Thorne Rooms: For those who live in the Western US or plan a trip to Arizona for the winter, the Phoenix Museum of Art also has a series of the Thorne Rooms on display. Not as many as the Chicago Museum, but enough to make it worth the trip. Here is a link to the museum site: http://www.phxart.org/index_events.html Phoenix Art Museum owns 21 Thorne Miniature Rooms and the rest are in the Art Institute of Chicago (68), the Knoxville Museum of Art (9), The Indianapolis Children's Museum (1), and the Kaye Miniature Museum in Los Angeles (1) Bonnie Gibson, Tucson, AZ |
Wedding Cake: I, too, would use Crayola's model magic. I use acrylic paint to tint it the proper color (very few cakes are pure white). If you don't have cake pans the size you want, you can make a slab the thickness you want, and then cut out the layers using various sizes of tubes, bottle lids, etc. You can cut the layers either before or after it dries. Once it has dried, assemble and frost it. Then you can cut out slices, and they have a cake-like texture - better than any polymer clay. For the frosting, I'd use acrylic gel medium mixed with acrylic paint , or if you want it not so white, you can use some of the dimensional paint that's made to decorate clothing. Marsha Heeter |
Wedding Cake: I use an air dry paper clay tinted with acrylic paints for the layers. This has the best texture I have found for the cake part. You can use cake pans or cut with a cutter to various sizes! Let them dry first before you ice! You can do several things for the frosting, but I think the easier one for a beginner is the dimensional paints used for decorating clothing. If you want an edging that is really simple, you can often manage those with a pin as the paint starts to harden a bit! If you want a fancier edging, I would try it out of Fimo and bake it before I put the frosting on the layers and then position the trim before the frosting dries so it will hold together. Silicon Chalking is another possible frosting and it does not shrink like the paint does either. But the paint does not shrink much - just use it a little thicker than you want the frosting to be. Let it all dry very well before attempting to cut it. Use a very sharp razor blade and pray! Be sure your cut it straight, that is the main thing. If you slant slightly you can trim off a bit more usually! Laura Redman |
Lettuce leaves: You can cut the rough leaf shape from pale green florist's tape and then stretch the edges of the leaves until they are irregular and wavy. Lesley |
Lettuce leaves: I work in either Cernit (my medium of choice) or Fimo to make my lettuces. Barbara and Heather will be my witnesses here, but I manage to get it so thin you can actually see right through it - no, not through the holes in it! I roll my polymer clay to about 1mm thick. Use a rose petal cutter (one of my many cake decorating goodies now that no longer make cakes!) to cut the outer 7 leaves. I then coat the palm of one hand with a thin layer of talc, place the 'petal' on my hand, and using a Jem ball tool (again from cake decorating), very gently start rolling and thinning the outer edge of the petal, gradually working inwards to stretch and frill the leaf. It is necessary to periodically dip the ball tool into a tiny amount of talc to prevent it from sticking. I use a paint palette to rest the leaves in and use a very tiny dot of tacky glue to join the very tip of the leaves where they overlap at the centre. Once those 7 leaves are done, I do 5 more the same way, but cup them gently in the middle when adding into the centre of the previous lettuce "flower." Do another 3 petals, cupping even more firmly. Finally, I roll a thin sausage of clay about 1.5 cm long, and frill one long edge of that, in the same way I frill the petals. This I roll up carefully, trim the inside edge if needed, and fix into place with a spot of glue. I then use a palette knife to very gently lift the lettuce out of the paint palette, place it onto quilt batting on my baking tray and bake as per instructions for the polymer clay used. End result, beautiful, delicate butter lettuce. It takes a bit of practice to get the frilling right. The whole secret being to prevent the ball tool sticking to the clay. I don't like using a metal ball tool as I find it has a greater tendency to tear the leaf as I work. Don't use too much talc - it will make the clay crumbly. The batting does not melt or catch alight or any other such disastrous thing in the oven, and supports the lettuce beautifully. No flattening or collapsing of the leaves, and no shiny baked spots. Karin in South Africa |
Lettuce leaves: I recently tried, with some good results, using the plastic snow flakes for lettuce, after seeing them from another source. I dyed them with green paste food coloring - either stir in a container or shake in a bag. I also tried mixing yellow with it to get different shades of green. These would look good in a tossed salad, or anyplace you need lettuce that isn't a whole head. Connie |
Lettuce leaves: I make lettuce leaves by using 2 small pieces of fimo (medium green and white), squeeze lightly together, do not blend very much, than roll out paper thin, then gently pick it up and tear off many tiny little pieces and put on pan to bake. You may want to roll a few if they did not crinkle enough in the pulling off. Kathleen |
Lettuce leaves:: For cheap and easy lettuce leaves try "flaked rice." I have had a packet for years and if I am wanting loose lettuce leaves I use these to great effect. They will take acrylic paints and if you paint a paler shade all over the leaf and then shade the edge with a darker shade you will have realism. Hint: don't water down your paint with too much water or the lettuce leaves look really wilted! Judy in NZ |
Lettuce leaves: I make individual leaves of lettuce from FIMO. I put balls of various sizes onto a piece of plastic wrap no wider than my pasta machine. To get leaves to use as individual leaves (as opposed to leaves you are going to tear in pieces for a salad) the ball of FIMO should be about the size of a seed bead. I roll this through the pasta machine until I get to the finest setting. Then I take a paper towel piece and roll it through with the plastic. If the leaves aren't thin enough, I'll put another layer of paper towel under and roll again. (Some paper towels are thicker than others.) I then put the piece of plastic wrap on a ceramic tile and bake it. The plastic wrap shrinks and wrinkles and I get lettuce leaves that look very natural. It is sometimes a chore to pull the leaves out from the remains of the plastic wrap, but it's worth it. Marsha Heeter |
Mini Soufflé Dishes: As long as you aren't going to be baking in these, try good old creamer containers. (I wonder if the creamer container industry knows how many of their products end up in doll houses?) I have tried this method using a blade and it doesn't work. However, turn the creamer comtainer upside down on your work table, brace a SHARP pencil on something suitable, and slowly spin the container to make a cutting line on the container. You can cut it with sharp scissors once it's marked. If you cut close to the bottom of the container you have a tart pan. Cut a little farther up and it's a soufflé dish. By cutting closer to the rim, you have a lampshade to paint to match your decor. NOTE: What you use as a BASE to support the pencil depends upon the height of your creamer container and where you need to mark it. A single or double thickness of foamcore or a jar lid will work well, and you can lay the pencil flat or point it down. Dani |
| Previous 10 | Next 10 Page 854 of 1032. Total links in database: 10312. |
|
Browse the database (all entries) |