log cabin "chinks"--I just finished a small log cabin and had the same problem--daylight (and mini drafts)! As I started with an assembled kit, sealed in light wood with glue already in the cracks that would not"take" the furniture stain that I used on the rest of the exterior; I tried acrylic paints (bit of green and dark brown mixed) with some white glue and used coffee grounds "painted" into the chinks with a small brush fully loaded. It not only filled the cracks and covered the light spots, but gave a convincing look to the "mud". I took my finger after filling the cracks to smooth the stuff and remove excess from the logs. Any color that strayed was easily rubbed into the wood as it was close to the other stain in color. You could probably use spent tea, also--something to give it texture and covering quality. I was happy with the results. I am using oiled parchment on the one window, in a frame that will open "out" for a full view of the "lake and the mountains"--which are on a piece of oil painting cut from its frame and standing on a backdrop behind the cabin. Xmas Carol |
Fimo canes: I believe the person you're thinking about is Donna Smolik. Her site is: http://home.flash.net/~wolfes You can E-mail her at wolfe@brigadoon.com.> Sue in Ct |
Foam Core: I built a 2 story dollhouse for my daughter over 20 years ago before I was ever into miniatures. It was a simplicity pattern that I used in conjunction with real good toys. That dollhouse lasted through her and countless # of friends playing with it over several years, and then when she grew out of it I took it over and put it in our living room and changed it and added to it over the next several years. Even added a 3rd floor to it. It held up beautifully. I also use foam core exclusively to build my room boxes. Kathy |
For lawns: The easiest things are the "grasspaper" made for railroad layouts and the one for minis that is on 1/4" thick foam. If you are going to want to "plant" things, use a layer of foam core under the "grass." Beth |
Sidewalks: To make a realistic sidewalk, you can use real repair-type cement and mix some regular white glue into it...according to Noel Thomas! Roz |
Sidewalks: I used lightweight spackle (make lines while it is wet) and painted it a light gray color when dry. Easy to work with and it looks great when finished. Spackle also works great for that stucco look on houses. Terri Young |
Water: I am using a Plastic Water (comes in a sheet and is blue) that Plastruct puts out. You can get calm water, choppy water or stormy water. It cuts pretty well with scissors. I think they even make waterfalls. It can be purchased at some Hobby Stores or ordered direct from Plastruct. A sheet 7" x 11-3/4" sells for 7.50 for the calm water and 6.50 for stormy water. It can also be purchased clear. Betty Martin |
Wood hardener: I first asked about Minwax's wood hardener because someone mentioned using it when working with "found" wood like driftwood or interesting-shaped roots. But when I spoke to people at the Durham Wood Show Minwax stand, they said carvers used it to strengthen wood for carving fine details like feathers. I need something like that for my wooden peg dolls. I can make them down to about 1 1/4 inches high quite easily, but when I go below that, no matter what wood I try, the joints get very fragile. I'm down to about 1/64 inch thick wood for each piece. So the hardener might work. Apparently you mix it 50-50 with acetone. It's available at Home Depot. To save anyone else trying somewhere smaller, Home Hardware as a group don't carry it and won't order it. Frances |
IN PRAISE OF THE LOWLY YARDSTICK!!! Consider the poor thing. It gets left out in the weather, hung in the hot stuffy garage for years, propped behind the refrigerator, left lying on the cement blocks outside for weeks at a time, used to retrieve lost items from beneath the bed - fridge- couch- car..... it is a most versatile and under appreciated item in our house. Does it warp? no Does it twist and bend with moisture? no. Does it rot? no. How many years has it stood, silent and neglected without visible change? It's made of wood my dearies.... excellent wood, Great wood! Thin pine usually, HOBBY WOOD!!!! I've been cutting and using yardsticks for years for mini building. . . all the qualities mentioned above are inherent in this often overlooked source of excellent wood for hobby builders. A saw and a handful of cheap yardsticks can make you a master of all you aspire to in the mini world. Windows, Doors, framing, furniture, plank floors, house trim, etc. I found a hundred of them at a yard sale for .05 each. Find THAT in a hobby store. A light sanding to take the numbers off and you have one of the finest quality hobby wood planks you can imagine. They paint, sand, stain, glue and cut like a dream. . . Judie - Daytona Beach, FL |
Building With Foamcore: I have built a 3-story house with 1/2 inch foamcore, and it is very solid. It is finished with wooden clapboard siding, shingles, hardwood floors, etc. Even with all that weight, it is extremely sturdy. I used a couple of techniques which worked well for me. For gluing along the corner seams I used a product called "Glue Screws" that I found at K-Mart. I also used wide packing tape to be sure the seams were tight and there was a good even bond. In addition, after gluing, I used nails, about 2" long, dipped in white glue which were inserted every 4" or so. That probably wasn't necessary, but since this was my first effort I wanted to be extra-certain of stability. The foamcore I buy is 20" x 30". Where I needed to join 2 pieces of foamcore side by side to make a larger "slab" (for my floor base and front of the house which is wider than 20") I used the Glue Screws along the edge, and then also used"biscuits" (similar to what Norm uses on "This Old House" all the time). I used thin pieces of wood (1/8" or so thick and about 1/2" wide x 1" long) and cut a slot into the edge of the foamcore with a razor knife. Then I squeezed glue into each slot and inserted the biscuit into one slot and slid the other piece up to it making sure the biscuit went into the slot. Do a dry-fit of this before messing with all the glue! Leave it flat until the glue dries, and you have a nice even sheet of foamcore, but in the larger size you need. You can also cover the seam with a nice wide piece of thin tape, like packing tape for added insurance. Inside the house, the walls are 1/2" foam, too, but I did use a couple pieces of gator foam in a wall near the center on each floor, just because it is extra strong and I wanted to be sure nothing sagged. You can also use a structural beam of sorts (1/2 square or so) here and there if you can fit them someplace that won't be too obvious. I'm thrilled with the results and am working on another structure right now. Karen Golomb |
| Previous 10 | Next 10 Page 827 of 1032. Total links in database: 10312. |
|
Browse the database (all entries) |