Mulch: Here is the secret to make sawdust useable. Fill a 1 gallon ziplock bag 1/2 full then add about 1/2 cup stain (I use water based) and squish and squash it around. When throughly mixed pour on counter to dry completely. The stain makes it look real-I don't know why- I use it for sawdust floors for my woodland creations, and mulch in landscaping projects. THE BUG |
Tile roofs: I used corrugated cardboard with pleasing results. Dr Bob |
Grass: I learned a wonderful technique taking Braxton Payne's 1/4" scale English Manor Greenhouse at Nationals a few years ago. In applying the loose green foam/grass, instead of putting down glue, instead paint a heavy wet coat of brown paint and then quickly sprinkle the grass. Be sure to mix several shades of the green together to give it a more realistic look. That way, with the brown paint rather than glue, if some doesn't stick or isn't as heavy, it will look like dirt showing through. Jo |
Foam core for building: I do not know what size your scene is. If it is larger than a standard sheet of paper I strongly recommend you reinforce it. You may gently insert rods made of wire coat hangers or glue a wood cross brace to the underside or frame the piece (see #3). I remind you that we live in Florida and foamcore absorbs moisture. Please reinforce so your project does not warp. Edges may be finished by sealing with caulk applied directly from the caulking gun and smoothed with a putty knife-lightly sand when dry-stain or paint as desired or glue a coat of the same groundcover you are using in your scene. I do not recommend hot glue for the edges of foamcore. It will melt the foam and damage the strength of your edges. When building architectural models, we simply seal the edge with a thin strip of poster board. I often use picture frame molding. This makes a great "frame" that makes it easier to pick up the piece and move it. Becky |
Foam: When joining two pieces of foam core glue together then use sewing pins to clamp it. Don't use the sewing pins with glass heads as when the project is dry you pull the pins out and if you use the glass head pins the glass head comes off. Karen Hill |
Cutting Foamcore: Use a sharp blade in a utility knife. Use a steel straight edge and make the cut three times. The first cut is a light score just through the top paper. The second cut a little deeper, the third cut deep enough to cut through the bottom paper. Make your cuts on a surface of matboard, cardboard or glass. Never on wood, carpet or countertop. You should end up with a perfect smooth edge. If your foamcore is 1/2 inch or more use more cuts to get through the board. Happy cutting. Colette, North Carolina |
Cutting Foamcore: you might want to try some saber saw blades from Sears. I bought some recently, but have not had the opportunity to use them yet. They are like knives - just a sharp edge, - no teeth and are made like a regular saber blade. They suggest using them on foam board and wall board. Real inexpensive - under two fingers! I have also cut the "board" with a hollow ground planer blade on the table saw, but even then there are some jaggies - more like fuzz to smooth out. I had fair luck with an emery board, but ran it lightly across the edge, working from top to bottom instead of running straight down the edge. I have had good luck sealing the edges with white glue. I spread a fairly thick, smooth coat on the edges, let it dry and sometimes come back with a second coat. Lynn K. Kuhnert |
Foamcore edges: The best way I have found of tidying the cut edges of foamcore is to glue a strip of light weigh card around the edge. use tacky glue, some craft clues will melt the polystyrene. If you are clever when you cut the foamcore you can cut thru one layer of the paper and the foam in one place, then a little further along cut right thru the 3 layers. Then peel one layer of paper and the foam off the other paper and then fold that piece of paper up so you are covering the cut foam with the same paper that covers the rest of your foam core. This makes a really neat finish with only one cut edge (the other being a fold. Sandra Monk |
Easy Fringed Leaves: In mini-gardening, if you take care of the leaves, the flowers will pretty much take care of themselves. If you don't mind cheating a bit, there's an easy and relatively fast method for scads of house and garden plants that have a rosette of narrow, longish pointed leaves such as spider plants, wood hyacinths, daylilies, Siberian iris, ponytails, some palms, etc. You can make some flowers the same way. No talent required! Basically, you make a fringe from paper, scissor-snip pointed ends, fold a narrow margin, and roll the whole thing up. Variations come from paper color and weight, length and width of individual leaves, and shaping. To experiment, take a quarter-sheet of paper. Draw a line about an inch from one edge, perpendicular to the grain of the paper. This'll make leaves about an inch long. With the back of a blade, score another line about one-eighth inch behind it; later you'll fold here. Put a sharp new blade in your craft knife and make a cut from the penciled line to the edge of the paper. Do a second cut close to this, and so on - in other words, make a fringe. As you play with this, it gets easier and easier to keep the cuts straight and pretty much the same size. Won't hurt if there are little gaps where you remove a piece that's way too narrow. Now fold along the line you scored; unfold; and cut the fringed strip free about a quarter-inch from the fold line. Take small thin scissors and - here's the cheat- cut points from one edge of each leaf diagonally down to the other side. Is that totally obscure? I mean, instead of the points being in the middle of each leaf, it's on one side, requiring only one snip instead of two - and if the leaves are narrow and plentiful you can get away with this. Then fold up the hem and, with this on the inside, glue fringe to a stub of toothpick or stout wire and roll it up, adding glue as needed. You can curl the leaves by stripping them between your thumb and a dull blade. If the plant looks top-heavy, try thickening the base by allowing more hem and folding it several times. For a sort of "fountain" effect, wind the fringe diagonally down the toothpick. Or start with a wedge-shape bit of paper, and have shorter leaves growing around the outside edges of plant. Mary |
Paper plants and flowers: I use any kind of paper I find- tissue,crepe, writing, envelopes, packing, and the list is only as small as your imagination. Each paper seems to have a flower it lends itself to, so I experiment a lot. Sometimes a stiffer paper holds its shape better when you want to curl the petals. Jeannine |
| Previous 10 | Next 10 Page 825 of 1032. Total links in database: 10312. |
|
Browse the database (all entries) |