Ivy Leaves: Silverbirch trees' catkins (flower/seed thingie,) when pulled apart, contain mini ivy leaves - honest!

Sandra Monk


I have attached the "grass" that comes from the train shop by applying spray adhesive to the foam core area and sprinkling the "grass" across it. Tip the board and collect into newspaper what didn't stick. Then respray and sprinkle again any bare spots. My "grass" has held up for 4 years (so far).

Barbara Holmen


Resin casting info: Please checkout the products at http://www.smoothon.com. They have a very good white casting resin that is water-thin (no -bubbles) and an easy to use silicone r TV kit that is mixed one to one and doesn't need to be de-aired. They sell both items packed as a sampler. It's a really good deal and it includes a good how-to manual. The previous digest dealt with fireplaces. I've done miniature stonework for about 15 years. Check-out my website at http://www.vintageminiatures.com for samples). For a fireplace, plaster white glued to a wooden block or box, then carved when dry, gives the most realistic effect. It can be textured with a wire brush and carved very accurately with dental tools or chisels. I also like Durham's, but it is hard to work when dry and must be worked quickly even with vinegar or milk added to slow the set-up. An easy material to work with is Das Pronto, an Italian paper clay that air-dries. I roll out an even slab, white glue it to an armature and let it air dry. It carves nicely when hard, but is softer than plaster and somewhat flaky. It can be rolled on a mold for texture and drapes well over odd shapes. Thanks for listening and for the good info I've seen so far.

Mark Motich


Sand: Another choice for white sand is a hobby shop where they have those "sand painting" kits...the type where you pour different layers of sand into a clear vase or jar, and layer the colors. Sometimes you stick brushes in for different "painting" effects. (Often seen at state fairs) Anyhoo, the sand is perfectly white, perfectly clean, and very fine - more "miniature?"

Bill Hudson


Cutting Plexiglas:  I got a Plexiglas cutter at Home Depot - about $5.00 - and it works great.  Makes a very smooth cut.   I am using Plexiglas on the house openings to keep the grandkids' little fingers away.  They have such a hard time not touching.  Hope this means that they will be miniaturists some day!

Carole Pierce


Paper punchers: Wal-mart carries a new line of Fiskars hand punch that comes in different sizes and different kind of punches. I bought one that punches out hearts! I have a small Walmart so I am sure they have a better selection in the bigger stores.

Jennifer


Gallery Glass (by Plaid Enterprises) has a "Bevels Mold," which is a sheet of clear, stout plastic with several circular or rectangular raised patterns. The concept is to coat the patterns with Gallery Glass Window Color, let dry, and then peel off a patterned piece that resembles beveled glass. These are not sized for dollhouses, but I'm pretty sure some of the smallest designs could be used effectively on a window. But the Window Color itself (and that is its name; it's not glass stain) is the real Wow item. It may be cousin to assorted acrylic gels (it has water cleanup) but it dries faster, and to a tougher film, than any of those I'd experimented with. The sample disc I molded is quite clear but, because of unevenness, slightly distorting, which I think is a plus. There are other related items - other Window Colors, leading, pattern booklets, etc. - but I want to try tinting the clear with acrylic paint first, as well as coating the surface with paint and with permanent inks. Worth trying for water. Worth checking to see if it will stretch across small gaps and dry solid. Worth seeing if it can be molded over a shallow bowl. And so on and on! I'd love to know how others have been using it. Oh: where, and how much. I met up with it at a JoAnn's Fabric/Craft store, but Plaid Enterprises is everywhere. The sheet of beveled glass patterns was $3.50, Window Color was $2.00 for a two-oz. bottle, but $5.00 for eight oz.

Mary


Log cabin logs: I've been planning to build a log cabin from scratch for my first dollhouse. I got books on real log cabin design and construction; it's amazing how many different techniques there are to build a cabin. You can use the logs vertically (called 'palisade') or horizontally--or use both together. You can peel the logs or leave the bark on--but the bark encourages bugs and the cabin won't last as long. And there are several ways to notch the logs, and endless ways to chink them (my favorite look is 'chinkless').

The books recommend using 12"-14" diameter logs--that would be 1" to about 1-1/8" sticks or dowels in 1" scale. To figure out how many logs you need, measure the length and height of each wall you're building. If you're using 1" diameter logs, you'll need as many logs as the height of the wall in inches, and each log should be the length of the wall, plus any bit of log you want sticking out at the corners.

So for an 8" high, 20" long wall where you want 1" of log sticking out at each corner, you would need 8 logs (one for each inch of height), each 22" long (20" for the wall, plus two 1" sickouts for the corners). So a four-wall cabin 20" by 30" with 8" walls would need sixteen 22" logs and sixteen 32" logs, plus the shorter logs that form the pointy section of wall supporting the roof peak (is that called a gable wall?)

I've been considering using dowels [because 1) I haven't found any trees available to me with enough of the right size branches, and 2) I don't really want to peel 800+ inches of branches]. But dowels are awfully smooth and milled-looking, so I've been coming up with ideas for making them look like hand-peeled logs. I haven't experimented yet, but will let you know my results when I get that far. I'm thinking of using dowels in a range of diameters--maybe from 7/8" to 1-1/8". I'll stain each dowel brown, then figure out how to scrape off bits along each one, to make it look peeled. (Hand carve them with an exacto? Maybe line up all the dowels together and hit them here and there with a sander? Have to contain the dowels some way so they wouldn't go flying around the room.) Then stain the new bare spots with a yellowish color to look like inner wood. (Stain colors would depend on what kind of tree you're representing.) I suppose I'll have to stain the notches after I cut them, too.

Lee Menconi


If you use OAK dowels and stain them, the graining shows through very nicely. This looks very realistic. Don't know how to simulate the bark.

Marlene


Glue: I saw this idea for glue at one of the schools where I supply teach. If you sometimes just need a "dot" of glue for something, put some tacky glue into one of your plastic film cannisters and keep the lid on obviously keep a supply of toothpicks nearby(maybe even tape some to the cannister.)Then when you need just a dab of glue, it's easy to get. I love my glue syringes, but sometimes, if I haven't been giving it's sponge regular drinks, it could be dried up, and when I need glue, I ususally need it now! Hope this helps with some of those fiddley gluing jobs.

Cheryl


Previous 10 | Next 10


Page 832 of 1032.

Total links in database: 10312.



Search for:


Browse the database (all entries)