Dark Oak: I am not sure this applies to dark oak or not, but I have been told that after Queen Victoria died in 1901 all the furniture came out in very dark finishes - a mourning colour. The idea of smoke from fires darkening it sounds reasonable. June in London Ontario Canada |
Resin Chairs: The chairs you found sound like the "Take a Seat Chairs." Resin, and all around $12 to $14. They are wonderful. I have several. I upholstered the mission rocker with Christmas fabric for my Christmas room and intend to do the same with one of the leather club chairs and ottomans. I just put a light covering of glue and stuck the fabric right to the resin. On one cushion I first added a thin foam before the fabric. They come out great. Fannye in TX |
Hibiscus Bushes: Not only are the blossoms good for stuff, but I make a lot of mini log furniture from my friendly and ever needing pruning, Hibiscus. They like it and I do too. Good easy wood to work with, lots of straights and a neat center that takes well to wire and pins. Dries with integrity too. Judie |
Bathroom fixtures: Directions for making bathroom fixtures from polymer clay (with great pictures) can be found in Sue Heaser's book, "Making Doll's House Miniatures with Polymer Clay." The fixtures are very nice, even a tub with GOLD claw feet! |
Hutches: If you take one of those little inexpensive hutches you are bashing and drill a quarter inch hole in it, one of the light bulb, cord and plug units sold by Houseworks (#2215, "Screw-Base Bulbs" - two to a package) fits the hole exactly. You take off the plug, put it through the hole, and replace the plug. A little touch of glue (not sensitive to heat) will hold it in there - actually, it will stay in without it. I've drilled the hole in the top, and in the back of them. The model of hutch I work with has a design piece mounted on the top which hides the cord coming out of the top; the doors have no "glass" in them at all. I put "stained glass" in the hutches I make - the light behind the glass makes a lighted hutch with stained glass doors. I've seen some very pretty ones done with tiny print fabric or lace mounted in the cabinet doors, gathered on wooden toothpicks and glued to the inside. Terry |
Broken Leg on furniture: The way I repaired a new piece right out of the box was to take a needle, push it into the center of the leg, cut off leaving 1/4", being careful as cut piece may fly, add glue and push leg back into where it broke off. Hope this works the same for you. Alice P. |
Broken Leg on Furniture: I use Superglue gel, not the plain Superglue but the gel. I get it in Wal-mart and it's very reasonably priced. Carol |
Broken Leg on Furniture: I always peg a leg by inserting a small dressmaker's pin, then cutting it off with my wire cutters, or on larger pieces I use a thin toothpick. This provides additional strength in a joint that has been damaged. I use the smallest amount of glue I can apply (usually with the tip of a pin). Be sure to wipe away any glue that oozes out of the repair. I brace the repaired leg by taping with stencil tape to allow it to dry. Stencil tape or painter's tape will not damage surfaces or finishes and removes without a deposit of sticky stuff. I have never had a leg separate again after applying it this way. Becky |
House of Miniatures Furniture Kits: I have a catalog here from the Dollhouse Factory that has about 75 kits listed. It also identifies them as X-Acto. Catalog is $5.50 (it's very fat) - 157 Main St. Lebanon NJ 08833 (908) 236-6404. Peter Bugg |
Metal Stove and Refrigerator: For all of you that are interested in stoves and refrigerators check out the following URL: http://www.kandjminmet.com Karen Fuller's things are wonderful. Both the refrigerator and stove are lighted and are amazingly perfect. Ann Hendricks |
| Previous 10 | Next 10 Page 877 of 1032. Total links in database: 10312. |
|
Browse the database (all entries) |