Porridge: You might try mixing some vermiculite (a component of potting soil) into some white glue to simulate porridge. Alice Zinn |
Porridge: How about mixing white glue with a bit of sawdust for the oatmeal, and then, if necessary, a drop or two of white nail polish for the milk? Dani, in Bradshaw |
Making grapes: The easiest and best way to make grapes that I know and have done, is to retrieve from the herb garden, some fine little sticks from, i.e. thyme, as it has tiny branches on it. Then, dip this twig into glue and dip it then into a little container of mustard seeds. They look wonderful. The rest is for you to decide what colour you want your grapes, purple, green etc. I have used these on a cheese platter and they do look authentic. Pauline (Downunder) |
Dolls by Annie: These may be out of your price range but it is worth looking at. She does the best I have ever see. Note the hands and faces. Also something to ask when you buy figures...will the faces rub off? If you are buying porcelain, more and more are going to acrylic paints which are NOT fired on and will rub off. If you are looking for less expensive dolls, Bonnie Justice does some wonderful children in polymer clay. I do NOT buy anything but porcelain and from the best artists. I DID buy a little girl from Bonnie and she is wonderful! (That is something I swore I would never buy - polymer clay people) Anita McNary-Haynes |
Plastic figures: Sometimes a project will determine the size of the figures that go into it. Example; A chair is a standard size so the figure or doll must be in scale to the chair. Then there is the situation where the figure controls the size of the project. My case in point. I intend to make a mining room box (vignette). With that in mind, I purchased, at the local dollar store, a packet of soldiers made from plastic. Fifty-three (53) little plastic soldiers about 2 1/2 " high for the cost of $1.00. - What I found out! I can repose the figures by placing them in boiling or near boiling water for about 1 to 2 minutes and then remove them and reposition the arm or head or legs the way I want them. With a razor I remove the canteen and back packs and hang grenades etc. I found that putting acrylic paint only had the paint slide all over the place when I attempted to paint the gray figures in any way: - What I found out! I sprayed a figure with my wife's (not mine) hair spray and let that dry. Then I was able to place pupils in the eyes with a 10/0 brush and a 5x magnifier. No running or puddling of the paint. If this is old stuff to some forgive my joy at solving a local problem (local=my work bench). Dr. Bob |
Angel Wings: These will look a bit scruffy after 7-10 years because they are not made with conservation materials but will get you out of an immediate jam. Buy a white feather-winged dove at your local craft store, JoAnn's, etc. Pick up a few extras to use for wreath and tree decorations as well. First cut off the legs (the leg wire is joined to the wing). Carefully insert small sharp scissors at the base of a wing and cut around it being careful not to cut the wires. Gently remove the wing. Trim off the bigger leg wire but leave the smaller wire that goes into the wing proper to use to secure the wing to your angel. Repeat on second wing. If your angel has a plastic or composition body, drill a hole for the wires. (A diamond drill is necessary if it is porcelain and can be tricky so not advised.) The wires can usually be poked into a soft body. Use strong glue and the small wing wires to attach the wings to your angel. You can dry brush the wings with gold paste if an antique effect is desired. Angled correctly, these wings will look very similar to the ones on the 18th-century Neapolitan angels on the Metropolitan Museum (NYC) annual holiday tree/display. If you neaten up the holes where you cut the wings off the dove, you can build a 144th scene inside, using paper wings as "doors". Sammy Smith |
Making 1:12 scale dolls: I'd also like to invite anyone who's interested in making polymer dolls to view "A Doll is Born". In it, I detail the steps I take when creating one of my 1:12 scale art dolls. People have asked me for tips and if this can be of help to anyone, I'll be delighted. Diana in Canada |
When I first started making dolls about 3 months ago, I would spend hours sculpting the head and then make a mould of it, but I soon wanted all my dolls to be different. Now I first make a skull with a nose and eye socket and then bake it. This gives me a much better surface to work on and the nose doesn't get squashed all the time. I also bake 2 tiny eyes in white clay at the same time. When the head is cool, I cover the head with a thin layer of clay and build up the eyes with the pre-baked ones. Doing it this way means I can alter the expression without having to redo the whole head. Pamela in Wales |
1/2"Doll Molds...House of Caron has a good number of 1/2" scale molds including a tiny baby (boy is that a challenge!)-all from different doll artists, and Doreen Sinnett has a beautiful 2 1/2" fairy called Fairy Faye that makes a wonderful lady. Some of the doll's dolls also make good children (I think Janna Joseph has a couple of these). I personally didn't mind doing the dolls but the dressing of them is quite a challenge now that age is creeping up on me. These are the only sources I know of so if anyone else knows of 1/2"molds available please post. Ana |
1/4" Mice and Rabbits: I don't remember who was looking for mice, but I carry 1/4" scale mice and rabbits that are perfect for fantasy settings or 1/4" scale houses. Approximately the same size as quarter scale people, one holding a baby, one serving wench mouse, a mouse on a scooter, etc. Contact me privately if you want pictures shaunpf@centramedia.net. I also updated my web page http://purefantasy.centramedia.com Shaun Crawford |
| Previous 10 | Next 10 Page 866 of 1032. Total links in database: 10312. |
|
Browse the database (all entries) |