Garden Vegetables:. The best booklet I ever bought for making fruits and vegetables was "Bread Dough Fruits and Vegetables" by Barbara Meyer. I don't know if it's still in print - I bought mine over 15 years ago. I don't use bread dough - I use polymer clay - but the basic "how-tos" are fantastic for beginner or more advanced. Beverly Michie |
Free Flooring: The lumber yard gets some of their shipments in crates made with thin Luan ply. I was looking for something like that when my dog shredded a bathroom door, and the guys said they usually toss it and gave me a large, slightly damaged sheet. I was able to repair the door, and saved the shredded veneer. I cut strips on the band saw, staggered the planks, used wood filler with some lamp black in it, sanded it, and coated it with Minwax. It looks just like aged flooring and was not really too much work. Jacqui Marlin |
Wood and glue: What is liquid nails? For most of my furniture I use a BOND Squeezable Tacky glue I purchase at Earth and Tree. It bonds quickly and seems strong. For my flooring I use Quick Grab. It can be messy, smells but I find it does indeed grab quickly. I also use it for siding. For my hearths and bricks, I use BOND 484 TACKY extra thick white cement. It is kinda like a silicon cement in that it does not get brittle. I had it recommended for flooring but the moisture content warps quickly. The answer I was told was to use weight. I don't agree with that. My tactic is use a glue that has minimal warpage on large areas to be covered. My guess is that if you are a piece of wood and you are destined to be a stir stick, or Popsicle stick, then that is all you're good for. When you make a basket out of these (did when I was a kid) warping was not a problem because you used a small amount of glue in a concentrated area. When flooring and siding, the amount of glue will cause these woods to cup. I use a lot of apple and pear wood also. They resist warping well. For pine I use the basswood. Finished correctly, it gives a good pine look. I have a limited amount of old poplar I save for special projects. I often use planks that are 1 1/2 inch or larger for my flooring. I do Early American and I like the wide plank look. That is another reason I say to use wood sheets. You get a piece 3" x 24" and you are not limited by the width or length of your floor planks. I try to offset the joints in a realistic manner. This is hard to do with 6" long sticks. bill |
Seed Packets: Jim Collins has a wonderful site and lots of printables. He even has seed packets for your vegetable garden! I also discovered wonderful Victorian can labels from Fran's Front Porch. You can find the printables at http://www.geocities.com/Heartland/Meadows/1832/ Earlene Lane |
Lightweight Bricks: I think I read the part about using balsa wood for bricks and stone in the tips section of NN or might have been in one of my books. The person used balsa wood (very light) and cut out the shapes, then glued them on. If you base coat the area with a grout colour, that is one step taken care of. I used to think I couldn't do these paint effects either but this is what I would suggest. Mix acrylic paint in several related stone colours. Take a small piece of sponge, maybe a quarter or less the size of the 'stones,' and give each stone one dab of colour, maybe two, depending on size. Then using the same sponge, do the same thing with all of your colours. I did this with cardboard to make 'stone' for the church in the Greenleaf village and it looked very good. If you go out and look at rock, you will see that what seems from a distance to be all one colour is, close up, many colours. If you're working with acrylic paint you know it dries pretty fast so you have to move quickly, no time to worry about mistakes or not getting it right. If you have some that you aren't satisfied with, just dab on some more paint. Using a light hand with a very tiny bit of black or white metallic gives that mica or quartz look. You can also dent the balsa to gave more of a stone texture, especially the sides so that they won't look as if they were cut out of balsa. |
Gutterings and downpipes: The supplier in Australia's email address is warrener@pcug.org.au . They are, and I'm reading from their pamphlet, importers from Great Britain. So for the northern hemisphere people (who stand on our heads) the supplier is JSM Miniatures UK. Moira in Sydney |
Lightweight Bricks: several years ago at a class a person used bass wood cut into brick sizes and then stuck them to masking tape and hung the strips from a hanger, sprayed with paint (could use several colours I guess). When they dried they were removed and glued to a base painted a suitable grout colour and they were very impressive. June Simpson |
Log Cabins: http://rusticreplicas.com/ Someone was interested in Log-Cabin kits. I think that these are reasonably priced and very rustic looking. There are some good Pioneer stories too. Laura Busch in Burnham, PA |
Lightweight Bricks: I've often looked at thin sheets of Styrofoam (they often come as part of packaging) and thought that texture looked very much like bricks. I'm not sure how to make it work: Possibly cut out little rectangles, paint each one, and "lay" them as one would lay bricks. Or.... Score a whole sheet of Styrofoam straight across the sheet... then vertically stagger your score lines to represent bricks. Now paint each one, leaving the scored section white to represent mortar. By the way, I've found that "cutting" Styrofoam with a piece of thread seems to work much better than using a knife. Just hold the thread (one end in each hand) and stretch it across the area to be cut. Then "saw" through the Styrofoam with the thread. Viola |
I've seen a few posts from people about patching boo-boos in wooden pieces. Things like where two pieces had moved apart and there was a gap. The thing that worked for me was to pre-stain the sawdust and let it dry. I tried to use the same kind of wood dust as the wood I was working with, but it's not critical. However, it is better if you use the same color stain as the wood piece is stained with. After it dries, I mix it with tacky glue until I have a paste, then I treat it like spackle or wood filler. I force it into cracks with a palette knife or whatever, let it dry and sand it down. Works like a charm and can't be seen. By the way, I pre-stain the wood piece before repairing because if the raw wood gets glue in it, it won't accept stain. Jeanne, San Anselmo, CA |
| Previous 10 | Next 10 Page 828 of 1032. Total links in database: 10312. |
|
Browse the database (all entries) |