asked them to stop attempting to break something. I've also said the same thing to adults. What I have for sale on my table are not samples, it's the merchandise that other people will buy. Most of the pieces I sell are not intended for young children. A number of shows have children's tables with things appropriate for kids and at a price they can afford which is a great idea. That way they can truly participate.

The above comments are common sense. There are no special rules for shows.

Shows are a lot of fun. You get to meet with other people with the same interest as you. You get to see wonderful miniatures. You get the glorious feeling of guilt at having gone overboard. And you get to bring home neat stuff to enjoy for many years.

Carol, S P Miniatures


Bunkum. oakum? For log cabins. Here in the US we have a substance called oakum which I'm sure is the same thing as bunkum. It is oiled (tarred) hemp fiber that is used for caulking boats and in plumbing. In the navies of the world it was used on the old wood decked ships to pound into the seams of the deck (and hulls) to seal them up. It was also used in a tight twine to wrap life lines before wrapping them with canvas. In plumbing it is uses to pound into the bell of a cast iron pipe joint before melted lead is poured in to make the joint tight and secure. You can still buy it at hardware stores in a little coiled rope about 1/8" in diameter for wrapping old faucet stems as a packing. If you want to use it for miniatures don't get the product that has lead or graphite mixed in it. It is messy and hard to use for minis.

Bill Hudson


Previous 10 | Next 10


Page 824 of 1032.

Total links in database: 10312.



Search for:


Browse the database (all entries)